Kyocera Cell Phone K322 User Manual

 
The standards include a substantial safety margin  
designed to assure the safety of all persons,  
regardless of age and health.  
Additional information on SAR can be found on the  
Cellular Telecommunications and Internet  
Association (CTIA) web-site at  
The exposure standard for wireless mobile phones  
employs a unit of measurement known as the  
Specific Absorption Rate, or SAR. The SAR limit  
set by the FCC is 1.6 W/kg.*  
* In the United States and Canada, the SAR limit  
for mobile phones used by the public is 1.6 watts/  
kg (W/kg) averaged over one gram of tissue. The  
standard incorporates a substantial margin of  
safety to give additional protection for the public  
and to account for any variations in measurements.  
Tests for SAR are conducted using standard  
operating positions specified by the FCC with the  
phone transmitting at its highest certified power  
level in all tested frequency bands.  
Caution  
Although the SAR is determined at the highest  
certified power level, the actual SAR level of the  
phone while operating can be well below the  
maximum value.  
The user is cautioned that changes or  
modifications not expressly approved by the party  
responsible for compliance could void the warranty  
and user’s authority to operate the equipment.  
This is because the phone is designed to operate  
at multiple power levels so as to use only the  
power required to reach the network. In general,  
the closer you are to a wireless base station  
antenna, the lower the power output.  
Optimize your phone’s performance  
Use the guidelines on page 2 to learn how to  
optimize the performance and life of your phone  
and battery.  
Before a phone model is available for sale to the  
public, it must be tested and certified to the FCC  
that it does not exceed the limit established by the  
government-adopted requirement for safe  
exposure. The tests are performed in positions and  
locations (e.g., at the ear and worn on the body) as  
required by the FCC for each model.  
Air bags  
If your vehicle has an air bag, DO NOT place  
installed or portable phone equipment or other  
objects over the air bag or in the air bag  
deployment area. If equipment is not properly  
installed, you and your passengers risk  
serious injury.  
Body-worn measurements differ among phone  
models, depending upon availability of accessories  
and FCC requirements. While there may be  
differences between the SAR levels of various  
phones and at various positions, they all meet the  
government requirement for safe exposure.  
Medical devices  
Pacemakers—Warning to pacemaker wearers:  
Wireless phones, when in the ‘on’ position, have  
been shown to interfere with pacemakers. The  
phone should be kept at least six (6) inches away  
from the pacemaker to reduce risk.  
The FCC has granted an Equipment Authorization  
for this model phone with all reported SAR levels  
evaluated as in compliance with the FCC RF  
emission guidelines. SAR information on this  
model phone is on file with the FCC and can be  
found under the Display Grant section  
The Health Industry Manufacturers Association  
and the wireless technology research community  
recommend that you follow these guidelines to  
minimize the potential for interference.  
Always keep the phone at least six inches  
(15 centimeters) away from your pacemaker  
when the phone is turned on.  
http://www.fcc.gov/oet/fccid after searching on the  
FCC ID: OVFKWC-K24.  
User Guide for the Kyocera K322 Phone  
 
iii  
Do not carry your phone near your heart.  
Areas with a potentially explosive atmosphere are  
often, but not always, clearly marked.  
They include:  
Use the ear opposite the pacemaker.  
If you have any reason to suspect that  
interference is taking place, turn off your  
phone immediately.  
fueling areas such as gas stations  
below deck on boats  
Hearing aids—Some digital wireless phones may  
interfere with hearing aids. In the event of such  
interference, you may want to consult your service  
provider or call the customer service line to  
discuss alternatives.  
transfer or storage facilities for fuel or  
chemicals  
vehicles using liquefied petroleum gas, such as  
propane or butane  
areas where the air contains chemicals or  
particles such as grain, dust, or metal powders  
Other medical devices—If you use any other  
personal medical device, consult the manufacturer  
of the device to determine if it is adequately  
shielded from external RF energy. Your physician  
may be able to help you obtain this information.  
any other area where you would normally be  
advised to turn off your vehicle engine  
Use with care  
In health care facilities—Turn your phone off in  
health care facilities when instructed. Hospitals  
and health care facilities may be using equipment  
that is sensitive to external RF energy.  
Use only in normal position (to ear). Avoid  
dropping, hitting, bending, or sitting on the phone.  
Keep phone dry  
If the phone gets wet, turn the power off  
immediately and contact your dealer. Water  
damage may not be covered under warranty.  
Potentially unsafe areas  
Posted facilities—Turn your phone off in any facility  
when posted notices require you to do so.  
Resetting the phone  
Aircraft—FCC regulations prohibit using your  
phone on a plane that is in the air. Turn your phone  
off or switch it to Airplane Mode before  
boarding aircraft.  
If the screen seems frozen and the keypad does  
not respond to keypresses, reset the phone by  
completing the following steps:  
1. Remove the battery door.  
Vehicles—RF signals may affect improperly  
installed or inadequately shielded electronic  
systems in motor vehicles. Check with the  
manufacturer of the device to determine if it is  
adequately shielded from external RF energy.  
Blasting areas—Turn off your phone where blasting  
is in progress. Observe restrictions, and follow any  
regulations or rules.  
2. Remove and replace the battery.  
If the problem persists, return the phone to the  
dealer for service.  
Accessories  
Use only Kyocera-approved accessories with  
Kyocera phones. Use of any unauthorized  
accessories may be dangerous and will invalidate  
the phone warranty if said accessories cause  
damage or a defect to the phone.  
Potentially explosive atmospheres—Turn off your  
phone when you are in any area with a potentially  
explosive atmosphere. Obey all signs and  
instructions. Sparks in such areas could cause an  
explosion or fire, resulting in bodily injury or death.  
iv  
 
Radio Frequency (RF) energy  
Battery and charger specifications  
Charger Input  
Your telephone is a radio transmitter and receiver.  
When it is on, it receives and sends out RF energy.  
Your service provider’s network controls the power  
of the RF signal. This power level can range from  
0.006 to 0.6 watts.  
Output  
CV90-G2968-01 120VAC 60Hz 7W  
CV90-G2588-01 100-240VAC 50/60Hz 0.2A  
CV90-G2589-01 100-240VAC 50/60Hz 0.3A  
Standard Battery:  
5.2VDC 400mA  
4.2VDC 0.6A  
4.5VDC 1.2A  
In August 1996, the U.S. Federal Communications  
Commission (FCC) adopted RF exposure  
guidelines with safety levels for hand-held wireless  
phones. These guidelines are consistent with the  
safety standards previously set by both U.S. and  
international standards bodies in the  
CV90-P3031-01 3.7V 900mAh  
Extended Battery:  
CV90-P3032-03 1800mAh  
following reports:  
ANSI C95.1 (American National Standards  
Institute, 1992)  
Kyocera Wireless Corp.  
NCRP Report 86 (National Council on  
Radiation Protection and  
Measurements, 1986)  
10300 Campus Point Drive, San Diego, CA 92121  
U.S.A.  
ICNIRP (International Commission on  
Non-Ionizing Radiation Protection, 1996)  
Your phone complies with the standards set by  
these reports and the FCC guidelines.  
E911 mandates  
Where service is available, this handset complies  
with the Phase I and Phase II E911 Mandates  
issued by the FCC.  
User Guide for the Kyocera K322 Phone  
 
v
CONTENTS  
Setting sounds for your phone . . . . . . . . . . . . . 36  
Using shortcuts. . . . . . . . . . . . . . . . . . . . . . . . . 38  
Personalizing the screen. . . . . . . . . . . . . . . . . . 39  
Creating a secure environment . . . . . . . . . . . . . 41  
Setting position location . . . . . . . . . . . . . . . . . . 43  
1
Getting Started. . . . . . . . . . . . . . . . . . . . . . 1  
Installing the battery . . . . . . . . . . . . . . . . . . . . . . 1  
Getting to know your phone . . . . . . . . . . . . . . . . 3  
2
Making and Answering Calls . . . . . . . . . . 9  
Making a call . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
Silencing an incoming call . . . . . . . . . . . . . . . . 10  
Using the speakerphone . . . . . . . . . . . . . . . . . . 10  
Speed dialing . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Setting up voicemail . . . . . . . . . . . . . . . . . . . . . 13  
Understanding roaming. . . . . . . . . . . . . . . . . . . 14  
Using your phone in an airplane . . . . . . . . . . . . 15  
8
9
Using Voice Recognition . . . . . . . . . . . . 44  
Setting up voice dialing. . . . . . . . . . . . . . . . . . . 44  
Making a call using voice tags. . . . . . . . . . . . . . 44  
Making a call using digit dialing . . . . . . . . . . . . 45  
Training voice recognition . . . . . . . . . . . . . . . . 47  
Using the Camera . . . . . . . . . . . . . . . . . . 48  
Taking a picture . . . . . . . . . . . . . . . . . . . . . . . . 50  
Camera key map. . . . . . . . . . . . . . . . . . . . . . . . 50  
3
4
Entering Letters, Numbers,  
and Symbols . . . . . . . . . . . . . . . . . . . . . . 17  
Storing Contacts . . . . . . . . . . . . . . . . . . . 20  
Creating a new contact . . . . . . . . . . . . . . . . . . . 20  
Adding a code or extension. . . . . . . . . . . . . . . . 20  
Customizing your contacts. . . . . . . . . . . . . . . . . 20  
Editing a contact . . . . . . . . . . . . . . . . . . . . . . . . 22  
Erasing a contact. . . . . . . . . . . . . . . . . . . . . . . . 22  
Customizing a phone number . . . . . . . . . . . . . . 22  
Finding contact information . . . . . . . . . . . . . . . 23  
10 Using Media Gallery . . . . . . . . . . . . . . . . 52  
Accessing files . . . . . . . . . . . . . . . . . . . . . . . . . 52  
11 Using Tools and Games . . . . . . . . . . . . . 54  
Voice Memo . . . . . . . . . . . . . . . . . . . . . . . . . . . 54  
Scheduler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54  
Alarm Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . 56  
Tip Calculator. . . . . . . . . . . . . . . . . . . . . . . . . . 56  
Calculator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57  
Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57  
Stopwatch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57  
Games . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58  
5
6
Sending and Receiving  
Text Messages . . . . . . . . . . . . . . . . . . . . . 24  
Sending text messages. . . . . . . . . . . . . . . . . . . . 24  
Retrieving text messages . . . . . . . . . . . . . . . . . . 28  
Customizing message settings . . . . . . . . . . . . . . 29  
12 Connecting to the Internet . . . . . . . . . . . 61  
Using the Web Browser. . . . . . . . . . . . . . . . . . . 61  
Sending and Receiving Multimedia  
13 Getting Help . . . . . . . . . . . . . . . . . . . . . . . 63  
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64  
Messages . . . . . . . . . . . . . . . . . . . . . . . . . 31  
Sending multimedia messages. . . . . . . . . . . . . . 31  
Receiving multimedia messages . . . . . . . . . . . . 32  
Viewing multimedia messages. . . . . . . . . . . . . . 33  
7
Customizing Your Phone . . . . . . . . . . . . 35  
Silencing all sounds . . . . . . . . . . . . . . . . . . . . . 36  
Choosing ringers. . . . . . . . . . . . . . . . . . . . . . . . 36  
vi  
Contents  
 
1
GETTING STARTED  
Installing the battery  
Your Kyocera K322 phone comes with a  
removable lithium ion (LiIon) battery. Fully charge  
the battery before using the phone.  
Charging the battery  
You must have at least a partial charge in the  
battery to make or receive calls.  
To charge the battery:  
Note: You must use a Kyocera-authenticated  
battery in your phone. If you attempt to use a  
battery that has not been authenticated you will  
receive a security warning. Contact your service  
provider to obtain a Kyocera-authenticated battery.  
1. Connect the AC adapter  
to the jack on the bottom  
of the phone.  
2. Plug the adapter into a  
wall outlet.  
To install the battery:  
The battery icon in the upper-right corner of the  
screen tells you whether the phone is:  
1. Hold the phone  
face down.  
Charging (the icon is animated)  
Partially charged  
2. Place your thumb on the  
ribs at the top of the  
battery door and slide the  
battery door downward to  
remove it.  
3. Place the battery in the  
phone casing with the  
metal contacts facing  
towards the bottom end  
of the phone.  
4. Replace the battery door  
by sliding the notches  
into the openings at the  
bottom and outside edges  
of the battery casing.  
5. Slide the door up to secure the cover  
into place.  
Fully charged  
Note: The battery will not charge if you use the  
phone while it is connected to an AC adapter.  
Recharging the battery  
You can safely recharge the battery at any time,  
even if it has a partial charge.  
Note: To remove the battery, make sure the phone  
is powered off.  
User Guide for the Kyocera K322 Phone  
 
1
Caring for the battery  
Accessing keypad shortcuts  
General safety guidelines  
Navigation key  
shortcuts  
Do not take apart, puncture, or short-circuit  
the battery.  
From the home screen, press the navigation key in  
one of four directions to access three shortcuts  
and one custom menu (see page 38 for  
If you have not used the battery for more than  
a month, recharge it before using your phone.  
Avoid exposing the battery to extreme  
temperatures, direct sunlight, or  
high humidity.  
instructions on setting up your custom menu).  
Never dispose of any battery in or near a  
fire. It could explode.  
Common causes of battery drain  
Playing games or using the Web.  
Playing music files.  
Taking pictures with the flash on.  
Keeping backlighting on.  
Operating in analog ( ) mode. Your phone  
switches between modes to find the best  
signal. To set your phone to operate in a single  
mode, select Menu Settings Network →  
Digital/Analog.  
Operating in digital mode when far away from  
a base station or cell site.  
Using data cables or accessories.  
Operating when no service is available, or  
service is available intermittently.  
High earpiece and ringer volume settings.  
Repeating sound, vibration, or lighted alerts.  
2
Getting Started  
 
