OWNER'S MANUAL
MANUAL DE INSTRUCCIONES
DC POWER
VIDEO CASSETTE PLAYER
CD ENERGIA
REPRODUCTOR DE VIDEO
MVP0028
IMPORTANT NOTICE
IMPORTANTE AVISO
TO PREVENT DAMAGE TO THE TAPE, ALWAYS TURN OFF VCP FIRST
BEFORE YOU SWITCH ON OR OFF THE CAR ENGINE IGNITION.
TO PREVENT DAMAGE TO THE TAPE, ALWAYS TURN OFF VCP FIRST
BEFORE YOU SWITCH ON OR OFF THE CAR ENGINE IGNITION.
Tr S1
Before operating the unit, please read this manual thoroughly.
Antes de utilizar su aparato favor de leer las siguientes instrucciones.
4C61501A E/COV-07
1
9/13/01, 2:19 PM
IMPORTANT SAFEGUARDS
1. READ INSTRUCTIONS
All the safety and operating instructions should be read before the unit is operated.
2. RETAIN INSTRUCTIONS
The safety and operating instructions should be retained for future reference.
3. HEED WARNINGS
All warnings on the unit and in the operating instructions should be adhered to.
4. FOLLOW INSTRUCTIONS
All operating and use instructions should be followed.
5. CLEANING
Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use
a damp cloth for cleaning the exterior cabinet only.
6. ATTACHMENTS
The manufacturer of this unit does not make any recommendations for attachments, as they may
cause hazards.
7. WATER AND MOISTURE
Do not use this unit near water. For example, near a bathtub, washbowl, kitchen sink, laundry tub, in a
wet basement, or near a swimming pool.
8. ACCESSORIES
PORTABLE CART WARNING
(symbol provided by RETAC)
Do not place this unit on an unstable cart, stand, tripod,
bracket, or table. The unit may fall, causing serious injury,
and serious damage to the unit.
8A. An appliance and cart combination should be moved with
care. Quick stops, excessive force, and uneven surfaces may
cause the appliance and cart combination to overturn.
9. VENTILATION
S3125A
Slots and openings in the cabinet back or bottom are provided for ventilation, to ensure reliable
operation of the unit and to protect it from overheating. These openings must not be blocked or
covered. The openings should never be blocked by placing the unit on a bed, sofa, rug, or other
similar surface. This unit should never be placed near or over a radiator or heat source. This unit
should not be placed in a built-in installations, such as a bookcase, or rack unless proper ventilation
is provided or the manufacturer's instructions have been adhered to.
10. POWER SOURCE
This unit should be operated only from the type of power source indicated on the rating plate. If you
are not sure of the type of power supply to your home, consult your appliance dealer or local power
company. For units intended to operate from battery power, or other sources, refer to the operating
instructions.
11. GROUNDING OR POLARIZATION
This unit is equipped with a polarized alternating current line plug (a plug having one blade wider
than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are
unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit,
contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the
polarized plug. If your unit is equipped with a 3-wire grounding-type plug, a plug having a third
(grounding) pin, this plug will only fit into a grounding-type power outlet. This too, is a safety feature.
If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the grounding-type plug.
12. POWERCORD PROTECTION
Power-supply cords should be routed so that they are not likely to be walked on or pinched by items
placed upon or against them, paying particular attention to cords at plugs, convenience receptacles,
and the point where they exit from the appliance.
13. LIGHTNING
To protect your unit during a lightning storm, or when it is left unattended and unused for long periods
of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent
damage to the unit due to lightning and power line surges.
3
4C61501A E/COV-07
3
9/13/01, 2:19 PM
IMPORTANT SAFEGUARDS
(CONTINUED)
14. POWER LINES
An outside antenna system should not be located in the vicinity of overhead power lines, or
other electric light or power circuits, or where it can fall into such power lines or circuits. When
installing an outside antenna system, extreme care should be taken to keep from touching
such power lines or circuits as contact with them might be fatal.
15. OVERLOADING
Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.
