LG Electronics 1200 User Manual

User’s Guide

PCS Phone by LG (1200)

Table of Contents

Welcome to Sprint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i

Introduction to this User’s Guide. . . . . . . . . . . . . . . . . . . . . . iii

Section 1: Getting Started. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

1A .S etting Up Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Getting Started With PCS Servic e . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Setting Up Your Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Getting Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Section 2: Understanding Your PCS Phon e . . . . . . . . . . . . . . 7

2A .Y our PCS Phone: The Basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Front View of Phone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Key Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Viewing the Display Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Features of Your PCS Phone by LG^®(1200). . . . . . . . . . . . . . . . . . . . . . . .13

Turning Your Phone ON and OFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Using the Battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Displaying Your Phone Number. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Making and Answering Calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Making Call s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Answering Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Missed Call Notificatio n . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Calling Emergency Number s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Dialing Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

In-Call Option s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

End-of-Call Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Saving a Phone Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Finding a Phone Number. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Dialing and Saving Phone Numbers With Pauses . . . . . . . . . . . . . . . . . .23

Four-Digit Callin g . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 4

Dialing From the Internal Phone Book . . . . . . . . . . . . . . . . . . . . . . . . . .24

Using One-Touch/Two-Touch Speed Dialing . . . . . . . . . . . . . . . . . . . . .25

Entering Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Selecting a Character Input Mod e . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Entering Characters Using T9 Text Input . . . . . . . . . . . . . . . . . . . . . . . .26

Adding a Word to the T9 Database . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

Entering Characters by Tapping the Keypad . . . . . . . . . . . . . . . . . . . . .27

Entering Symbols and Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

2B .C ontrolling Your Phone’s Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Sound Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

Adjusting the Phone’s Volume Settings. . . . . . . . . . . . . . . . . . . . . . . . . .30

Selecting a Key Tone Lengt h . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

Ringer Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

Alert Notification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

Silent Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

Display Setting s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

Changing the Backlight Time Length . . . . . . . . . . . . . . . . . . . . . . . . . . .33

Changing the Greeting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

Changing the Contras t . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34

Changing the Power On/Off and Screen Saver Display Options . . . . . .34

Changing the Display Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

Location Setting s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36

Phone Setup Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36

Call Answer Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36

Auto-Answer Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37

TTY Use With PCS Service From Sprin t . . . . . . . . . . . . . . . . . . . . . . . . . . .37

2C. Setting Your Phone’s Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Accessing the Security Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40

Locking Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40

Unlocking Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40

Changing the Lock Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40

Calling in Lock Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41

Using Special Number s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41

Erasing the Internal Phone Book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41

Resetting Your Phon e . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42

2D .C ontrolling Your Roaming Experience . . . . . . . . . . . . . . . . . . . . . . . . . 43

Understanding Roaming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44

Setting Your Phone’s Roam Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45

Call Guard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46

2E. Navigating Through Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Menu Navigatio n . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48

Menu Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48

Viewing the Menu s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49

2F. Managing Call History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Viewing Call History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52

Call History Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52

Making a Call From Call History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53

Saving a Phone Number From Call History . . . . . . . . . . . . . . . . . . . . . . . .54

Prepending a Phone Number From Call History . . . . . . . . . . . . . . . . . . . .55

Erasing Call Histor y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55

2G .U sing the Internal Phone Book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Displaying an Internal Phone Book Entry . . . . . . . . . . . . . . . . . . . . . . . . .58

Internal Phone Book Entry Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59

Adding a New Internal Phone Book Entry . . . . . . . . . . . . . . . . . . . . . . . . .60

Adding a Phone Number to an Internal Phone Book Entr y . . . . . . . . . . . .60

Editing an Internal Phone Book Entry’s Phone Number . . . . . . . . . . . . . .61

Editing an Internal Phone Book Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . .62

Selecting a Ringer Type for an Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62

Secret Internal Phone Book Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63

Managing Speed Dial Setting s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64

Dialing PCS Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64

2H .U sing the Scheduler, Calculator, and Games . . . . . . . . . . . . . . . . . . . 65

Using the Scheduler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66

Adding an Event to the Schedule r . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66

Event Alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67

Event Alert Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67

Viewing Events and Event Option s . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67

Editing an Event’s Title . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68

Editing an Event’s Setting s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69

Erasing a Day’s Events . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70

Going to Today’s Scheduler Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71

Displaying the Week or Month View . . . . . . . . . . . . . . . . . . . . . . . . . . .71

Purging Events . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71

Purging All Events . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71

Viewing Scheduler Memory Space . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72

Viewing Scheduler Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72

Using the Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72

Playing Game s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73

Section 3: Using PCS Service Features . . . . . . . . . . . . . . . . 75

3A .P CS Service Features: The Basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Messaging Basic s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78