Getting to know your phone  
The phone is shown here in open position. You must open the flip to use the keys on the lower portion of  
the phone. When the phone is closed, the keys are locked to prevent accidental key presses.  
Home screen.  
1
2
Speakerphone key activates the speakerphone and answers  
incoming calls.  
Left softkey accesses menus and functions.  
3
4
Send/Talk key starts or answers a call. Press once to activate  
voice dialing, twice to display the Recent Calls list, and three  
times to redial the last number dialed.  
Keypad for entering numbers, letters, or symbols.  
*/Shift key changes the text mode in text entry.  
5
6
7
8
0/Next key cycles through word choices during text entry.  
Right softkey accesses the Contacts directory and other  
menu options.  
Navigation key scrolls through lists and text entry fields and  
9
accesses shortcuts from the home screen.  
OK key selects a menu item or option.  
10  
11  
End/Power key turns the phone on and off, ends a call or  
browser session, and returns you to the home screen.  
BACK key erases characters in text entry and returns you to  
the previous screen.  
Space/# key enters a space during text entry. Press and hold to  
12  
13  
activate or deactivate Silent mode.  
User Guide for the Kyocera K322 Phone  
 
3
Jack for Hands-free Headset only (sold separately).  
14  
15  
16  
Volume key to raise or lower ringtone volume.  
Camera key activates Camera mode. To activate Camera  
mode, press and hold until you hear two beeps.  
Camera lens.  
17  
18  
Camera Flash/Message Indicator Light light flashes when  
taking a picture or lights when you have a message or  
missed call.  
External screen displays time, caller ID, signal and  
battery strength.  
19  
20  
Jack for AC adapter (included) and data cable  
(sold separately).  
Warning: Inserting an accessory into the incorrect jack will damage the phone.  
4
Getting Started  
 
Using menus  
The contents of the main menu are as follows:  
Recent Calls  
All Calls  
Incoming Calls  
Outgoing Calls  
Missed Calls  
Erase Call Lists  
Recent Calls Timer OutBox*  
All Calls Timer  
Contacts  
View All  
Messages  
New Text Msg  
Voicemail  
InBox  
Browser Alerts*  
Sent  
Media Gallery  
Camera Pictures  
Images  
Sounds  
Settings  
Silent Mode  
Sounds  
Tools & Games Web Browser  
Brick AttackTM  
Race 21TM  
DoodlerTM  
Voice Memo  
Scheduler  
Alarm Clock  
Tip Calculator  
Calculator  
Timer  
Connects to Internet  
Phone Info  
Build Info  
Icon Keys  
BREW Apps**  
Display  
Saved  
Drafts  
Convenience  
Voice Features  
Messaging  
Security  
Msg Settings  
Group Lists*  
Erase Messages  
Camera  
Launches the camera Accessories  
Gamepad Keymap  
Add New  
Stopwatch  
View Groups*  
Speed Dial List  
Voice Dial List  
Network  
*Not available on all phones. Check with your service provider.  
** Menu name varies by service provider.  
Accessing menu items  
Press  
From the home screen, press  
select Menu or press to select Contacts.  
Press left, right, up, or down to see  
menus and options.  
to view the home screen.  
In this guide, an arrow tells you to select an  
option from a menu.  
to  
For example, Menu Settings means select  
Menu, then select the Settings option.  
Note: To change the way the menus appear, see  
“Choosing a menu view” on page 39 for details.  
Press  
Press  
to select a menu item.  
to back up a menu level.  
User Guide for the Kyocera K322 Phone  
 
5
Performing basic functions  
Note: The phone must be powered ON to perform the following functions.  
To...  
From the home screen...  
Turn the phone on  
Press  
and wait until the phone plays a sound.  
Turn the phone off  
Make a call  
Press and hold  
until the phone plays a sound.  
or press to initiate voice  
Enter the number and press  
dialing. Contact must have voice tag assigned (see page 44).  
End a call  
Press  
Press  
Press  
Press  
.
.
Answer a call  
Adjust volume during a call  
Acknowledge an alert  
up or down.  
when you see OK.  
Silence the ringer on an  
incoming call  
Press  
or  
then  
to answer.  
Access voicemail  
Access menus  
Press and hold  
and follow the system prompts.  
Press  
Press  
Press  
once.  
once.  
Access Contacts list  
Scroll menus  
up and down.  
Select menus  
Highlight a menu or option and press  
Press and hold down.  
once.  
Access Recent Calls list  
Activate Camera mode  
Press and hold the side camera key  
select Capture to take a picture.  
. Focus on the image and  
6
Getting Started  
 
To...  
From the home screen...  
Launch the browser  
Press and hold  
Press and hold  
Press and hold  
left.  
Record a voice memo  
Access Custom Menu  
Verify your phone number  
right.  
up.  
Select Menu Phone Info Build Info  
User Guide for the Kyocera K322 Phone  
 
7
Understanding screen icons  
These icons may appear on your phone’s screen.  
The phone is operating in IS2000 (1X)  
digital mode.  
The phone is operating in IS95  
digital mode.  
The phone is operating in Analog  
(FM) mode.  
The phone is receiving a signal. You can  
make and receive calls. Fewer bars  
indicate a weaker signal.  
The alarm clock is set.  
The phone is in privacy mode or is  
accessing a secure Web site.  
High-speed (3G) data service is available  
and active on your phone. Check with your  
service provider for availability.  
(blinking) The phone is sending  
high-speed data.  
(blinking) The phone is receiving  
high-speed data.  
A call is in progress.  
High-speed data service is available, but  
the phone is dormant.  
The phone is at the home screen. To  
The phone is not receiving a signal. You  
cannot make or receive calls.  
The phone is roaming outside of its home  
service area.  
access Menu, press  
The phone is at the home screen. To  
access Contacts, press  
.
You have a text message.  
.
(
indicates the message is urgent.)  
The phone is set to light up instead  
of ring.  
You have a voice message.  
You have a voice/text message.  
The phone is in camera mode.  
Camera flash mode is ready.  
Camera timer mode is ready.  
Camera zoom mode is ready.  
The phone is set to vibrate or to vibrate and  
then ring.  
Position location is set to your service  
provider and to emergency services.  
Position location is set to emergency  
services only.  
Speakerphone is on.  
The battery is fully charged. The more  
black bars, the greater the charge.  
8
Getting Started  
 
2
MAKING AND ANSWERING CALLS  
Making a call  
Make sure you are in an area where a signal can  
Answering a call  
When a call comes in, the phone rings, vibrates,  
or lights up. The phone number of the caller  
appears on the screen if it is not restricted. If the  
number is stored in your Contacts directory, the  
contact name appears.  
be received. Look for the  
symbol on the home  
screen. The more bars you see in this symbol, the  
stronger the signal. If there are no bars, move to  
where the signal strength is better.  
1. Open the flip.  
When the phone has been idle for a time, it  
changes to power save mode. Press any key to  
return to normal operating mode.  
2. Press  
- or -  
to answer the incoming call.  
1. Open the flip.  
Press  
to answer the incoming call and  
2. Enter the phone number and press  
.
turn on the speakerphone.  
3. Press or close the flip to end the call.  
Answering calls using the flip  
Voice or Digit dialing  
You can make a voice call by speaking the name  
of the person/place you want to call  
You can set the phone to answer immediately  
when you open the flip. This feature does not  
apply to incoming data or fax calls.  
Select Menu Settings Convenience →  
Open to Answer Enabled.  
- or -  
you can speak the digits of a phone number.  
Select Disabled to have the phone  
continue ringing when you open the flip.  
Note: Voice call requires that a contact be saved  
with a voice tag. See “Creating a voice tag for a  
contact” on page 44.  
Adjusting the volume during a call  
1. Press  
.
To adjust the earpiece or speakerphone  
2. Follow the voice prompts to initiate voice or  
volume during a call, press  
or down.  
up  
digit dialing. The phone places the call.  
3. Press  
to end the call.  
User Guide for the Kyocera K322 Phone  
 
9
Silencing an incoming call  
Using the speakerphone  
Your Kyocera K322 phone has a built-in  
speakerphone.  
Press  
Press  
,
, or  
to silence a call.  
if you choose to answer the call.  
- or -  
To turn on the speaker, open the flip and press  
. If you press during an incoming  
call alert, you answer the call.  
Press  
voicemail.  
to select Ignore. The call goes to  
The icon at the top of the phone screen  
indicates that the speakerphone is on.  
Note: Press  
Ignore if Hold Call is enabled. See “Setting the  
to select Options then select  
phone to hold calls”.  
To turn off the speakerphone, press  
.
Note: This action silences the current call only.  
The next call will ring as normal. In the absence  
of voicemail, this feature drops the call.  
Dialing a three-way  
conference call*  
To dial a three-way conference call, dial the first  
Redialing a number  
number and press  
press again.  
, dial the second number,  
To redial a recent call, from the home screen  
press twice to open your Recent Calls list.  
Highlight a phone number or name and  
press  
Tip: To redial the last number called,  
received, or missed, press three times.  
*May not be available on your phone, check with  
your service provider  
.
Setting the phone to hold calls  
The Hold Call feature allows you to place  
incoming calls on hold until you are ready to  
answer them.  
Calling a saved number  
If you have already saved a phone number, you  
can use the Contacts list to find it quickly.  
Note: This feature will not work if “Open to  
Answer” is enabled. See “Answering calls using  
the flip” on page 9.  
1. From the home screen, press  
to  
select Contacts.  
1. Select Menu Settings Convenience →  
2. Scroll down the list to find the contact you  
Hold Call Enabled.  
want to call.  
3. Highlight the name and press  
to dial  
the number.  
10  
Making and Answering Calls  
 
Note: If you have not recorded a hold  
Changing the hold message  
message, you will be prompted to record one,  
such as “Please hold. I’ll answer in a minute.”  
1. Select Menu Settings Convenience →  
Hold Call Re-Record Msg and follow the  
prompts.  
2. Press  
to select Record.  
3. Record the message twice, as prompted.  
2. Record the message twice.  
4. Select Save or Options (Play, Re-Record,  
3. Select Save or Options (Play, Re-Record,  
or Exit).  
or Exit).  
The next time a call comes in, you will have the  
option of placing it on hold.  
Dealing with missed calls  
When you have missed a call, “Missed Call”  
appears on your screen unless the caller  
leaves a voicemail.  
Note: To ignore the call and send it to voicemail,  
press  
to select Options and then select  
Ignore. In the absence of voicemail, this feature  
drops the call.  
To clear the screen, press  
to select OK.  
To view details of the call, press  
to select  
Placing a call on hold  
You can place a call on hold once you have  
enabled this feature.  
Calls then press  
To return the call, press  
then press  
.
to select Calls  
.
Note: If you are already on a call and you receive  
another call, you cannot place the incoming call  
on hold. It will go to voicemail.  
Setting missed call alerts  
You can set an alert to beep every five minutes  
after you have missed a call.  
1. When a call comes in, press  
to select  
1. Select Menu Settings Sounds →  
Options, press  
and then press  
down to select Hold Call  
. The caller will be placed  
Alerts Missed Call Alert.  
on hold and will hear your recorded  
hold message.  
2. Select an option and press  
.
2. To speak to the caller, select Answer.  
- or -  
To hang up without speaking to the caller,  
select End Call.  
User Guide for the Kyocera K322 Phone  
 
11  
Calling recent calls  
1. Press and hold  
Viewing recent call details  
Details on the last 60 calls you made, received, or  
missed are stored in the Recent Calls list and are  
identified by the following icons:  
down.  
2. Highlight the number you want to call and  
press  
.
- or -  
Outgoing call  
Incoming call  
Select Menu Recent Calls.  
Select an option: All Calls, Incoming Calls,  
Missed call (flashing)  
Outgoing Calls, or Missed Calls.  
Viewing recent calls  
1. Select Menu Recent Calls.  
2. Select a list: All Calls, Incoming Calls,  
Highlight the number you want to call and  
press  
.
Outgoing Calls, or Missed Calls.  
Erasing recent calls  
1. Select Menu Recent Calls →  
3. Select a recent call item and press  
to  
select Options:  
Erase Call Lists.  
Save adds the phone number to the  
Contacts list.  
2. Select an option: All Calls, Incoming Calls,  
Outgoing Calls, or Missed Calls.  
Send Text Msg sends a text message to  
the contact.  
3. Press  
to select Yes.  
Send Picture Msg sends a picture message  
to the contact.  
Speed dialing  
Before you can use speed dialing, you must save a  
phone number as a contact and assign a speed  
dial location to it.  
Erase Record erases the selected call  
record.  
Note: If the phone number has been classified as  
“secret,” you must enter your four-digit lock code  
to view or edit it. For information on the lock  
code, see “Changing your lock code” on page 41.  
To classify a phone number as secret, see  
“Creating a new contact” on page 20.  
To add a speed dial location to a saved or new  
contact, see “Customizing a phone number”  
on page 22.  
Using speed dialing  
To call a contact that has a speed dial location:  
From the home screen, enter the one- or two-  
digit speed dialing location and press  
.
12  
Making and Answering Calls  
 