16. OBJECT AND LIQUID ENTRY
Do not push objects through any openings in this unit as they may touch dangerous voltage
points or short out parts that could result in fire or electric shock. Never spill or spray any type
of liquid into the unit.
17. OUTDOOR ANTENNA GROUNDING
If an outside antenna or cable system is connected to the unit, be sure the antenna or cable
system is grounded to provide some protection against voltage surges and built-up static
charges. Section 810 of the National Electrical Code, ANSI/NFPA 70, provides information
with respect to proper grounding of the mast and supporting structure, grounding of the lead-in
wire to an antenna discharge unit, size of grounding conductors, location of antenna dis-
charge unit, connection to grounding electrodes, and requirements for the grounding electrode.
18. SERVICING
Do not attempt to service this unit yourself as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
19. DAMAGE REQUIRING SERVICE
Unplug this unit from the wall outlet and refer servicing to qualified service personnel under
the following conditions:
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the unit.
c. If the unit has been exposed to rain or water.
d. If the unit does not operate normally by following the operating instructions. Adjust only those
controls that are covered by the operating instructions, as an improper adjustment of other
controls may result in damage and will often require extensive work by a qualified technician
to restore the unit to its normal operation.
e. If the unit has been dropped or the cabinet has been damaged.
f. When the unit exhibits a distinct change in performance, this indicates a need for service.
20. REPLACEMENT PARTS
When replacement parts are required, be sure the service technician uses replacement parts
specified by the manufacturer or those that have the same characteristics as the original
parts. Unauthorized substitutions may result in fire, electric shock or other hazards.
21. SAFETY CHECK
Upon completion of any service or repairs to this unit, ask the service technician to perform
safety checks to determine that the unit is in proper operating condition.
22. WALL OR CEILING MOUNTING
If mounting this unit to a wall or ceiling follow the installation recommended by the manufac-
turer of a mounting bracket specifically designed for this type of product. Use only a mounting
device that can handle the weight and size of your unit. Should your bracket require drilling
holes into this unit, this would void the manufacturers warranty.
23. HEAT
The product should be situated away from heat sources such as radiators, heat registers,
stoves, or other products (including amplifiers) that produce heat.
24. NOTE TO CATV SYSTEM INSTALLER
This reminder is provided to call the CATV system installer's attention to Article 820-40 of the
NEC that provides guidelines for proper grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system of the building, as close to the point of
cable entry as practical.
4
4C61501A E/COV-07
4
9/13/01, 2:19 PM
SAFETY PRECAUTIONS
Congratulations upon your selection of this MEMOREX Product. Be sure to read the
following Safety Precautions before trying to use it for the first time.
MOISTURE CONDENSATION
DO NOT OPERATE THIS VCP FOR AT LEAST TWO OR THREE HOURS WHEN MOIS-
TURE IN THE AIR CONDENSES ON THE VCP.
WHAT IS MOISTURE CONDENSATION?
When a cold liquid is poured into a glass, for example, water vapor in the air will condense on
the surface of the glass. This is called moisture condensation.
MOISTURE WILL CONDENSE ON THE UNIT IN THE FOLLOWING CASES;
When you move this VCP from a cold to a warm place.
After heating a cold room or under extremely humid conditions.
•
•
WHEN YOU EXPERIENCE THE ABOVE CONDITIONS,
The PLAY indicator will flash on and off and all the function buttons except the STOP/EJECT
button are made nonoperational to protect the video heads.
In this case, take out the video cassette, leave the VCP turned on and let it remain at room
temperature until moisture condensation disappears.
Depending on the surrounding conditions, this may take two or three hours.
Head Drum
Video Tape
• If you cause a static discharge when touching the VCP, and the VCP fails to function, simply unplug
the VCP from cigarette lighter socket, wait 10 minutes and plug it back in. The VCP should return to
normal operation.
• Avoid extreme heat or cold. (41˚F/5˚C-104˚F/40˚C)
• Do not place the VCP on or near appliances which may cause electromagnetic interference, e.g.
TV, speakers, etc. Doing so may cause erratic operation of the VCP including picture and/or
sound distortion or noise.
