Fire Brigade Interface
FWI2-1/FWZ2-1
• 2 independent relay outputs
• 9 inputs and 8 outputs for control
tasks
• Connection of country-specific fire
brigade control units
• Line monitoring by means of auxiliary
module
Description
The Fire Brigade Interface FWI2-1 by means of dry The parameters of the nine inputs and eight outputs can
contacts allows for the connection of two independent also be freely set and thus are available for general con-
transmitting devices for the direct interconnection with trol tasks. Optionally, the Fire Brigade Interface Additio-
a designated alarm respondent (e.g., the fire brigade) nal Board (FWZ2-1) can be attached to the Fire Brigade
as well as the connection of a country-specific fire bri- Interface. This unit allows for the connection of two
gade control unit to fire detection control panels Series independent, line-monitored transmitting devices. The
BC216.
surveillance current can be adjusted in three levels.
Building Safety. Building Security.
A
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
FWI2-1_DBL_LST_EN_0804.PDF • PAGE 1
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED
|