3. Follow the system prompts to create a  
1-Touch dialing  
1-Touch dialing is the fastest way to speed dial a  
contact that has a speed dial location.  
password and record a greeting.  
Note: If you are having trouble accessing your  
voicemail, contact your service provider.  
Note: You must (1) enable 1-Touch dialing on  
your phone and (2) have a speed dial location  
assigned to a contact.  
Checking voicemail messages  
When a voice message is received, your screen  
displays “New Messages” along with the  
symbol at the top of your screen. The symbol  
flashes if the message is urgent.  
Enabling 1-Touch dialing  
Select Menu Settings Convenience →  
1-Touch Dialing Enabled.  
If you see “New Messages”  
Using 1-Touch dialing  
To call a contact that has a speed dial location:  
1. Press  
to select Call, which initiates a call  
to your voicemail number.  
From the home screen, press and hold the  
speed dialing number. If it is a two-digit  
number, press the first digit briefly, then press  
and hold the second digit. For example, if the  
2. Follow the prompts to retrieve the message.  
To clear the screen without checking messages:  
Press  
to select Ignore.  
If you see only the  
symbol  
speed dialing location is 15, press  
then press and hold  
briefly,  
.
1. Press and hold  
to initiate a call to your  
voicemail number.  
Setting up voicemail  
Before your phone can receive voicemail  
2. Follow the prompts to retrieve the message.  
Note: You can set the phone to beep or  
vibrate every five minutes to remind you that  
you have voicemail.  
messages, you must set up a password and record  
a personal greeting with your service provider.  
When you have set up your voicemail, all  
unanswered calls to your phone are automatically  
transferred to voicemail, even if your phone is in  
use or turned off.  
See “Setting message alerts” on page 38.  
Calling emergency services  
Note: Regardless of your 3-digit emergency code  
(911, 111, 999, 000, etc.), your phone operates  
as described below.  
1. From the home screen, press and hold  
2. Press at the message.  
.
User Guide for the Kyocera K322 Phone  
 
13  
Dial your 3-digit emergency code and  
press  
Timing your calls  
You can set your phone to beep 10 seconds  
.
You can call the code even if your phone is locked  
or your account is restricted. When you call, your  
phone enters Emergency mode. This enables the  
emergency service exclusive access to your phone  
to call you back, if necessary. To make or receive  
regular calls after dialing the code, you must exit  
this mode.  
before each minute passes when you are on a call.  
Select Menu Settings Sounds →  
Minute Alert Enabled.  
Receiving data or faxes  
Your phone may be able to receive certain data or  
faxes, depending on the system sending the  
information. For more information, see page 42.  
To exit Emergency mode  
When you have completed the emergency call:  
Understanding roaming  
1. Press  
to select Exit.  
2. Press  
again to confirm your choice.  
Controlling network roaming  
Note: To determine who has access to your  
location, see “Setting position location” on  
page 43.  
Depending on services available from your  
service provider, you may set the phone to either  
digital or analog mode. This is useful if you are in  
an area that borders on digital service and the  
automatic feature is causing the phone to keep  
switching between modes.  
Tracking calls  
You can track the number and duration of calls  
made and received on your phone.  
1. Select Menu Settings Network →  
1. Select Menu Recent Calls.  
Digital/Analog.  
2. Select a timer:  
2. Select an option and press  
.
Recent Calls Timer tracks all calls you  
have made and received since you last  
reset this timer. To reset this timer to zero,  
Automatic automatically switches the  
phone between digital and analog.  
Analog only sets the phone to work in  
analog mode only.  
press  
to select Reset.  
All Calls Timer tracks all calls you have  
made and received. This timer cannot  
be reset.  
Analog call forces a call into analog mode  
for the duration of the next call.  
14  
Making and Answering Calls  
 
Digital only sets the phone to work in  
digital mode only.  
Setting Call Guard  
You can set the phone to warn you before you  
answer or place a call while roaming.  
Setting an alert for roaming  
Select Menu Settings Convenience →  
Call Guard Call prompt.  
You may use this setting if you want the phone to  
alert you when you roam outside of your home  
service area.  
The phone now emits a distinctive roam  
ring to indicate when you are roaming  
during calls.  
1. Select Menu Settings Network →  
Roam/Svc Alert.  
To accept or place a call while roaming,  
2. Select an option and press  
.
you must press  
.
When no svc alerts you with three tones  
Note: Call Prompt is disabled when the phone is  
in Emergency Mode.  
decreasing in pitch when service is lost  
and three tones increasing in pitch when  
service is acquired again.  
Using your phone in an airplane  
On roam change alerts you with two  
decreasing tones when roaming service is  
acquired and three increasing tones when  
home area service is acquired again.  
While in an airplane, it is normally required that  
you turn off your mobile phone because it emits  
RF signals that interfere with air traffic control.  
In Airplane mode, however, your phone will not  
emit RF signals. You cannot make or receive calls,  
send text messages, or use the Web, but you can  
play games, use the Scheduler, set the clock, and  
make emergency calls to designated  
On any change alerts you with three  
increasing tones if there is a change in  
roaming service or three decreasing tones  
if the phone loses service.  
Setting the roam ringer  
You can set a ringer to indicate when an incoming  
call will be subject to roaming charges.  
emergency numbers.  
Please check with uniformed personnel before  
operating your phone in Airplane mode.  
Select Menu Settings Sounds →  
Roam Ringer Enabled.  
User Guide for the Kyocera K322 Phone  
 
15  
Setting Airplane mode  
1. Select Menu Settings →  
Convenience Airplane Mode.  
2. Select OK after reading the message.  
3. Select Disabled or Enabled.  
16  
Making and Answering Calls  
 
3
ENTERING LETTERS, NUMBERS, AND SYMBOLS  
You can enter letters, numbers, and symbols in  
contacts, text messages, and your banner.  
Entering numbers  
To enter a number while in  
a number key once.  
mode, press  
or  
Understanding text entry  
screens  
The current text entry mode (and capitalization  
setting, when applicable) are indicated by icons.  
To enter a number while in  
mode, press and hold a number key until the  
number appears on the screen.  
Entering words letter by letter  
characters  
remaining  
capitalization setting  
text entry mode  
1. Press a key once for the first letter, twice for  
the second letter, and so on. If your phone is  
set to Spanish, accented letters are available.  
text entry  
fields  
2. Wait for the cursor to move right and enter the  
next letter.  
Note: To enter a space, press  
.
Entering words quickly  
When you press a series of keys using  
checks its dictionary of common words and  
guesses at the word you are trying to spell.  
Text entry modes  
There are six text entry modes:  
mode,  
Case change  
Numbers only  
Rapid Entry  
Add Smiley  
Normal alpha  
1. For each letter of the word you want, press the  
Add Symbol  
key once. For example, to enter the word  
“any” press  
2. If the word doesn’t match what you want,  
press to look at other word matches.  
3. When you see the word you want, press  
.
Note: The mode you start in depends on the task  
you are doing. For example, when entering a  
phone number, you’re in number mode. When  
entering a name for a contact, you’re in normal  
text mode. See “Changing modes” on page 18.  
.
User Guide for the Kyocera K322 Phone  
 
17  
Entering symbols  
While entering text, you can enter symbols by  
Changing modes  
Sometimes you need to change modes. For  
pressing  
until you see the symbol you want.  
example, to enter numbers in an email address  
Using this method, you have access to the  
following symbols:  
while in  
mode, enter the numbers, and then change  
back to mode to complete the address.  
To change text entry modes:  
mode, you must change to  
.
@ ?  
To access the full set of symbols:  
1. From the text entry screen, select Options.  
!
-
,
& :  
1
Press and hold  
until the icon for the  
mode you want appears at the top of  
the screen.  
2. Select  
Add Symbol.  
3. Press  
down to view the list of symbols.  
- or -  
4. Press the number key corresponding to the  
Select Options then select a different mode.  
symbol you want.  
Capitalization settings  
You can change capitalization at any time while  
Entering smileys  
1. From the text entry screen, select Options.  
entering text. Simply press  
or lower case while in  
to choose upper  
Normal Alpha mode.  
2. Select  
Add Smiley.  
3. Press  
down to view the list of smileys.  
4. Press the number key corresponding to the  
smiley you want.  
Switching default text entry modes  
You can change the default text entry mode when  
creating a text message. This setting applies only  
to the message body screen, not the “To” screen.  
1. Select Menu Messages →  
Msg Settings Default Text.  
2. Select Normal Alpha or Rapid Mode.  
18  
Entering Letters, Numbers, and Symbols  
 
Quick reference to text entry  
This table gives general instructions for entering letters, numbers, and symbols.  
To...  
Do this...  
Enter a letter  
Use  
mode and press a key until you see the letter you  
want. For more information, see page 17.  
Use mode and press a key once to enter its number.  
For more options, see page 17.  
Enter a number  
Enter a symbol  
Enter a smiley  
Press  
until you find the symbol you want. See page 18.  
Use  
mode and press a key once to enter its number.  
For more options, see page 18.  
Enter a space  
Press  
Press  
.
Erase a character  
.
Erase all characters  
Press and hold  
.
Move the cursor right or left  
Move the cursor up or down  
Change text entry modes  
Capitalize any letter  
Press  
Press  
right or left.  
up or down.  
Press and hold  
.
In  
In  
In  
mode, press  
mode, press  
mode, press  
. Choose  
. Choose  
. Choose  
or  
.
Lowercase any letter  
Change to Initial Caps  
Select soft options on the screen  
.
.
Press the appropriate key,  
Press right or left.  
.
Highlight an option at the bottom  
of the screen  
User Guide for the Kyocera K322 Phone  
 
19  
4
STORING CONTACTS  
Use your phone’s Contacts directory to store  
information about a person or company. Each  
contact entry can have up to six phone numbers,  
two email addresses, two Web addresses, two  
street addresses, and a space for notes.  
Note: From the home screen, you can also press  
to select Contacts and then press to  
select New.  
Adding a code or extension  
When you save the phone number of an  
automated service, you may include a pause to  
stop dialing, for example, where you would wait  
to dial an extension.  
Creating a new contact  
1. From the home screen, enter the phone  
number you want to save, including the  
area code.  
1. From the home screen, enter the phone  
2. Press  
to select Save.  
number.  
3. Press  
to select Save New Contact.  
2. Press  
to select Options.  
4. Enter a name for the contact.  
3. Select a type of pause:  
If you need to learn how to enter letters,  
see “Understanding text entry screens” on  
page 17.  
Time Pause causes the phone to  
stop dialing for two seconds.  
Hard Pause causes the phone to  
stop dialing until you select  
Options Release.  
To add a symbol or smiley to the contact  
name, or to change the text entry mode,  
press  
to select Options.  
4. Enter the remaining numbers.  
5. Either save now or add more contact  
5. Press to select Save.  
information.  
To save now, press  
to select Save.  
Customizing your contacts  
To enter additional phone numbers, email  
and Web addresses, or notes, press  
down repeatedly. For help switching  
between numbers and letters for email or  
Web addresses, see “Changing modes” on  
page 18.  
You can customize each contact in your Contacts  
directory by assigning ringers, pictures, and  
number types, or by classifying your contacts as  
Personal or Business.  
20  
Storing Contacts  
 
Assigning ringers  
1. Press  
Classifying contacts as Personal  
or Business  
to select Contacts.  
1. Press  
2. Highlight a contact and press  
3. Highlight the contact’s phone number and  
press to select Options.  
to select Contacts.  
2. Highlight a contact and press  
.
.
3. Highlight the contact name and press  
to  
select Options.  
4. Select Ringer Assign Ringer.  
4. Highlight Add to Group and press  
5. Scroll down the list to hear the different  
ringers and press  
to select one.  
5. Select Business or Personal and press  
.
Note: To assign Personal or Business ringers, see  
“Assigning business and personal ringers” on  
page 36.  
Assigning pictures  
1. Press  
to select Contacts.  
2. Highlight a contact and press  
.
Assigning number types  
3. Highlight the contact name and press  
to  
select Options.  
When you assign a number type, an icon is placed  
in front of a contact number to specify the type of  
number, such as work, home, or mobile.  
4. Select Picture Assign Picture →  
Camera Pictures and continue at step 5  
1. Press  
to select Contacts.  
- or -  
2. Highlight a contact and press  
.
Select Picture Assign Picture Images.  
Select an option, Saved Images, Wallpapers,  
3. Highlight the contact number and press  
to select Edit.  
or Caller IDs and then press  
5. Scroll through the list to view your options  
and press to assign it to your contact.  
.
4. Press  
down once and press  
.
5. Highlight an option to designate the number  
as General, Work, Home, Mobile, Pager, or  
Note: With mobile PhoneTools for Kyocera, you  
can transfer digital pictures to your phone. To  
purchase MPT or other accessories, visit  
Fax and press  
. You can also add email  
addresses, street addresses, Web page URLs,  
and a note.  
User Guide for the Kyocera K322 Phone  
 
21  
The associated icon will appear next to the  
entry in your Contacts directory and  
Recent Calls list.  
Customizing a phone number  
1. Press  
to select Contacts.  
2. Highlight the contact to edit and press  
.
3. Press  
down to highlight the  
general  
fax  
contact number.  
work  
home  
email address  
street address  
4. Press  
to select Options.  
5. Highlight an option and press  
:
Add Speed Dial assigns or removes the  
speed dial location.  
mobile  
pager  
Web page URL  
note  
Secret makes the number secret so that it  
will not appear on the screen until the  
lock code is entered. Secret numbers can  
be called without a lock code. (For more  
information, see “Limiting calls” on  
page 41.)  
6. Press  
to select Save.  
Editing a contact  
1. Press  
Primary Number makes this number the  
first one that shows up when you open the  
contact.  
to select Contacts.  
2. Highlight a contact and press  
.
3. Highlight the contact name or number and  
press to select Edit.  
Add to Group adds a contact to a Business  
or Personal group.  
4. Enter your changes and press  
to select  
Add Voice Dial to record a voice tag so you  
can call a contact using voice recognition  
(VR). For more information, see page 44.  
Save.  
Erasing a contact  
1. Press  
Erase Voice Dial erases the voice tag  
associated with the number.  
to select Contacts.  
2. Highlight the contact to erase and press  
3. Select Options.  
.
Edit Voice Dial records a new voice tag.  
6. Enter the new information and follow  
4. Highlight Erase Contact and press  
.
the prompts.  
5. Press  
to confirm.  
7. Select Save, if necessary.  
22  
Storing Contacts  
 