• Do not place any objects (such as coins etc.) on the top of the VCP, which may result in the
serious damage.
• Avoid extreme moisture and dust.
• The ventilation holes prevent overheating. Do not block or cover these holes. Especially avoid
covering the holes with soft materials such as cloth or paper.
• Do not insert fingers or any other objects into the cassette loading slot. Do not spray cleaner or
wax directly on the VCP or use forced air to remove dust.
• Keep the VCP away from flower vases, sinks, etc.
If liquids should be spilled into the VCP, serious damage will result. If you spill any liquids into the
VCP, unplug the DC power cord immediately and consult qualified service personnel before
attempting to use the VCP again.
• When you finish operating the VCP, always unload the cassette and turn off the power.
5
4C61501A E/COV-07
5
9/13/01, 2:19 PM
SAFETY PRECAUTIONS
(CONTINUED)
INSTALL THE VCP IN YOUR CAR
• For a car equipped with air bags, be sure to follow the manufacturer’s instructions whenever
performing any electrical wiring work. Incorrect wiring can cause the air bag system of a car to
malfunction.
•
Never cut the insulation from the power supply lead in an attempt to draw power for another device.
Doing so can overload the current capacity of the lead, creating the danger of fire and
electric shock.
• For proper installation and wiring special technical knowledge is required. If you have any
doubts about where to position or how to install components, contact the retailer where you
purchased the product, your automobile dealership, or an automotive service provider. Note
that you will be charged separately for installation work.
• Use all of the components that come with this product only as directed. Improper use of
components can damage interior components or result in improper anchoring of compo-
nents, which creates the danger of accident and personal injury.
• Improper installation creates the danger of fire and accident.
• Take care so wires are not pinched between chassis parts, by screws, or by the seat as it
slides on its rails, etc. Such conditions can cut wires and cause shorts, creating the danger
of accident, electric shock, and fire.
• Avoid installation in areas subject to strong vibration and areas where secure anchoring
cannot be achieved. Components installed in such areas can work loose, creating the
danger of accident and personal injury.
• Never install the VCP on the dashboard or in any other location where it obstructs forward
vision.
• Never attach the stand to the roof of your car. Doing so creates the danger of the VCP
falling down.
• Never attach the stand to a sharply angled surface or to a surface that causes the VCP to
face downwards. Such installation can cause the VCP to fall.
•
Be sure to turn the ignition key of the car to the “OFF” position before connecting or disconnecting
wires and cables. Failure to do so creates the danger of electric shock and personal injury.
DRIVING SAFETY
• Never watch the VCP or try to adjust settings while driving. Doing so creates the danger of
traffic accident. Before operating the VCP, be sure to stop the car in a safe area.
• Never install the unit on the dashboard or in any other location where it obstructs forward
vision. Items that obstruct forward vision in a motor car may be illegal.
6
4C61501A E/COV-07
6
9/13/01, 2:19 PM
Also, make sure that all components are installed where they do not interfere with operation
of the steering wheel, shift lever, brake pedal, etc., for example under the driver’s seat, and
where they do not endanger passengers. Improper installation creates the danger of traffic
accident and personal injury.
• Make sure all cables are bundled together so they do not interfere with car operation, as
described in this manual. Improperly installed cables create the danger of entanglement with
the steering wheel, shift lever, brake pedal, etc.
IMPORTANT NOTES:
• The unit is designed for use with a 12V DC automotive power supply. Never use it in a
truck, bus, or any other car that has a 24V power supply.
• Be sure to stop your car in a safe area before watching or adjusting the VCP.
• Operating the VCP for a long time with the engine of your car stopped can run down your
car’s battery.
• Never leave the VCP in areas exposed to temperature extremes or strong direct sunlight.
Leaving it in a closed car, in direct sunlight, near a heater, etc. can cause deformation of the
case. Using this product in areas that are colder than 5°C (41°F) or hotter than 40°C
(104°F) can result in poor image quality.
• Never use benzene or other chemical agents for cleaning.
Chemicals can damage the case and remove markings.