Note: To call the contact, highlight the  
Finding contact information  
number and press  
.
To find a phone number or contact, you can (1)  
check the Frequent list, (2) search the Contacts  
directory, or (3) use Fast Find.  
Setting Fast Find  
With Fast Find, you press one or two keys to view  
close matches of the number you are looking for.  
Checking the Frequent List  
Select Menu Settings Convenience →  
From the home screen, select Contacts. The last  
15 of your most frequently called contacts appear  
when the Frequent List is enabled. Scroll past the  
double line to view the All Contacts list.  
Fast Find Enabled.  
Using Fast Find  
1. From the home screen, press the keys  
corresponding to the letters of the name you  
want to find. A matching contact or speed dial  
entry appears.  
To enable the Frequent List setting  
Select Menu Settings Convenience →  
Frequent List Enabled.  
2. Press  
down to scroll through  
Searching the Contacts directory  
matching entries.  
1. Select Contacts for a list of all contacts.  
To quickly get down the list, enter the first  
letter of the contact. The menu skips to that  
letter of the alphabet.  
3. Highlight the name you want then press  
to call the number.  
- or -  
Select Menu Contacts.  
2. Select a search method:  
View All lists all saved contacts.  
View Groups select a contact from  
the specified list, Business List or  
Personal List.  
Speed Dial List or Voice Dial List selects a  
contact from the specified list.  
3. Highlight a contact and press  
.
User Guide for the Kyocera K322 Phone  
 
23  
5
SENDING AND RECEIVING TEXT MESSAGES  
This chapter describes how to send, receive, and  
erase text messages from your phone. For  
information on voicemail messages, see “Setting  
up voicemail” on page 13.  
3. Add another recipient if desired:  
Press  
to select Options then select  
Recent List, Contacts, or Group Lists.  
- or -  
Important: The features and menus described in  
this chapter may vary depending on services  
available in your area. Check with your service  
provider for details and possible usage charges.  
Enter a space or comma after the  
first number then enter another  
recipient manually.  
Note: You can send a message to up to 10  
recipients at once. The messages will be sent  
one at a time, once to each addressee.  
Sending text messages  
You can only send text messages to phones  
that are capable of receiving them or to  
email addresses.  
4. When you are done entering addresses,  
press  
twice.  
5. Enter the message. To learn how to enter text,  
see “Understanding text entry screens” on  
page 17.  
Creating a text message  
1. Select Menu Messages New Text Msg.  
2. Enter a recipient’s phone number or  
- or -  
Add QuickText, symbols, or smileys to your  
message. See “Including prewritten text and  
symbols” on page 25 for information.  
email address:  
Select Options to access your Recent List,  
Contacts, or Group Lists and press  
Select a contact and press  
Highlight the number field and press  
.
6. Press  
to select Send. See “Setting sending  
.
options” on page 25 for information about  
how and when you want the message to  
be received.  
.
For more about group lists, see “Creating  
group lists” on page 29.  
- or -  
Enter a New Address manually. (To learn  
how to enter text, see “Understanding text  
entry screens” on page 17.)  
24  
Sending and Receiving Text Messages  
 
Select a contact and press  
Highlight the number field and press  
.
Including prewritten text and  
symbols  
.
Save Message saves the message in  
your Drafts folder. This prevents the  
message from being deleted if you have  
activated AutoErase and enables you to  
send the message to others.  
During text entry, you can insert QuickText,  
symbols, or smileys into your message.  
1. From the text entry screen, select Options.  
2. Select an option and press  
:
Insert QuickText scroll through the list of  
options and press to select one.  
Save QuickText saves the message you  
have just entered as a prewritten message  
then returns to the message entry screen  
so you can send the message.  
Add Symbol scroll through the list and  
press the corresponding number key  
to select it.  
Settings allows you to choose from the  
Add Smiley scroll through the list and  
press the corresponding number key to  
select it.  
following after pressing  
:
Request Receipt to request notification  
when the message has been received.  
3. When you have finished your message, select  
Send. See “Setting sending options” for  
information about how and when you want the  
message to be received.  
Set Priority labels the message as  
“Urgent.”  
Callback Number includes a callback  
number with the message to let recipients  
know at what number they can call you  
back. Select OK to include your own  
number or Edit to enter a different  
callback number.  
Setting sending options  
When you are ready to send a message, you have  
several options for how and when you want the  
message to be received.  
Send Later schedules a time to send  
the message.  
1. Once you have completed the message,  
select Options:  
Validity Period defines expiration period  
limit for a message.  
Add Address returns to the “Send To”  
screen to add another recipient without  
losing the message. Select Options to  
access your Recent List, Contacts, or  
2. When you have finished setting options, press  
to return to the message window.  
3. Press  
to select Send.  
Group Lists and press  
.
User Guide for the Kyocera K322 Phone  
 
25  
Adding a signature  
The signature you create is included at the end of  
all outgoing messages and is counted as  
Understanding appended messages  
capitalization setting  
characters  
remaining  
text entry mode  
characters in your messages; however, it does not  
appear in the message creation screen.  
text entry  
fields  
To create a signature:  
1. Select Menu Settings Messaging →  
Signature.  
If you go over the character limit for a single  
message, the phone may automatically append an  
empty segment to your message to make space.  
2. Enter your signature in the text field.  
3. Select OK to save the setting.  
Note: The characters in the signature are  
included in the total character count of the  
message. See the note under step 5 in “Creating a  
text message” on page 24.  
Important: Your service provider will charge you  
for each message segment.  
When you start a message, the maximum  
character limit appears once you are in the  
message entry field. This number counts down as  
you enter characters, until it reaches 0.  
If you cannot send messages  
You may not be able to send or receive messages  
if your phone’s memory is nearly full, or if digital  
service is not available at the time. To free up  
memory, erase old messages. See “Erasing  
messages” on page 29.  
If you continue to enter text after this counter  
reaches 0, a message segment may be appended.  
When you reach the message size limit, you are  
prompted to edit the message or alerted that the  
message is being appended.  
Receiving incoming calls while  
creating messages  
If you don’t wish to answer the call, press  
to select Ignore. The phone returns to the  
message screen.  
26  
Sending and Receiving Text Messages  
 
To answer the call, press  
. Your message  
The message has been received and  
opened. (This symbol may not be  
available. Check with your service  
provider.)  
is saved to the Drafts folder. To return to the  
message, select Menu Messages →  
Drafts Resume.  
Viewing your sent messages  
To save your outgoing messages, you must first  
The message has been sent to more than  
one recipient.  
enable Save to Sent.  
The message has never been sent or has  
not been sent since it was last modified.  
You can cancel delivery of the message.  
1. Select Menu Messages →  
Msg Settings Save to Sent.  
2. Select an option and press  
.
Enabled automatically saves all  
successfully sent messages in the  
Sent folder.  
Viewing failed or pending messages  
Failed or pending messages are stored in  
your OutBox. To view your OutBox:  
Prompt allows you to choose whether or  
not to save your message when you send it.  
1. Select Menu Messages OutBox. A list of  
all failed or pending messages appears.  
To view successfully sent messages:  
2. Scroll through the list of messages and press  
to read one. One of the following  
1. Select Menu Messages Sent.  
2. Press  
up or down to scroll through the  
symbols appears next to each message:  
list of messages. One of the following symbols  
appears next to each message:  
The message is pending and will be sent  
when possible. You can cancel delivery of  
the message.  
The scheduled message will be sent at the  
scheduled time. You cannot cancel  
delivery of the message.  
The message cannot be sent  
because service is not available. An alert  
appears on your phone if the message  
cannot be sent.  
The scheduled message has been sent and  
will be delivered as scheduled. You  
cannot cancel delivery of the message.  
The message has been received.  
User Guide for the Kyocera K322 Phone  
 
27  
Reading the message  
The options available to you may vary. Check with  
your service provider.  
Retrieving text messages  
When a text message is received, the outer screen  
displays “New Text”, the inner screen displays  
“New Messages” with the  
of your screen. The symbol flashes if the message  
is urgent.  
symbol at the top  
1. If the text message is long, press  
down  
to view the entire message.  
2. When you are finished, you can press  
to  
Reply to the sender or press  
to select  
If you see the “New Messages” note  
additional Options:  
To view the message, press  
to select  
InBox, highlight the message, and press  
to select View.  
Erase the message.  
Lock Msg to protect the message from  
To Ignore the message, press  
.
being accidentally deleted.  
Forward the message.  
Note: If you receive a new message while you are  
reading a message, the one you are reading will  
be replaced by the new one. You can find the  
older message in the InBox:  
Reply with Copy to reply to the message  
with a copy of the original attached.  
Save Message to save the message.  
Select Menu Messages InBox.  
Save as QuickText to save the text from the  
message as QuickText, which you can  
insert into other messages. Graphics and  
sound are not saved as part of  
QuickText.(For more about QuickText, see  
page 30.)  
If you see the  
symbol  
1. Select Menu Messages InBox. A list of  
all your received messages appears.  
indicates an “Urgent” message.  
2. Scroll through the list of messages and press  
View Sender information.  
to read one.  
Note: The  
symbol indicates that a graphic did  
not come through. It may be too large or  
incorrectly formatted.  
Setting message alerts  
You can set your phone to alert you of incoming  
text messages or pages. For more information,  
see “Setting message alerts” on page 38.  
28  
Sending and Receiving Text Messages  
 
2. Select a folder from which to erase all  
messages: InBox, OutBox, Sent, Saved Folder,  
Drafts Folder, or All Messages. To erase  
messages from all folders, select  
All Messages.  
Erasing messages  
It is a good idea to erase old messages to free up  
memory in your phone.  
You have the option of erasing text messages and  
pages as you send or read them, erasing them one  
at a time from the list in the OutBox or InBox, or  
erasing them all at once.  
3. A message appears: “Erase all messages?”  
Select Yes to erase messages or No to cancel.  
Erasing messages automatically  
Erasing single messages  
1. Select Menu Messages.  
2. Select the type of text message you want to  
Use this setting to have old messages  
automatically erased from the InBox when  
memory is low.  
erase and press  
: InBox, OutBox, Sent,  
Select Menu Messages →  
Msg Settings Auto-Erase →  
Old InBox Msgs.  
or Saved.  
3. Highlight the message to erase and  
press  
.
Older messages will be erased as new  
messages are received.  
4. Select Options.  
5. Select Erase to erase the message. A message  
appears: “Erase this message?”  
Customizing message settings  
To make messaging easier, you can customize  
settings for sending and receiving messages.  
6. Select Yes to erase the message.  
Note: You can erase a scheduled message from  
the OutBox, but you cannot cancel delivery of  
the message.  
Creating group lists  
You can create and save a list of multiple  
recipients. Your Kyocera K322 phone stores five  
group lists with up to 10 recipients per list.  
Erasing all messages  
1. Select Menu Messages →  
Erase Messages.  
1. Select Menu Messages Group Lists →  
Create New.  
2. Enter a name for the list. For help entering  
text, see “Understanding text entry screens”  
on page 17.  
User Guide for the Kyocera K322 Phone  
 
29  
3. Select Next.  
2. To create a new pre-written message,  
select New Msg.  
4. To enter the first phone number or email  
address, select an option:  
- or -  
Recent List to select numbers from your  
Recent List.  
To edit an existing pre-written message,  
highlight the message and select Edit.  
Enter from Scratch to enter the phone  
number or email address manually.  
3. Enter or edit the text.  
Note: To change text mode press  
to select  
Contacts List to select numbers from your  
phone book.  
Options. Press  
to select Text Mode or you  
can choose Information for text mode help. For  
additional help entering text, see “Understanding  
text entry screens” on page 17.  
5. Locate the contact number and press  
.
6. Select Options Recent List or Contacts.  
7. Locate the contact number and press  
4. Press  
to select Save.  
.
Note: You can also save a message you have  
written or received as QuickText. See “Setting  
sending options” on page 25 or “Reading the  
message” on page 28.  
8. When finished, select Done.  
To send a message to your new group, see  
“Sending text messages” on page 24.  
Creating and editing prewritten  
messages (QuickText)  
Your phone comes with prewritten (QuickText)  
messages, such as “Please call me,” which you  
can insert into the body of a text message. You can  
edit these messages and create new ones. Your  
phone will store up to 40 QuickText messages,  
with up to 100 characters per message.  
1. Select Menu Messages →  
Msg Settings Edit QuickText.  
30  
Sending and Receiving Text Messages  
 
6
SENDING AND RECEIVING MULTIMEDIA MESSAGES  
Note: You can send one multimedia message  
to a maximum of 10 recipients.  
Sending multimedia messages  
You can only send multimedia messages to  
phones that are capable of receiving them or to  
email addresses.  
You can choose to send a copy or blind copy.  
4. Press  
down to enter a recipient in the  
CC or BCC fields.  
Note: The multimedia messages feature is not  
available on all phones. Check with your  
service provider.  
5. Press  
down to enter a message in the  
Subject field. Choose a method:  
Enter the subject text manually, or  
Multimedia messages have a predetermined  
character and file size limit. When you reach the  
character and file size limit for a single  
multimedia message, you must edit the message  
to meet the size limitation.  
Press  
to select Options.  
6. Press  
down to enter a brief text  
message in the Text field.  
Enter the text manually, or  
Note: For details, check with your  
service provider.  
Press  
to select Options.  
7. Press  
down once to enter an image in  
the Image field.  
Creating a multimedia message  
1. Select Menu Messages →  
Note: You may add only one picture per  
multimedia message.  
New Picture Msg.  
8. Press  
to select Options. Select an option:  
2. Enter the recipient’s phone number or email  
address in the To field.  
Take Picture to instantly take a new photo  
and attach it to your message.  
3. To add additional recipients:  
Media Gallery to access all picture files in  
the phone:  
Enter a space or comma after the first phone  
number or email address, then enter another  
recipient manually  
Camera Pictures displays your photos  
- or -  
taken in a table/thumbnail view.  
Press  
to select Options. Then select  
Contacts or Group Lists.  
User Guide for the Kyocera K322 Phone  
 
31  
• Highlight a photo to add to the  
multimedia message. Press  
to choose Select.  
Message Priority allows you to send  
your multimedia message with Normal or  
Urgent priority.  
Images displays stored images on  
11. Press  
to select Send. This will send your  
the phone.  
multimedia message.  
9. Press  
down once to enter the Sound  
Receiving multimedia messages  
field and press  
to select Options. Choose:  
There are two settings for receiving a multimedia  
message on your K322 phone: Auto receive  
(default) and Prompt.  
Record Sound to instantly record a new  
sound and attach it to your message.  
Media Gallery to display a list of  
categories that contain saved or  
downloaded sounds and voice memos.  
Auto retrieve mode  
When a multimedia message is received, it is  
automatically downloaded onto your phone.  
– Highlight Saved Sounds.  
Press  
to select OK.  
The alert “New Message(s)” appears along with  
the text “Message Received. View now?”  
– Highlight a sound to add to the  
multimedia message. Press  
choose Select.  
to  
To View the multimedia message, press  
To view Later, press  
.
.
Note: You may add only one new or stored  
Note: If a multimedia message is received  
during a call, then the phone downloads the  
message approximately one minute after the last  
key is pressed.  
sound per multimedia message sent.  
10. Before sending your message, press  
to  
select additional Options. Choose:  
Preview Message plays your multimedia  
message prior to sending.  
Note: To activate Auto Retrieve mode:  
1. Select Menu Messages Msg Settings.  
Save Message allows you to save your  
multimedia message to the Drafts Folder  
and send it later.  
2. Press  
up or down to scroll through the  
list.  
Add Address allows you to add additional  
addresses to your multimedia message  
prior to sending it.  
3. Highlight Auto Retrieve.  
32  
Sending and Receiving Multimedia Messages  
 
4. Press  
to select Auto Retrieve.  
Viewing multimedia messages  
Enabled downloads messages  
When you receive a multimedia message, a  
automatically from the server.  
appears on your phone’s screen and remains until  
all messages are viewed. The message is stored in  
the InBox until the full message has been received,  
regardless of the auto receive or prompt setting.  
Disabled will prompt you for download,  
when a Pix Alert is received.  
Prompt mode  
1. Press  
the message is long, press  
the entire multimedia message.  
2. Press to select Options. Press  
to View the multimedia message. If  
When a multimedia message is received, your  
screen displays the alert “New Message(s)” along  
with the question “Retrieve Now?”  
down to view  
down  
To View the multimedia message, press  
.
to highlight additional options for the multimedia  
message (options vary according to selection):  
Select Erase to never download the  
multimedia message.  
Note: The options available to you may vary.  
To view Later, press  
.
Check with your service provider.  
Mute to silence the message.  
Note: If a multimedia message is received during  
a call, then the phone screen displays the alert  
“New Message(s)” after the call ends.  
Erase Msg allows you to delete the  
currently displayed multimedia message.  
To activate Prompt mode:  
Forward launches the message creation  
screen, allowing you to forward the  
multimedia message. The original address  
will not be shown, nor will the graphic,  
sound, and text fields.  
1. Select Menu Messages Msg Settings.  
2. Press  
up or down to scroll through the  
list.  
3. Highlight Auto Retrieve and press  
4. Press up or down through the list and  
highlight Disabled. Press  
.
Lock Msg to avoid accidentally erasing it.  
Message Info displays multimedia  
message information (priority, sender,  
subject, time sent and received, and  
message size).  
.
Replay plays the multimedia message  
again from the beginning.  
Done exits the multimedia message.  
User Guide for the Kyocera K322 Phone  
 
33  
Call initiates call to sender of  
multimedia message.  
Save Picture saves the currently  
viewed picture embedded in the  
multimedia message.  
Save Sound saves the current sound  
embedded in the multimedia message.  
Save Address extracts email addresses,  
phone numbers, and/or URLs from the  
sender information and multimedia  
message body.  
Save as QuickText saves the text in the  
multimedia message to the QuickText list.  
Save Message saves the multimedia  
message to the Saved Folder on the phone.  
3. When you are finished viewing the multimedia  
message, select Reply or press  
.
34  
Sending and Receiving Multimedia Messages  
 
7
CUSTOMIZING YOUR PHONE  
The contents of the Settings menu are as follows.  
Silent Mode  
Vibrate Only  
Display  
My Banner  
Voice Features  
Add Voice Dial  
Network  
Data/Fax Calls  
Vibe then Ring  
Lights Only  
Normal Sounds  
Main Menu View  
Color Themes  
Wallpaper  
Screen Saver  
Backlighting  
Auto-Hyphen  
Language  
Time/Date Format  
Contrast  
Brightness  
Erase Voice Dial  
Voice Training  
Voice Wake-Up  
Voice Answer  
Expert Mode  
Privacy Alert*  
Set Phone Line*  
Roam/Svc Alert  
Roam Option  
Digital/Analog  
Location  
Sounds  
Ringer Volume  
Ringer Type  
Business Ringer  
Personal Ringer  
Roam Ringer  
Flip Open  
Flip Closed  
Pwr On/Off Sound  
Key Volume  
Messaging  
Alerts  
Signature  
Edit QuickText  
Callback Number  
Text Msg Receipt  
Save to Sent  
Accessories  
Pwr Backlighting  
Headset Ringing  
Auto-Answer  
Com Port Speed  
TTY Device  
Convenience  
Airplane Mode  
Open to Answer  
Fast Find  
Auto-Erase  
Default Text  
Gamepad Keymap*  
Edit  
Key Length  
Key Sound  
Alerts  
Smart Sound  
Minute Alert  
Earpiece Volume  
Spkrphone Volume  
Frequent List  
Hold Call  
1-Touch Dialing  
Web Prompt  
Call Guard  
Voicemail Num.  
Reset  
Security  
Lock Phone  
Limit Calls  
New Lock Code  
Erase Contacts  
Emergency Numbers  
*Not available on all phones. Check with your service provider.  
User Guide for the Kyocera K322 Phone  
 
35  
Turning sounds back on  
Press and hold  
Silencing all sounds  
.
Your phone is set to make sounds when you  
receive calls, press keys, navigate through menus,  
and receive alerts (such as new messages).  
You can silence all sounds and set the phone to  
vibrate or light up when you receive calls  
and alerts.  
Choosing ringers  
Your Kyocera K322 phone has multiple ringers  
you can choose to use for incoming calls.  
1. Select Menu Settings Sounds →  
Ringer Type.  
Setting the phone to vibrate or  
light up  
2. Scroll down the list to hear the different rings  
and press  
to select one.  
1. Select Menu Settings Silent Mode.  
2. Choose an option and press  
Note: Downloaded ringers are added to the end  
of the standard list of ringers.  
:
Vibrate Only the phone vibrates for the  
duration of the incoming call or other  
alerts. appears.  
Assigning business and  
personal ringers  
Vibe then Ring the phone vibrates for the  
first 10 seconds and then rings for the  
remainder of the incoming call alert.  
appears.  
Lights Only the phone lights up for the  
duration of the incoming call or other  
alerts. appears.  
Normal Sounds the phone rings for the  
incoming call or alert (in effect, returns  
phone to a non-silent mode).  
You can assign ringers to contacts classified as  
Business or Personal in your Contacts directory.  
Note: To classify a contact as Business or  
Personal, see page 20.  
1. Select Menu Settings Sounds.  
2. Highlight Business Ringer or Personal Ringer  
and press  
.
3. Select a ringer and press  
.
Setting sounds for your phone  
Note: The phone will ring when it is attached to  
an external power source (such as a charger),  
even if all sounds have been silenced.  
You can set your phone to sound tones when you  
open and close the flip and when you turn the  
phone on and off. Sounds will not occur during  
an incoming call, if you are in a call, or if a  
headset or hands-free car kit is attached to  
your phone.  
Shortcut to Vibrate Only mode  
Press and hold  
.
36  
Customizing Your Phone  
 
Using smart sound  
Set sound when flip opens  
1. Select Menu Settings Sounds →  
Flip Open.  
You can set a baseline volume that the phone uses  
to automatically adjust the earpiece volume when  
there is a change in the amount of noise around  
you or the caller’s voice.  
2. Scroll through the list to hear the sounds and  
press  
to select one.  
Select Menu Settings Sounds →  
Smart SoundEnabled.  
Set sound when flip closes  
1. Select Menu Settings Sounds →  
Flip Closed.  
Adjusting the ringer volume  
1. Select Menu Settings Sounds →  
2. Scroll through the list to hear the sounds and  
Ringer Volume.  
press  
to select one.  
2. Press  
right to increase the volume, or  
Set sound when phone powers on  
or off  
left to decrease the volume.  
3. Press  
to select Save.  
Select Menu Settings Sounds →  
Adjusting speakerphone volume  
1. Select Menu Settings Sounds →  
Pwr On/Off Sound Enabled.  
Select Disabled to deselect this sound.  
Spkrphone Volume.  
2. Press  
left to decrease the volume.  
3. Press  
right to increase the volume, or  
Adjusting volume  
You can adjust the earpiece, speakerphone, and  
ringer volume as well as key tones.  
to select Save.  
Adjusting key tone volume  
You can change the volume of the tones the phone  
makes when you press the keys.  
Adjusting the earpiece volume  
To adjust the earpiece volume manually during a  
call, press  
or  
up or down.  
1. Select Menu Settings Sounds →  
To set the earpiece volume:  
Key Volume.  
1. Select Menu Settings Sounds →  
2. Press  
right to increase the volume, or  
Earpiece Volume.  
left to decrease the volume.  
2. Press  
right to increase the volume, or  
3. Press  
to select Save.  
left to decrease the volume.  
3. Press  
to select Save.  
User Guide for the Kyocera K322 Phone  
 
37  
Setting key length  
You can change the duration of the tones the  
phone makes when you press the keys.  
Setting alerts for your headset  
When a headset (sold separately) is attached to  
the phone, you can set alert sounds to originate  
from the headset.  
1. Select Menu Settings Sounds →  
Key Length.  
1. Select Menu Settings Accessories →  
Headset Ringing.  
2. Choose Normal or Long and press  
.
Select Out of headset to have alerts originate from  
the headset.  
Setting message alerts  
You can choose how you want be alerted of  
incoming voicemail, pages, or text messages.  
Using shortcuts  
From the home screen, press  
directions to access three shortcuts and one  
in one of four  
1. Select Menu Settings Sounds →  
Alerts.  
custom menu.  
2. Select the type of alert: Message Alert,  
Page Alert, Voicemail Alert or  
Missed Call Alert.  
Up: Access your Custom Menu  
Down: Access Recent Calls  
Left: Launch Web Browser  
Right: Record Voice Memo  
3. Press  
to select an option:  
Vibrate, Beep, Freeway, Game, Bloop,  
Winner, Zilofon sets the phone to alert you  
once when a new message is received.  
Creating and updating your  
custom menu  
Vibrate & Remind, Beep & Remind, FwY &  
Remind, Game & Remind, Bloop &  
You can create a custom menu that contains your  
favorite features. After you set up your menu,  
simply press and hold  
1. Press and hold  
Custom Menu.  
2. Press  
Remind, Winner & Remind, Zilofon &  
Remind sets the phone to notify you once  
when a new message is received and then  
notify you again every five minutes. To stop  
up to access it.  
up to launch  
to select Edit.  
a reminder alert, press  
to  
select Ignore.  
3. Scroll through the menu list and press  
to  
select or deselect your favorite features.  
Disabled turns off message alerts.  
38  
Customizing Your Phone  
 
You may select more than one menu item.  
Items appear in alphabetical order in  
the menu. A check mark appears in the  
box when selected.  
Graphic displays icons of each menu item,  
with its name at the bottom of the screen.  
List displays a list of each menu item.  
Wheel displays a rotating graphic image of  
4. Press  
to select Save.  
the menu items.  
3. Press  
to return to the home screen. The  
Choosing a different language  
Your phone may display alternative languages.  
next time you select Menu, you will see the  
menu view you selected.  
1. Select Menu Settings Display →  
Adjusting the backlighting  
Language.  
Your screen lights up while you are in a call or  
when you press a key on the keypad. However,  
you can set the length of time that bright  
backlighting remains on.  
2. Select a language and press  
.
Personalizing the screen  
Changing your banner  
1. Select Menu Settings Display →  
Backlighting Duration.  
The banner is the personal label for your phone.  
It appears on the home screen above the time and  
date. The banner can be up to 14 characters long.  
2. Select an option and press  
:
7 seconds, 15 seconds, or 30 seconds—  
1. Select Menu Settings Display →  
(Default) Turn backlighting on for 7, 15,  
or 30 seconds after your last keypress.  
My Banner.  
2. Press  
3. Press  
4. Enter your new text.  
5. Press  
to select Edit.  
to clear the screen.  
7 sec. & in call, 15 sec. & in call, or 30 sec.  
& in call—Turn backlighting on for the  
duration of a call, and for 7, 15, or 30  
seconds after your last keypress.  
to select Save.  
Note: The “in call” settings drain the battery  
more quickly.  
Choosing a menu view  
Three menu views are available: Wheel, Graphic,  
and List.  
Using Power Save Mode  
You can conserve battery life by activating Power  
Save mode to dim the backlight. The backlighting  
appears for the selected duration but is less bright  
than with Power Save off.  
1. Select Menu Settings Display →  
Main Menu View.  
2. Select an option and press  
.
User Guide for the Kyocera K322 Phone  
 