Use a soft cloth moistened with a weak solution of water and mild neutral detergent. Wring
out all excess moisture from the cloth before wiping.
• Never drop the VCP or otherwise subject it to strong impact.
• Should the VCP ever begin to emit smoke, abnormal odor, or a strange noise, immediately
turn off power and unplug the unit from the cigarette lighter socket. Continued use of the
VCP under any of these conditions creates the danger of fire and electric shock.
• Do not continue to use the VCP if it is malfunctioning and does not produce a video image
or sound.
Whenever you notice such symptoms, immediately turn off power, unplug the VCP from the
cigarette lighter socket. Continued use of the VCP creates the danger of fire and electric shock.
• When you leave your car unattended for long periods, be sure to unplug the VCP from the
cigarette lighter socket. Leaving the VCP plugged in can run down the car’s battery.
7
4C61501A E/COV-07
7
9/13/01, 2:19 PM
FEATURES
12V DC Operation - This VCP is designed to operate from a 12V DC car cigarette lighter.
2 Speed Picture Search - 3 or 5 times normal speed in SP mode (5 X or 7 X in LP and 7 X or 9 X
in SLP).
Automatic Power On - Playback - Rewind - Stop - Eject - Power Off - When loading the
cassette tape, this unit will automatically turn on and play back the cassette tape at the correct
speed. When the tape reaches the end, it will automatically stop, rewind, stop, eject the tape and
the unit will turn off.
Full Load Tape Transport - Permits rapid access between modes.
Automatic Repeat Play System - When you press the REPEAT button, this unit will automatically
play back the same cassette tape repeatedly.
Digital Auto Tracking - Automatically adjusts tracking during playback for the best possible
picture.
Audio/Video Output Jacks - These jacks permit connection to a VCR or Monitor/TV for better
picture quality or for duplicating video tapes.
This Unit May Be Remote Controlled With The Unified TV/VCP Remote Controller.
This model is designed for Video Cassette playback. Recording is not possible.
*
TABLE OF CONTENTS
PREPARATION
IMPORTANT SAFEGUARDS ......................................................................................................3
SAFETY PRECAUTIONS ............................................................................................................5
FEATURES/TABLE OF CONTENTS .......................................................................................... 8
LOCATION OF CONTROLS ....................................................................................................... 9
CONNECTION TO YOUR TV ....................................................................................................10
POWER SOURCE ..................................................................................................................... 11
SETTING THE VIDEO CHANNEL .............................................................................................12
PLAYBACK
LOADING AND UNLOADING THE VIDEO CASSETTE TAPE..................................................13
PLAYBACK ................................................................................................................................14
SPECIAL EFFECTS...................................................................................................................16
ADDITIONAL INFORMATION
BEFORE REQUESTING SERVICE ...........................................................................................17
VIDEO HEAD CLEANING .........................................................................................................18
SPECIFICATIONS .....................................................................................................................19
8
4C61501A E/P08-15
8
9/13/01, 2:19 PM
LOCATION OF CONTROLS
FRONT
1
PLAY
ATR
REPEAT
POWER
STOP/EJECT
PLAY/STILL
REPEAT
2
3
4
5
6
7
8
9
10 11
12
REAR
13
14
3
4
CH
IN
RF
AUDIO
OUT
VIDEO
OUT
15
OUT
DC (
) 12V
17
16
DESCRIPTIONS OF BUTTONS AND REAR PANEL CONNECTORS
FRONT
1. Cassette Loading Slot - To insert or remove a
10. F.FWD (Fast Forward) button - In the STOP
mode, this button rapidly winds the tape
forward. In the PLAY mode, this button
activates Forward Search.
video tape.
2. STOP/EJECT button - Press once to stop the
tape in any mode. Press again to eject the tape.
11. POWER indicator - This lights when the
power is on. Or will flash on and off to take
up any tape slack at the power recovery
after the power interruption of tape rewind
or forward mode.
3. PLAY indicator - This lights when the PLAY
feature is activated.
When moisture condenses on the VCP, the
PLAY indicator will flash on and off.