39  
Select Menu Settings Display →  
Selecting a screen saver  
Backlighting Pwr Save Mode On.  
Screen savers appear on the home screen when  
the flip is open or closed and are activated 10  
seconds after the last keypress. Incoming calls  
and alerts override screen savers.  
Setting power backlighting  
You can set backlighting to remain on when an  
external power source, such as the AC adapter, is  
used with the phone.  
1. Select Menu Settings Display →  
Screen Saver.  
Note: Power backlighting may not be available  
with the optional desktop charger or  
other accessories.  
2. Highlight a screen saver and press  
. The  
image displays.  
3. Press  
to assign the screen saver.  
Tip: Use the power backlighting as a night light  
when traveling.  
1. Select Menu Settings Accessories →  
4. Press  
to return to the home screen  
and wait 10 seconds to view the screen saver  
you chose.  
Note: Downloaded screen savers are added to  
Pwr Backlighting.  
2. Select Always On to keep backlighting on.  
the end of the list.  
Note: The battery charges more slowly when  
Selecting wallpaper  
Wallpaper appears on the home screen.  
power backlighting is on.  
Changing the display contrast  
1. Select Menu Settings Display →  
1. Select Menu Settings Display →  
Wallpaper.  
Contrast.  
2. Highlight a wallpaper design and press  
3. Select Assign to save your selection.  
.
2. Press  
left or right to adjust the contrast  
and select Save.  
4. Press  
to return to the home screen.  
Setting numbers to auto-hyphenate  
Selecting a color theme  
You can select a color theme for the display  
background of your phone.  
Auto-hyphenation, when enabled, automatically  
inserts hyphens into your phone numbers to be  
consistent with the U.S. dialing plan.  
For example, 1-222-333-4444.  
1. Select Menu Settings Display →  
Color Themes.  
Select Menu Settings Display →  
Auto-Hyphen Enabled.  
2. Scroll through the options to view the  
color themes and press  
to select one.  
40  
Customizing Your Phone  
 
On power up locks the phone every time  
you turn it on.  
Now locks the phone immediately.  
Choosing a different time/date format  
1. Select Menu Settings Display →  
Time/Date.  
5. Press  
.
2. Highlight an option and press  
.
Unlocking the phone  
Creating a secure environment  
1. From the home screen, press  
select Unlock.  
2. Enter your four-digit lock code.  
to  
This section describes all the features involved in  
securing your phone and preventing access to  
personal information. All security features are  
shielded by a four-digit lock code.  
Designating emergency numbers  
The emergency numbers feature allows you to  
specify three personal phone numbers that can be  
called when the phone is locked.  
1. Select Menu Settings Security.  
2. Enter your four-digit lock code.  
3. Select Emergency Numbers.  
4. Select an Unassigned slot.  
Changing your lock code  
The lock code is typically 0000 or the last 4 digits  
of your phone number.  
1. Select Menu Settings Security.  
2. Enter your four-digit lock code.  
3. Select New Lock Code. A message appears:  
“Change Code?”  
5. Enter the phone number, including the area  
4. Press  
digit code.  
to select Yes and enter a new four-  
code. Do not enter 1 before the area code.  
6. Press  
to select Done.  
5. Enter your new lock code again.  
Note: To make a call to an emergency number  
from a locked phone, you must dial the number  
(including area code) exactly as it was stored in  
Emergency Numbers.  
Locking your phone  
When your phone is locked, you can call only  
emergency numbers or your service provider’s  
number. You can still receive incoming calls.  
1. Select Menu Settings Security.  
2. Enter your four-digit lock code.  
3. Select Lock Phone.  
Limiting calls  
You can limit the calls that can be made from your  
phone to emergency numbers, your contacts, and  
your service provider’s numbers.  
4. Highlight an option:  
1. Select Menu Settings Security.  
Never does not lock the phone.  
User Guide for the Kyocera K322 Phone  
 
41  
2. Enter your four-digit lock code.  
3. Select Limit Calls.  
4. Choose an option and press  
Note: You must first establish a second phone  
line with your service provider. Once established,  
a second phone number becomes available in the  
menu for selection:  
:
No Limit limits no calls.  
Limit Outgoing calls only. Incoming calls  
1. Select Menu Settings Network →  
Set Phone Line.  
can still be received and answered.  
2. Select one of the two lines and press  
.
Limit All calls, both incoming  
and outgoing.  
Data Settings  
Erasing all contacts  
You can erase all entries from your  
Contacts directory.  
1. Select Menu Settings Security.  
2. Enter your four-digit lock code.  
3. Select Erase Contacts.  
Setting Com port speed  
The Com Speed sets the data rate at which your  
phone connects to a laptop or PC, or at which it  
sends and receives over-the-air text messages.  
1. Select Menu Settings Accessories →  
Com Port Speed.  
4. Select Yes to erase all contacts. A message  
2. Select the speed. The options are: 19.2 kbps,  
appears: “Erase ALL Contacts?”  
115.2 kbps (default), 230.4 kbps, and Other.  
5. Press  
to select Yes to erase all contacts.  
Note: There may be a higher charge for  
making calls using high-speed data in areas  
where 1X service is available. Check with your  
service provider for details.  
Network settings  
Switching between phone lines  
Setting the phone to receive data  
or faxes  
Your phone can have two service accounts, or  
phone lines, associated with it. Each phone line  
has its own phone number.  
When you are using one line, you cannot receive  
calls from the other. It would be as if the phone  
were “off” for that number. Your voicemail,  
however, will still take messages. All contacts and  
settings are shared for both lines.  
Your phone may be able to receive certain data or  
faxes, depending on the system sending the  
information. You cannot receive voice calls while  
the phone is in data/fax mode.  
To receive data or faxes, you must connect the  
phone to a laptop or PC and switch the phone  
from voice mode to data/fax mode.  
42  
Customizing Your Phone  
 
Note: To purchase a cable, call 800-349-4188  
(U.S.A. only), 858-882-1410, or visit  
Setting position location  
This setting allows you to share your location  
information with network services other than  
emergency services (For example: 911, 111, 999,  
and 000) in markets where service has  
been implemented.  
1. Connect the phone to the laptop or PC.  
2. Set the Com speed.  
3. Select Menu Settings Network →  
Data/Fax Calls.  
Note: This feature works only when your phone is  
in digital mode. You do not have the option of  
turning off the locator to emergency services.  
4. Press  
to select an option:  
Voice only allows only voice calls.  
1. Select Menu Settings Network →  
Fax, next call or Data, next call sets the  
phone to fax mode or data mode for the  
next incoming call or the next 10 minutes.  
Location.  
2. Select 911 Only or Location On.  
911 Only (default) shares your position  
information only with emergency services  
when you call your 3-digit emergency  
code (911, 000, 111, etc.).  
Fax, until off or Data, until off forces the  
phone into fax mode or data mode until  
the phone is turned off.  
Connecting to a TTY/TDD device  
You can connect the phone to a TTY device for the  
hearing impaired.  
Location On shares your position  
information with your service provider’s  
network, in addition to  
emergency services.  
Note: Enable TTY only when using the phone with  
a TTY device.  
1. Connect the TTY device to the phone.  
2. Enter  
your keypad.  
3. Press to select the TTY option.  
from  
4. Close the Information window by pressing  
to select OK.  
5. Highlight TTY On and press  
.
User Guide for the Kyocera K322 Phone  
 
43  
8
USING VOICE RECOGNITION  
Voice recognition allows you to make and  
answer calls by speaking commands into the  
phone’s microphone.  
Editing a voice tag  
1. Select Menu Contacts Voice Dial List.  
2. Highlight the contact to edit, and press  
.
Note: You cannot use voice recognition to end a  
3. Highlight the phone number and  
call; you must press  
when the flip is open.  
select Options.  
4. Select Add Voice Dial, Edit Voice Dial, or  
Setting up voice dialing  
To make or receive calls using voice dialing,  
contacts must be saved with associated voice tags.  
Erase Voice Dial.  
5. Follow the prompts.  
Making a call using voice tags  
1. If you haven’t already done so, record a voice  
Creating a voice tag for a contact  
1. Press  
to select Contacts.  
tag for the person you wish to call.  
2. Highlight the contact and press  
.
2. With the flip open, from the home screen,  
3. Press  
down to highlight the number.  
press  
. The phone responds:  
4. Press  
to select Options.  
“Say a name.”  
5. Highlight Add Voice Dial and press  
.
3. Say the name of the person you want to call.  
6. Follow the voice prompts. You will need to say  
4. If the name you said matches a contact in the  
Voice Dial List, the phone responds: “Calling  
(Name).” Remain silent to make the call, or  
say No to cancel.  
the name twice.  
Viewing entries with voice tags  
Select Menu Contacts Voice Dial List.  
Note: If the phone finds multiple voice tags  
that sound like the name you said, you will be  
asked to verify which name you want to call.  
Say Yes when you hear the correct name. Say  
No when you hear an incorrect name.  
A list of all contacts with assigned voice  
tags appears.  
5. When you are finished with the call,  
press  
to end the call.  
44  
Using Voice Recognition  
 
Say “Call” to dial the number.  
Erasing voice tags  
To erase all voice dial recordings in your phone:  
Say “Verify” to cause phone to repeat the  
set of digits that you input.  
1. Menu Settings Voice Features →  
Say “Cancel” to exit voice recognizer and  
return to the home screen.  
Erase Voice Dial.  
2. Select Yes.  
Speak a digit to enter the next digit. Once  
the phone repeats the digit, you can speak  
the next digit or pause to hear the prompt.  
Making a call using digit dialing  
When using digit dialing, you speak digits to dial a  
phone number.  
Using voice features with  
hands-free car kits  
You can use voice commands to make a phone  
call or to answer the phone only if your phone is  
connected to a professionally installed Kyocera  
hands-free car kit (sold separately).  
Note: You cannot speak a string of digits. You  
must speak one digit at a time and wait for  
the prompt.  
1. From the home screen, press  
. The phone  
responds: “Say a name or say Dial.”  
2. Say “Dial”. The phone responds:  
Note: The following features apply only to  
installed hands-free car kits unless noted.  
“Speak a digit.”  
3. Speak the first digit of the phone number you  
want to call. Once the phone repeats the digit,  
you can speak the next digit.  
To shop for hands-free car kits, visit  
800-349-4188 (U.S.A. only) or 858-882-1410.  
If you pause, the phone will prompt you with  
the following five options. After the prompt,  
speak an option.  
Waking up the phone  
If your phone is connected to a Kyocera installed  
hands-free car kit, you can use the voice  
command to activate the phone to make a  
phone call.  
Say “Clear” to erase the last digit entered.  
The phone responds: “Digit cleared.”  
To clear the entire phone number, say  
Clear” again. When the phone prompts  
you with “Clear entire phone number?”,  
say “Yes” to clear or “No” to cancel.  
User Guide for the Kyocera K322 Phone  
 
45  
To activate the Voice Wake-up setting:  
To activate the Voice Answer setting:  
Select Menu Settings →  
Voice Features Voice Wake-Up →  
With accessory.  
Note: The accessory must be attached to use  
this feature.  
1. Select Menu Settings →  
To wake up the phone:  
Voice Features Voice Answer.  
1. Say “Wake Up” and listen for a tone.  
2. Say “Wake Up” again until you hear two tones.  
2. Highlight Enabled and press  
.
3. Select Menu Settings Silent Mode →  
If the phone does not recognize your  
“Wake up” command, see “Training voice  
recognition” on page 47.  
Normal Sounds, then press  
.
To answer a call:  
When you receive an incoming call, the phone  
responds: “Incoming call, answer?” or “Incoming  
roam call, answer?” If the caller is recognized as a  
contact entry in your phone, then the phone will  
say “Incoming call from (Name), answer?”  
Answering the phone  
You can set your hands-free car kit to  
(1) answer automatically or (2) answer using  
a voice command.  
Say “Yes” or press any key except  
.
Answering automatically  
Ignoring an incoming call  
You can set your phone to answer automatically.  
To ignore an incoming call, do one of  
the following:  
Note: This setting also works with the portable  
hands-free car kit.  
Say “No” and press  
to silence the alert.  
Select Menu Settings Accessories →  
Auto-Answer After 5 secs.  
Remain silent. The voice alert repeats twice  
and the phone rings once, then returns to the  
home screen.  
Answering using voice commands  
If Auto-Answer is turned off, you can use a voice  
command to answer an incoming call using the  
installed hands-free car kit.  
Select Menu Settings Accessories →  
Auto-Answer Disabled.  
46  
Using Voice Recognition  
 
Using Expert Mode  
Expert Mode allows you to use voice recognition  
at a faster pace by reducing the number of voice  
instructions and replacing them with tones.  
Simply speak a command after the tone.  
Select Menu Settings Voice Features→  
Expert Mode Expert.  
Training voice recognition  
If your phone is having trouble recognizing your  
voice, you can train it with the commands Yes,  
No, and Wake up.  
1. Select Menu Settings Voice Features.  
2. Select Voice Training.  
3. Read the message and press  
to select OK  
and continue. Cancel returns you to the  
previous screen.  
4. Select Train All or the item you want to train.  
5. Follow the prompts for each word until  
training is complete.  
User Guide for the Kyocera K322 Phone  
 
47  
9
USING THE CAMERA  
3. Press  
to select Settings.  
Tips before operating  
your camera  
4. Highlight an option and press  
:
Flash options are On, Off, or Automatic.  
You cannot activate the camera while  
on an active call or while browsing files in the  
media gallery.  
Resolution options are 1280 x 1024 (best  
for printing), 640 x 480, 320 x 240 (best  
for sending to email), and 160 x 120.  
Low Light Mode brightens the picture for  
low light environments.  
Once the camera is active, the home screen  
acts as the viewfinder.  
If you get a “Low memory” error, check your  
resolution and quality compression settings.  
See “Setting up the camera for photos” on  
this page.  
Self Timer options are Off (default) or 3,  
5, or 10 second pauses. When set, the  
camera beeps from 3 seconds down to the  
time the shutter snaps the picture  
automatically. Self Timer is not available  
when Multishot mode is activated.  
Multishot allows you to take up to six  
multiple pictures while the camera key is  
pressed and held. A tone will play each  
time a picture is taken. A second tone will  
play when the final picture is taken.  
Shutter Sound sets the sound used when  
the camera takes a picture.  
If there is no activity within 45 seconds after  
you turn your camera on, the camera quits  
and returns to the previous launch point.  
Menu settings and options can only be  
accessed when the camera is active.  
Accessing camera mode  
1. Open flip.  
2. Press  
- or -  
White Balance allows the camera to adjust  
for different lighting. Options are  
Automatic, Fluorescent, Incandescent,  
or Daylight.  
select Menu Camera.  
Setting up the camera  
for photos  
1. Select Menu Camera.  
Color Tone sets the color tone of  
the picture.  
2. Press  
to select Options.  
48  
Using the Camera  
 
Quality sets the picture compression. The  
higher the compression, the better the  
detail of the picture (higher pixel rate).  
Options are Low, Medium, or High  
(default). When set to High, the picture  
file size is larger, using more memory.  
LED flashes a light to indicate a picture  
has been taken. Options are On (default)  
and Off.  
Menu options for camera mode  
1. Press  
activate camera mode.  
2. Select Options.  
3. Press up or down to scroll through the  
options on the vertical menu bar:  
or press Menu Camera to  
Settings displays available camera settings  
you may set up prior to taking a picture.  
Brightness allows you to adjust the  
brightness of the image in the home  
screen LCD.  
Viewfinder Display options are Fullscreen  
and Actual.  
Restoring camera menu settings  
Camera Pictures displays all pictures  
taken and stored.  
Last Picture displays the most recently  
taken picture.  
Frames allows you to add a frame or a  
stamp to your picture. A frame or stamp  
cannot be removed once it has been used  
in a picture.  
The following settings revert to the default setting  
each time you enter and exit the camera  
application:  
Low Light Mode, Self Timer,  
MultiShot, Viewfinder.  
The following settings remain at the setting  
you selected each time you enter and exit the  
camera application:  
Note: The picture resolution changes to  
160 x 120 while taking pictures with frames.  
The resolution returns to the original setting  
once Frames is disabled.  
Flash, Resolution, Shutter Sound, White  
Balance, Quality, and LED.  
User Guide for the Kyocera K322 Phone  
 
49  
4. Take the picture using one of two methods:  
Press or  
to select OK or  
when finished taking pictures.  
Camera mode indicators  
and icons  
The camera mode displays the following onscreen  
indicators and icons:  
.
5. Press  
to select Erase.  
6. Press  
Icon  
Description  
Flash on  
Camera key map  
Key  
Camera  
Menu Screen  
Take picture  
Dismiss menu options  
Camera mode  
Select Capture to  
take picture  
Select Options  
Select OK  
Top right corner  
numbers  
Number of  
snapshots remaining  
Cancel, dismisses  
menu  
Scrolls menu options  
right  
Scrolls menu options  
left  
Select menu option  
Zoom level  
Zoom in  
Bottom left  
corner numbers  
Up  
Resolution setting  
Zoom out  
Takes picture  
Down  
Multishot  
Self Timer  
Viewing a saved picture  
1. Select Menu Camera.  
Taking a picture  
1. Open flip.  
2. Press  
to select Options.  
3. Press  
down to select Camera Pictures  
2. Select Menu Camera  
- or -  
and then press  
.
4. Press  
to scroll through the pictures and  
to view it.  
press  
.
press  
3. Focus on the image using the phone’s display  
Press  
for more options:  
as the viewfinder.  
Assign allows you to assign a picture to a  
Contact, assign the picture as Wallpaper,  
or a Screen Saver.  
Tip: Press  
up or down to zoom in or  
zoom out.  
50  
Using the Camera  
 
Modify options are Rotate, Resize,  
Brightness, Sharpness, Saturation, Hue,  
Auto Adjust, Color Tone. Only unlocked  
pictures can be modified.  
Zoom is available by scrolling up (zoom  
in) or down (zoom out) with the scroll  
keys. When zoomed to maximum or  
minimum a tone plays.  
Take Picture allows you to take a picture.  
Lock allows you to lock or unlock a  
picture for editing. If a file is locked, you  
cannot erase, rename, or modify the file.  
Rename allows you to edit the name of a  
picture file.  
Details allows you to view details of  
the picture.  
User Guide for the Kyocera K322 Phone  
 
51  
10 USING MEDIA GALLERY  
The Media Gallery stores camera pictures,  
images, and sounds in the phone and displays  
those files on the phone’s screen.  
Modify press  
to select Options.  
Options are Rotate, Resize, Brightness,  
Sharpness, Saturation, Hue, Auto Adjust,  
Color Tone. Only unlocked pictures can be  
modified.  
Take Picture to snap another photo.  
Lock to prevent accidentally erasing  
the photo.  
Accessing files  
1. Select Menu Media Gallery.  
2. Select an option:  
Camera Pictures displays thumbnails of  
the photos you have taken in  
chronological order.  
Images displays a list of categories that  
contain preloaded, downloaded, saved, or  
created files such as wallpaper, screen  
savers, or caller IDs.  
Rename the photo.  
Details of the file.  
Browsing images  
The images menu allows you to assign your files  
to various applications.  
Sounds displays a list of categories that  
contain saved or downloaded sounds such  
as ringers and voice memos.  
1. Select Menu Media Gallery Images.  
2. Highlight an option and press  
:
Saved Images displays available images.  
Wallpapers displays wallpaper selections.  
Screen Savers displays available  
screensavers.  
Browsing pictures  
1. Select Menu Media Gallery →  
Camera Pictures.  
Caller IDs displays pictures and images  
saved and the text IDs you assigned them.  
Doodles saved from Doodler.  
2. Highlight a picture and press  
to  
select View.  
3. Press  
to select Options:  
3. Press  
to select Options (options vary  
Assign picture as a Caller ID or  
as wallpaper.  
Zoom allows you to zoom in or out on  
the picture.  
according to selection):  
Assign to assign the image to a contact.  
Details gives you the file size of the image.  
52  
Using Media Gallery  
 
Erase All erases all images stored (images  
must not be locked).  
4. Select Close or press  
when done.  
Browsing sounds  
1. Select Menu Media Gallery Sounds.  
2. Highlight an option and press  
:
Saved Sounds contains sounds saved on  
your phone.  
Ringers contains ringers saved on  
your phone.  
Voice Memos contains voice memos you  
made to yourself.  
3. Highlight an option and press  
(options vary according to selection):  
Assign to assign the ringer to a contact.  
Play to review the sound.  
Record New allows you to record  
new sounds.  
Erase the sound.  
Lock to prevent accidentally erasing  
the sound.  
Rename allows you to rename the  
sound file.  
Details gives you the file size of the sound.  
Erase All erases all sounds stored.  
4. Select Close when done.  
User Guide for the Kyocera K322 Phone  
 
53  
11 USING TOOLS AND GAMES  
Naming a saved voice memo  
1. Select Menu Tools & Games →  
Voice Memo  
The Voice Memo tool allows you to record and  
play back audio memos.  
Voice Memo Recorded Memos.  
2. Highlight the memo and select Options.  
Recording a voice memo  
3. Select Rename.  
1. Select Menu Tools & Games →  
Voice Memo Record New.  
- or -  
4. Press and hold  
to clear the  
default name.  
5. Use the keypad to enter a name for the memo.  
Press and hold  
right.  
6. Select Save.  
2. Say your memo and press  
to select Stop.  
3. Select Save to save your memo.  
Erasing a saved voice memo  
1. Select Menu Tools & Games →  
Note: If an incoming call is received while you’re  
recording a memo, the memo is saved and the  
incoming call screen appears.  
Voice Memo Recorded Memos.  
2. Highlight the memo and select Options.  
3. Select Erase. The prompt “Erase file?”  
Playing or reviewing a voice memo  
1. Select Menu Tools & Games →  
appears.  
4. Select Yes or No.  
Voice Memo Recorded Memos.  
2. Highlight the voice memo to review and  
Scheduler  
The Scheduler allows you to schedule events and  
set reminder alerts.  
select Play.  
3. Press  
and press  
right and left to select a function  
to perform it:  
Creating an event  
1. Select Menu Tools & Games →  
Play  
Stop  
Pause  
Scheduler Add New Event.  
2. Enter a name for the event and press  
down. For help entering text, see page 17.  
54  
Using Tools and Games  
 
3. Select Options and classify the type of event  
and press : Meeting, Phone Call,  
9. Press  
to set the reminder sound.  
Select an option and press  
.
Birthday, Anniversary, Vacation, Medical,  
or Other.  
10. Press  
to select a Silent Mode setting  
Select No or During Event and press  
11. Press to select whether or not this is a  
recurring event.  
.
4. Press  
to change the date of the event (the  
current date is the default date of the event).  
Press  
left or right to move between  
Select an option and press  
: No, Daily,  
the month, day, and year fields.  
Weekly, Monthly, or Annually.  
Press  
month, day, or year.  
up or down to change the  
12. Select Save.  
Press  
to save your changes.  
Editing, erasing, or sending an event  
1. Select Menu Tools & Games →  
Scheduler View Month.  
2. Press  
5. Press  
to set the time of the event.  
Press  
left or right to move between  
the hour, minute, and AM/PM fields.  
up, down, left or right to highlight  
the day with the event to view, edit, or erase  
Press  
hour, minute, or AM/PM.  
Press to save your changes.  
up or down to change the  
and press  
3. Press  
and press  
4. Press  
.
up or down to highlight the event  
.
6. Press  
to set the duration of the event.  
to select Options.  
Press left or right to move between  
5. Select Edit, Erase, or Send and press  
.
the hour and minute fields.  
Press up or down to change the  
hour and minute.  
Press to save your changes.  
For more information about editing the  
event, see “Scheduler” on page 54.  
To erase the event, highlight Erase and  
press  
. Press  
to confirm.  
7. Press  
to set the priority of the event.  
For more information about sending the  
event, see “Sending and Receiving Text  
Messages” on page 24.  
Press to select an option: None, High,  
Medium, or Low.  
8. Press  
to set a reminder of the event.  
Select an option and press .  
User Guide for the Kyocera K322 Phone  
 
55  
Setting the QuickAlarm  
1. Select Menu Tools & Games →  
Alarm Clock  
You can set up to four alerts with your phone’s  
three alarm clocks and one quick alarm.  
Alarm Clock.  
2. Highlight QuickAlarm and select Set.  
Note: The alert occurs only if the phone is on.  
3. Select an option and press  
minutes (default), 30 minutes, or 60 minutes.  
A message appears telling you the  
QuickAlarm is On.  
: 5 minutes, 15  
Setting an alarm clock  
1. Select Menu Tools & Games →  
Alarm Clock.  
2. Highlight one of the alarms and select Set.  
4. When the alarm rings, select Off to turn off the  
alarm or Reset to set the QuickAlarm again.  
3. Use the phone keypad to enter numbers and  
to switch between AM and PM.  
Tip Calculator  
The Tip Calculator helps you calculate how much  
tip to include with a bill.  
Press  
hours, minutes, and AM/PM fields.  
Press up or down to change the  
hours, minutes, and AM/PM options.  
4. Press to set the time of the alarm.  
5. Select Options to set the alarm sound.  
6. Highlight an option and press  
7. Select Options to set the recurring time.  
8. Highlight an option and press  
9. Enter a note for the alarm and press  
10. Press to select Save and set the alarm(s).  
left or right to move between  
1. Select Menu Tools & Games →  
Tip Calculator.  
2. Enter the amount of your bill.  
3. Select Next.  
.
4. Select the amount you want to include as a tip  
(10%, 15%, 18%, 20%, Other) and press  
. Your total bill appears, including tip.  
.
.
5. To split the bill, press  
to select Split.  
6. Press to clear the default of 2 guests.  
11. When the alarm rings, select Off to turn off the  
alarm or Snooze to silence the alarm for  
10 minutes.  
7. Enter the number of guests and press  
select Next. The amount each guest pays  
is calculated.  
to  
Note: Opening the flip turns off the alarm.  
8. Select Done.  
56  
Using Tools and Games  
 