4. Remote Sensor - Signals from the Remote
Control are received here.
12. POWER button - Turns the VCP power on
and off.
5. ATR (AUTO TRACKING) indicator - This lights
when the DIGITAL AUTO TRACKING feature is
activated.
REAR
13. 3/4 Channel Selector switch - Selects the
channel through which the VCP outputs its
signal to a TV.
6. REPEAT button - When pressed, the VCP will
play back the tape over and over until stopped
manually.
14. RF IN jack - Connect a VHF/UHF antenna or
CATV cable to this jack.
7. REPEAT indicator - This lights when the
REPEAT feature is activated.
15. RF OUT jack - Used to output VHF/UHF or
CATV signals to a TV.
8. REW (Rewind) button - In the STOP mode,
this button rapidly winds the tape backwards. In
the PLAY mode, this button activates Reverse
Search.
16. AUDIO/VIDEO OUT jacks - Used to output
audio and video signals to a TV, amplifier or VCR.
17. DC Input jack - Connect the 12V DC car cord
(supplied) here for DC operation.
9. PLAY/STILL button - When pressed in the
STOP mode, the tape begins playback.
If pressed during playback, it pauses the tape
and displays a still picture on the TV screen.
9
4C61501A E/P08-15
9
9/13/01, 2:19 PM
CONNECTION TO YOUR TV
Below are 2 common methods of connecting your VCP to a TV.
BASIC CONNECTIONS
The VCP must be connected "between" the antenna, and the TV. First, disconnect the antenna from
the TV and connect it to the VCP. Then connect the VCP to the TV. After you have connected the
antenna to the VCP, you must connect the VCP to the TV.
UHF/VHF
ANTENNA
VCP
TV set
(actual appearance may vary)
3
4
UHF
VHF
300-ohm 75-ohm
CH
IN
RF
VIDEO AUDIO
OUT
OUT
OUT
DC
(
)
12V
75Ω coaxial Cable (Not supplied)
1. Connect the antenna lead to the RF IN terminal of unit.
2. Connect the 75Ω coaxial Cable from the RF OUT terminal of this unit to the RF IN
terminal on the back of your TV.
• When connecting this way, the TV must be tuned to the VCR RF Out Channel.
CONNECTION TO A TV WITH AUDIO/VIDEO JACKS
If your TV has AUDIO IN and VIDEO IN jacks, you can connect your VCP to them to receive
a higher quality picture and sound.
TV set
VCP
TO RF IN
3
4
CH
IN
RF
VIDEO AUDIO
OUT
OUT
OUT
DC
(
)
12V
TO ANT IN
TO VIDEO IN
TO AUDIO IN
TO RF OUT
TO VIDEO OUT
TO AUDIO OUT
AUDIO/VIDEO cord (Not supplied)
1. Connect the VIDEO OUT jack on the VCP to the VIDEO IN jack on the TV.
2. Connect the AUDIO OUT jack on the VCP to the AUDIO IN jack on the TV.
3. Set the VIDEO/TV selector on the TV to "VIDEO"
NOTE: CONNECTION TO A CATV
The VCP must be connected "between" the cable from cable company and the TV.
First, disconnect the cable from the TV and connect it to the VCP. Then connect the
VCP to the TV.
10
4C61501A E/P08-15
10
9/13/01, 2:19 PM
POWER SOURCE
DC POWER SUPPLY
A DC car cord is supplied with the unit.
The car cord has been designed for use with external DC power (12 volt with negative ground).
REAR
TV
3
4
CH
IN
RF
Cigarette
VIDEO AUDIO
OUT
OUT
Lighter Socket
OUT
DC
(
)
12V
12V Negative
Ground DC input
Dual input DC
car adapter
DC IN
(not supplied)
Car Cord
Plug one small plug into the DC input jack on the rear of the VCP, then plug into the one jack of the
Dual input DC car adapter (not supplied) connected to the car cigarette lighter socket. If you use a
TV with DC power, connect to another jack of a dual input DC car adapter.
Make sue that the cord makes a firm connection. It may be necessary to try several insertions,
rotating the plug for proper electrical connection.
NOTE: • ALWAYS TURN OFF VCP FIRST BEFORE SWITCH ON OR OFF THE IGNITION OF
CAR ENGINE.
• Make sure that the negative terminal of the battery is grounded.
This set is designed for use with negative ground system only.
• Use the supplied car cord only.
• When the VCP is not in use, always disconnect it from the car cigarette lighter socket to
avoid a battery drain.
• If the VCP is to be directly connected to a 12V DC power source, for example, recreational
vehicle (RV) applications, make sure the power cord is connected after the ignition switch to
avoid battery drain.
• Do not operate the VCP if the car battery is weak. Peak current from the car alternator
could blow the DC fuse.
• In case of connecting to the TV (Memorex MT1098), refer to its owner’s manual.
• Check the battery’s charge level regularly when the VCP is used in a vehicle.
REPLACING THE FUSE IN THE CAR BATTERY CORD PLUG
If the fuse in the car battery cord plug blows, replace it with a new 8 A fuse (Fast Blow Type) as
shown below. Unscrew the tip of the plug to remove.
PLUG
8A FUSE
TIP
11
4C61501A E/P08-15
11
9/13/01, 2:19 PM
SETTING THE VIDEO CHANNEL
To view playback of a recorded tape, the TV must be set to channel 3 or 4 (video channel).
The VCP 3/4 Channel Selector switch must also be set to channel 3 or 4 as shown below.
If you have used a Audio/Video cable you should not have to follow this procedure. Simply
select the VIDEO mode on your TV.
Press the POWER button to turn the
unit on.
Set the 3/4 Channel selector switch to
CH 3 or 4.
2
1
3
CH
4
3
4
CH
IN
RF
AUDIO
OUT
VIDEO
OUT
OUT
DC (
) 12V
2
Turn ON the TV and set to CH3 or 4 to correspond with the channel selector in 2 .
3
or
3 4
For a push-button TV tuner
If CH 3 or 4, corresponding to the video channel cannot be tuned on your TV, or is not broadcasting in
your area, proceed as follows: set the VCP 3/4 channel selector switch and the TV to CH 3 or 4. Play
back a prerecorded tape and tune the TV to receive a sharp color picture from the video cassette
player. Refer to your TV owner’s manual for details.
12
4C61501A E/P08-15
12
9/13/01, 2:19 PM
LOADINGAND UNLOADING THE VIDEO CASSETTE TAPE
Use only video cassette tapes marked
.
LOADING
Gently push the center of the tape until it is automatically retracted.
AUTOMATIC POWER ON AND PLAY
When loading a cassette tape, this video cassette player will turn on automatically and
playback will start immediately.The POWER, and PLAY indicators will light.
Insert the cassette with its labeled side facing
you. An inverted cassette cannot be inserted.
2
1
UNLOADING
To unload a cassette, press the STOP/
EJECT button in the STOP mode.
Remove the cassette.
1
2
STOP/EJECT
AUTOMATIC EJECT
If the video cassette player automatically
rewinds the tape to the beginning (AUTO
REWIND FEATURE), the tape will be ejected
automatically.
NOTE: • Always eject the tape when not in use.
• The cassette can be ejected even if the POWER button is "OFF".
13
4C61501A E/P08-15
13
9/13/01, 2:19 PM
PLAYBACK
TO START PLAYBACK
Press the POWER button on the unit or
on the remote control to turn the unit on
and set the TV to the Video position.
Load a prerecorded tape. (When loading
a cassette tape, the video cassette player
will turn on, the PLAY indicator will light
and playback will start automatically.)
1
2
POWER
VP POWER
2
1
TO START PLAYBACK AGAIN
TO STOP PLAYBACK
Press the PLAY/STILL button (or the PLAY
button on the Remote Control) once.
Press the STOP/EJECT button (or the STOP
button on the Remote Control) once. The tape
will stop but remain fully loaded and ready to
play. If you are not going to resume play, press
the STOP/EJECT button to eject a tape.