Calculator  
Use the calculator for basic  
mathematical equations.  
Timer  
This timer counts down for a specified amount  
of time. It beeps when that amount of time  
has elapsed.  
1. Select Menu Tools & Games Calculator.  
2. Use the keypad to enter numbers.  
1. Select Menu Tools & Games Timer.  
2. Select Set.  
3. Use  
to select mathematical operations:  
Press  
or right.  
to move the cursor left  
Left x (multiply) Up + (add)  
Right  
Down  
- (subtract)  
÷ (divide)  
Press  
up or down to set the hours,  
4. Press  
to calculate the result. Example:  
minutes, and seconds.  
Enter 5, press  
then press  
left to select X, enter 2,  
to obtain the result of 10.  
3. Select Start to begin the countdown.  
Select Stop to pause the countdown.  
Select Reset to clear the timer.  
5. Press  
- or -  
to return to the home screen.  
4. Select Sound to set the alarm sound and  
press  
.
Press  
to clear the screen.  
5. Press  
or  
to silence the alarm.  
Options  
Adds displayed digit to the value  
stored in memory.  
M+  
MR  
MC  
Stopwatch  
1. Select Menu Tools & Games →  
Displays currently stored value on  
screen.  
Stopwatch.  
2. Select Start to begin counting.  
Select Stop to stop counting.  
Clears value currently stored in  
memory.  
Select Reset to clear the counter.  
User Guide for the Kyocera K322 Phone  
 
57  
Games  
Brick Attack  
The games in this section may not be available  
on your phone. Check with your service provider  
for availability.  
The goal of this game is to eliminate bricks  
arranged in levels. You send a moving ball  
upward using a paddle at the bottom of  
the screen.  
If you receive an incoming call alert while you are  
playing a game, the game is paused and exited.  
You can return to play once the call alert ends.  
Games do not remain paused if the phone is  
turned off or loses power.  
1. Select Menu Tools & Games →  
Brick Attack.  
2. Press  
to select Yes at the prompt, “Turn  
off backlight to conserve battery?”  
3. Press  
to select New.  
Gamepad Keymap setting  
If you have purchased a Kyocera Gamepad, this  
setting allows you to modify the gamepad keymap.  
To pause the game, press  
press to Resume.  
To move the paddle, press  
or right.  
To exit the game, highlight Exit and  
, then  
left  
1. Connect the Kyocera Gamepad to the phone.  
2. Select Menu Settings →  
Gamepad Keymap.  
press  
.
Edit allows you to modify the gamepad key  
mappings.  
Race 21  
Reset resets the gamepad to the factory  
This game is a timed variation of Black Jack. Each  
game comprises three 90-second rounds. To  
score points, add cards in each of the four  
columns, trying to reach but not exceed 21 in  
each column during the course of the game.  
default settings.  
Note: To purchase a Gamepad, call 800-349-  
4188 (U.S.A. only), 858-882-1410, or visit  
1. Select Menu Tools & Games Race 21.  
2. Press  
to select Yes at the prompt, “Turn  
off backlight to conserve battery?”  
58  
Using Tools and Games  
 
3. Select New Game. The first card to be placed  
is shown at the top left of the screen. Press a  
key to add a card to the row as follows:  
Scoreboard provides you with the top  
five scores.  
Music plays music with this game. Select  
from Music Always, Sound Effects,  
Instructions, Credits, During Title, or  
No Music.  
Add cards to the first row.  
Add cards to the second row.  
Add cards to the third row.  
7. Press  
to end all games.  
Add cards to the fourth row.  
Doodler  
You can create and save graphics on your phone.  
Shortcut: Press  
left or right to choose  
arrows at the bottom of the screen then press  
to add cards to corresponding rows.  
1. Select Menu Tools & Games Doodler.  
2. Select New Doodle to open the drawing screen  
The cursor is located in the middle of  
the screen.  
Note: Each time you place a card, a new card  
appears for placement.  
4. Continue placing cards until you are satisfied  
3. Select Options to choose the Colors, Tools,  
with your selections.  
Lines, or Shape you want to use.  
You can pause or end the game at any time  
by pressing  
4. Use keys 1–9 or  
to  
.
move the cursor around the  
screen as indicated.  
You lose points each time you exceed 21  
in a column.  
5. When finished, select  
Options Save. The  
image is saved to  
Select Skip to skip one card per round.  
5. Press  
to select  
to get your score  
and advance to the next round.  
Media Gallery.  
To move the cursor away from the drawing:  
6. Select an option and press  
to select it.  
1. Select Options Colors and Tools.  
New Game initiates game play. To pause  
the game, press . From here you can  
choose Resume, New or Quit.  
2. Select  
then Done.  
3. Press a number key to move the cursor.  
Resume Game returns you to the game  
you were last playing.  
User Guide for the Kyocera K322 Phone  
 
59  
To erase part of a drawing:  
Saving a doodle  
1. Select Options Colors and Tools.  
It is a good idea to save the doodle while you are  
working on it. If you receive a call while creating  
an unsaved doodle, it will be lost.  
2. Select  
then Done.  
3. Press a number key to move the eraser.  
Select Options Save. The image will be  
saved in Menu Media Gallery →  
Images Doodles.  
To Navigate: Use the following keys to doodle.  
To:  
Use:  
Select Options  
Resuming a doodle  
To return to another saved doodle:  
Clear screen  
Select Menu Tools & Games →  
Doodler Resume Doodle.  
- or -  
Select MenuMedia Gallery →  
Images Doodles.  
Shortcut to Colors & Tools  
Draw, erase, or move cursor/  
shape UP  
up  
Draw, erase, or move cursor/  
shape DOWN  
down  
left  
Draw, erase, or move cursor/  
shape LEFT  
Draw, erase, or move cursor/  
shape RIGHT  
right  
Return cursor to center  
Previous screen  
60  
Using Tools and Games  
 
12 CONNECTING TO THE INTERNET  
An underline and an arrow indicate that  
Using the Web Browser  
there is more text. Press  
view more text. Press  
the previous screen.  
down to  
to return to  
You can use your phone to browse the Internet if  
you have obtained phone Internet services from  
your service provider and if over-the-air Internet  
access is available in your area.  
To choose a site, highlight it and press  
to select Go.  
Note: You cannot receive incoming calls while  
you are using Web Browser.  
4. When you have finished using the Internet,  
press to exit the Web Browser.  
Launching the Web Browser  
1. Select Menu Web Browser.  
Using the Web menu options  
The following options may appear on your screen:  
A message about airtime fees appears every  
time you start the browser.  
Home returns you to the main Web Browser  
window, or home page.  
For more information about how airtime is  
charged, contact your service provider.  
Mark Site saves the current location as a  
bookmark for easy access.  
2. Press  
to continue.  
Bookmarks displays a list of your saved  
Web sites.  
If this is the first time you have connected to  
the Internet, a message informs you that  
security is not yet enabled for your  
Web Browser.  
Setup gives you options for changing how  
information is displayed.  
Show URL displays the entire URL.  
3. Press  
to select Yes to enable security.  
About Openwave displays information  
When you are connected, a browser home  
page appears. It has a list of bookmarks and  
some Web menu options at the bottom of  
the screen.  
about your Web Browser version.  
Encryption should not be used unless you  
are instructed to do so by your  
service provider.  
A
appears in a secure session.  
User Guide for the Kyocera K322 Phone  
 
61  
UP.Link selects a different browser server.  
You can use this option if you have more  
than one Web Browser account.  
Restart restarts the Web Browser.  
Searching for a Web site  
How you search for a Web site depends on  
your service provider. For more information,  
contact your service provider.  
Going to a bookmarked site  
1. Select Menu Web Browser. If you see a  
message prompt, press  
to continue.  
2. From your Web home page, select  
Bookmarks. A list of bookmarks appears.  
3. Enter the number corresponding to the  
bookmark you want and press  
.
Checking Net alerts  
Alerts received from a Web site are sent to your  
Browser Alerts inbox.  
1. Select Menu Messages Browser Alerts.  
This action launches the browser inbox.  
2. Press  
to accept browser fees.  
3. Select an alert and follow the prompts.  
62  
Connecting to the Internet  
 
13 GETTING HELP  
Puerto Rico:  
Venezuela:  
1-866-664-6443  
0-800-100-2640  
Customer support  
Your service provider’s customer support  
department may be accessible directly from your  
phone when you dial a number, such as *611  
(check with your service provider). They can  
answer questions about your phone, phone bill,  
call coverage area, and specific features available  
to you, such as call forwarding or voicemail. For  
questions about the phone features, refer to the  
materials provided with your phone, or visit  
www.kyocera-wireless.com. For additional  
questions, you may contact the Kyocera Wireless  
Corp. Customer Care Center in any of the  
following ways:  
Before requesting support, please try to  
reproduce and isolate the problem. When you  
contact the Customer Care Center, be ready to  
provide the following information:  
The name of your service provider.  
The actual error message or problem you  
are experiencing.  
The steps you took to reproduce the problem.  
The phone’s electronic serial number (ESN).  
To locate the ESN select Menu →  
Phone Info Build Info and scroll down  
to ESN: for the 11-digit number.  
Phone: 1-800-349-4478 (U.S. and Canada)  
or 1-858-882-1401.  
Customer support phone numbers are also  
available in the following countries:  
Qualified service  
If the problem with your phone persists, return  
the phone with all accessories and packaging to  
the dealer for qualified service.  
Phone accessories  
Argentina:  
Australia:  
Brazil:  
0-800-666-0052  
1-800-507-000  
0-800-55-2362  
To shop for K322 phone accessories, visit  
call us at 800-349-4188 (U.S.A. only) or  
858-882-1410.  
Chile:  
800-43-1212  
Colombia:  
India:  
01-800-700-1546  
Toll free#: 1-600-121214  
Toll#: 0124-284-5000  
001-866-650-5103  
Become a product evaluator  
Mexico:  
To participate in the testing and evaluation of  
Kyocera Wireless Corp. products, including  
cellular or PCS phones,  
New Zealand: 0-800-990-100  
Panama:  
Peru:  
001-800-201-1984  
0-800-51-934  
visit beta.kyocera-wireless.com.  
User Guide for the Kyocera K322 Phone  
 
63  
INDEX  
Numerics  
1-Touch dialing, 13  
creating, 38  
hard pause, 20  
D
I
A
data/fax setup, 14, 42  
digital mode, 8  
icons, 8  
Alarm Clock, 8  
alarm clock, 56  
alerts  
for headsets, 38  
for messages, 38  
for missed calls, 11  
analog mode, 8  
auto-hyphenation, 40  
contacts, 22  
messages, 27  
InBox, 28  
display contrast, 40  
Doodler, 59  
E
K
emergency  
Key descriptions, 3  
calls, 13  
L
emergency mode, 14  
exit emergency mode, 14  
position location, 8, 43  
erasing  
language, 39  
lights  
B
lights-only mode, 8, 36  
banner, 39  
battery, 1  
blocking outgoing calls, 41  
Brick Attack, 58  
limiting calls out, 41  
lock code, 41  
locking  
contact entries, 22, 42  
text messages, 29  
expert mode, 47  
phone, 41  
F
C
M
fast find, 23  
fax mode, 42  
finding contact information, 23  
frequent contacts, 23  
calculator, 57  
call counters, 14  
callback number, 25  
calls  
memory  
saving, 29  
menu view, 39  
N
answering, 9  
G
number mode, 17  
missed, 11  
games  
redialing, 10  
O
Brick Attack, 58  
Doodler, 59  
Race 21, 58  
camera  
OutBox, 27  
menu options, 49  
sending a picture, 49  
setting up, 50  
taking a picture, 50  
color themes, 40  
Com Port speed, 42  
contacts directory, 20  
contrast, 40  
P
phone numbers  
H
verifying your own, 7  
hands-free car kit  
answering using voice, 46  
purchasing, 63  
hands-free headset  
and phone ringer, 38  
jack, 4  
phone, unlocking, 41  
position location, 8, 43  
Q
QuickAlarm, 56  
QuickText, 25, 30  
countdown timer, 57  
custom menu  
purchasing, 63  
64  
 
R
U
Race 21, 58  
recent call icons, 12  
resetting the phone, iv  
ringers  
unlocking the phone, 41  
V
vibrate, 8, 36  
Voice Answer, 46  
voice dialing, 44  
voice memo  
erasing, 54  
naming, 54  
recording, 54  
voicemail, 13  
setting up, 6  
volume  
choosing types, 36  
for contacts, 21  
for roaming calls, 15  
silencing, 6  
volume, 37  
roaming, 8  
alerts, 15  
controlling, 14  
ringer, 15  
earpiece, 9, 37  
key beep, 37  
ringer, 37  
S
scheduler, 54  
screen contrast, 40  
screen icons, 8, 17, 27, 36  
screen savers, 40  
secret contacts, 12, 22  
security, 41  
W
wallpaper, 40  
Web Browser, 61  
sent messages, 27  
silent mode, 8, 36  
smart sound, 37  
smiley mode, 18  
speed dialing, 22  
stopwatch, 57  
symbol mode, 18  
T
technical support, 63  
text entry, 17  
quick reference, 19  
text messages, 24  
time format, 41  
timer, 57  
timing calls, 14  
tip calculator, 56  
TTY/TDD, 43  
User Guide for the Kyocera K322 Phone  
 
65  
 

KTM Motorcycle 450 EXC USA User Manual
Kyocera Cell Phone Dorado Phones User Manual
Lasko Fan 1885 User Manual
Lenovo Network Router 8791 User Manual
Little Wonder Vacuum Cleaner Little Wonder User Manual
Magnadyne Security Camera C SDL User Manual
Makita Brush Cutter 4190D 4190DW User Manual
Makita Nail Gun AN8300 User Manual
McCulloch Lawn Mower M553CM User Manual
Microsoft Photo Scanner 101 User Manual