PLAY
PLAY/STILL
STOP
STOP/EJECT
NOTE: To prevent damage to the tape, always turn off VCP first before you switch on or off
the car engine ignition.
14
4C61501A E/P08-15
14
9/13/01, 2:19 PM
TO REWIND OR FORWARD THE TAPE RAPIDLY
Press the REW button in the STOP mode.
Press the F.FWD button in the STOP mode.
F.FWD
REW
If you want to see the tape program during
REW mode, press and hold the REW button.
The backward visual search picture will be
seen on the screen. Release to return to the
REW mode.
If you want to see the tape program during
FWD mode, press and hold the F. FWD
button. The forward visual search picture will
be seen on the screen. Release to return to
the FWD mode.
5
6
0
7
8
QUICK
VIEW
9
CALL
MENU
SET
VOL
CH
RESET SLEEP ENTER
REW
PLAY
F.FWD
STOP
STILL
ATR
REPEAT
TRACKING
VP POWER
DIGITAL TRACKING CONTROLS
When a tape is played, the Digital Auto Tracking System automatically adjusts the tracking to
obtain the best possible picture. The ATR (AUTO TRACKING) indicator blinks while the system
is searching for optimum tracking. The ATR indicator stops blinking and remains lit as long as
automatic tracking continues. If noise bars appear during playback, adjust the tracking
manually;
• Press the TRACKING L or M button to obtain the best possible picture.
To resume automatic tracking, press the ATR button.
ATR
TRACKING
ATR
TRACKING
ATR
15
4C61501A E/P08-15
15
9/13/01, 2:19 PM
SPECIAL EFFECTS
TO VISUALLY SEARCH FOR DESIRED POINTS
When either the F.FWD or REW button is pressed in the PLAYBACK mode, the speed search
picture will appear. When pressed twice, the search picture will increase speed. Speed search time
depends upon the speed used (SP, LP or SLP) during recording. See chart below.
To rewind or fast forward a tape, press the STOP button, and then press the REW or F.FWD button.
To visually search backward, press the REW
button once or twice in the PLAYBACK mode.
To visually search forward, press the F.FWD
button once or twice in the PLAYBACK mode.
F.FWD
REW
Press the PLAY button (or the PLAY/STILL
button on the VCP) once to resume normal
viewing speed.
Press the PLAY button (or the PLAY/STILL
button on the VCP) once to resume normal
viewing speed.
QUICK
VIEW
9
0
CALL
SPEED SEARCH TIMES
MENU
SET
PICTURE SEARCH
SPEED
TAPE SPEED
VOL
CH
RESET SLEEP ENTER
PRESS
ONCE
PRESS
TWICE
REW
PLAY
F.FWD
SP
3 X
5 X
7 X
5 X
7 X
9 X
(Standard Play)
STOP
LP
STILL
ATR
REPEAT
(Long Play)
SLP
TRACKING
(Super Long Play)
VP POWER
TO WATCH A TAPE REPEATEDLY
TO WATCH A STILL PICTURE
Press the STILL button (or the PLAY/STILL
button on the VCP) in the PLAYBACK mode.
Press the REPEAT button (the REPEAT
indicator will light) and the tape will play over
and over until the repeat mode is cancelled.
To cancel repeat mode, press this button
again.
STILL
REPEAT
Press the PLAY button on the Remote Control
or the PLAY/STILL button on the VCP once to
resume normal playback.
NOTE: Best results during speed search playback can be obtained with cassette tapes recorded
•
in the "SLP" mode.
The audio output is muted during SPEED SEARCH and STILL.
•
A few noise bars will appear on the picture during SPEED SEARCH.
•
To prevent damage to the tape, STILL playback is automatically changed to the PLAY-
BACK mode after 5 minutes.
•
16
4C61501A E/P16-19
16
9/13/01, 2:19 PM
BEFORE REQUESTING SERVICE
Check the following chart for the symptom(s) you are experiencing.
SYMPTOMS
POWER
CAUSES
POSSIBLE SOLUTIONS
PAGE
The DC car cord is not
plugged into the cigarette
lighter socket.
Connect the DC car cord to
the cigarette lighter socket.
No power
11
The DC car cord fuse is
blown.
Replace the fuse.
Insert cassette.
11
13
Cassette is not inserted.
Power is on-no
operations
Moisture condenses on the
video heads.
The PLAY indicator is
flashing on and off. Wait two
or three hours until it goes off.
5
PLAYBACK
No picture when playing
back a recorded tape.
The TV is not set to the Video Set the Video channel to 3 or
channel 3 or 4.
4 position on your TV. (When
a TV is connected with an an-
tenna cable)
12
15
Tracking adjustment
beyond range of automatic
tracking circuit.
Adjust tracking manually
using the TRACKING L and
M buttons on remote control.
Noise bars on the screen.
Video heads are dirty.
Clean the video heads.
18
The tape is worn or damaged. Try another tape.
—
FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE, PLEASE VISIT OUR WEBSITE
AT WWW.MEMCORPINC.COM OR CONTACT CUSTOMER SERVICE AT 1-800-919-3647.
PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90 DAYS IN CASE YOU NEED
TO RETURN THIS PRODUCT TO YOUR PLACE OF PURCHASE OR MEMOREX.
FOR PARTS AND ACCESSORIES, CONTACT FOX INT'L AT 1-800-321-6993.
17
4C61501A E/P16-19
17
9/13/01, 2:19 PM
VIDEO HEAD CLEANING
VIDEO HEAD CLOGGING
The video heads are the means by which the VCP reads pictures from the tape during
playback. In the unlikely event that the heads become dirty enough to be clogged, no picture
will be played back. This can easily be determined if, during playback of a known good tape,
there is good sound, but no picture (picture is extremely snowy). If this is the case, have the
video cassette player checked by qualified service personnel.
Good Picture
Snowy Picture
VIDEO HEAD CLEANING
Video head cleaning is needed when the playback picture becomes unclear. This signifies
that the heads are getting dirty and can occur when playing poor quality or damaged tapes.
If the heads require cleaning, use a equivalent high quality chemical non-abrasive (wet) head
cleaning tape or have them cleaned professionally. If playing a head cleaning tape in the VCR
once does not improve the picture, play it several times before requesting service.
DO NOT ATTEMPT TO CLEAN THE VIDEO HEADS OR SERVICE THE UNIT BY REMOV-
ING THE TOP COVER.
NOTE:
Video heads may eventually wear out and should be replaced when they fail to produce
•
clear pictures.
To help prevent video head clogging, use only good quality VHS tapes. Discard worn out tapes.
•
18
4C61501A E/P16-19
18
9/13/01, 2:19 PM
SPECIFICATIONS
Video Head:
Video Signal:
Cassette Tape:
Audio Track:
Video Output:
Audio Output:
Tape Speed:
2 Rotary Heads
NTSC Color
VHS
1 Track
RCA 1Vp-p/75 ohm unbalanced
–
RCA 8dB/1K ohm unbalanced
SP: 33.35 mm/sec
LP: 16.67 mm/sec
SLP:11.12 mm/sec
2' 30" with T120 tape
SP 3 & 5 X Normal Speed
LP 5 & 7 X Normal Speed
SLP 7 & 9 X Normal Speed
12V DC
F.FWD/REW Time:
Speed Search:
Power Sources:
Power Consumption:
Storage Temperature:
Operating Temperature:
Dimensions:
9.8W at DC 12V
–
–
20°C to 60°C ( 4°F to 140°F)
5°C to 40°C (41°F to 104°F)
10 1/16"(W) X 12 3/8"(D) X 3 3/4"(H)
6.6 Ibs (3.0kg)
Weight:
Accessory:
Car battery cord
Specifications are subject to change without notice.
19
4C61501A E/P16-19
19
9/13/01, 2:19 PM
MEMO
4C61501A E/P16-19
20
9/13/01, 2:19 PM
MEMO
4C61501A E/P16-19
21
9/13/01, 2:19 PM
|