Knowing When You Have Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . .78

Message Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78

Using Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79

Setting Up Your Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79

Voicemail Notificatio n . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79

New Voicemail Message Alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80

Retrieving Your Voicemail Messages . . . . . . . . . . . . . . . . . . . . . . . . . . .80

Voicemail Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82

Clearing the Message Icon. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84

Voicemail Menu Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85

PCS Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86

Signing Up for Updates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86

Message Notification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87

Receiving New Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87

Viewing Saved Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87

Storing Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87

Message Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88

Extracting Phone Numbers From a Message. . . . . . . . . . . . . . . . . . . . . .88

Prepending a Phone Number From a Messag e . . . . . . . . . . . . . . . . . . . .89

Extracting Email Addresses From a Message. . . . . . . . . . . . . . . . . . . . . .89

Creating Folders for Message s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90

Editing Message Folders. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90

Erasing All PCS Message s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 1

Using Caller ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91

Responding to Call Waiting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91

Making a Three-Way Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .92

Using Call Forwarding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .93

3B.PCS Voice Command^SM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95

Getting Started With PCS Voice Command . . . . . . . . . . . . . . . . . . . . . . . .96

Creating Your Own Address Book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96

Making a Call With PCS Voice Command . . . . . . . . . . . . . . . . . . . . . . . . .97

Accessing Information Using PCS Voice Command . . . . . . . . . . . . . . . . .97

Section 4: Safety Guidelines and Warranty Information . 99

4A .S afety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101

Getting the Most Out of Your Receptio n . . . . . . . . . . . . . . . . . . . . . . . . .102

Maintaining Safe Use of and Access to Your Phone. . . . . . . . . . . . . . . . .103

Caring for the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106

Acknowledging Special Precautions and the FCC Notice . . . . . . . . . . . .107

Owner’s Record . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109

User Guide Proprietary Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109

4B .M anufacturer’s Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111

Manufacturer’s Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117

Welcome to Sprint

print built the largest all-digital, all-PCS nationwide network

S_{with advanced multimedia services, reaching more than}

230 million people for clarity you can see and hear. We built

our network to give you what we believe you really want from a

wireless phone, clear sound, private conversations, and

time-saving features.

But with Sprint, you can do something even more far-reaching –

simplify your life. Our advanced technology is designed to grow

with your communications needs so that one day you'll be able to

rely entirely on your PCS Phone to stay connected.

This guide will familiarize you with our technology and your new

PCS Phone through simple, easy-to-follow instructions. If you have

already reviewed the Start Here Guide, which was packaged with

your new phone, then you're ready to explore the advanced

features outlined in this guide.

If you have not read your Start Here Guide, go to Section One -

Getting Started. This section provides all the information you need

to quickly activate your phone, set up your voicemail, and much

more. It also contains information on how to contact Sprint should

you have questions about service, wish to check your account

balance, or want to purchase additional products or services.

Thank you for choosing Sprint.

Introduction to this User’s Guide

his User’s Guide introduces you to PCS Service and all the

_{features of your new phone. It’s divided into four sections:}

ᮣ

Section 1: Getting Started

Section 2: Understanding Your Phone

Section 3: Using PCS Service Features

Section 4: Safety and Warranty Information

Throughout the guide, you'll find tips that highlight special

shortcuts and timely reminders to help you make the most of your

new phone and service. The Table of Contents and Index will help

you locate specific information quickly.

You'll get the most out of your phone if you read each section.

However, if you'd like to get right to a specific feature, simply turn

to that page. Follow the instructions in that section and you'll be

ready to use your phone in no time.

Tip: You can print this guide to keep on hand or view it online. If you're

viewing it online, simply click on a topic in the Table of Contents or Index

on any page reference within a section. The PDF will automatically display

the appropriate page.

iii

Section 1

Getting Started

Section 1A

Setting Up Service

In This Section

ᮣ

Getting Started With PCS Service

Setting Up Voicemail

Getting Help

his section walks you through setting up service for your

_{PCS Phone, unlocking your phone, setting up your voicemail,}

and how to contact Sprint for assistance with your PCS Service.

Section 1: Getting Started

1A: Setting Up Service

Getting Started With PCS Service

Determine If Your Phone Is Already Activated

If you received your phone in the mail or purchased it at a

Sprint Store, it probably has been activated. All you need to do

is unlock your phone.

If your phone is not activated, please refer to the Start Here

Guide included with your phone.

Unlocking Your Phone

Follow these steps to unlock your phone:

1. Press and hold

to turn the phone on.

2. Highlight Unlock and press

3. Enter your four-digit lock code. For security purposes, the

code is not visible as you type.

Tip: If you can’t recall your lock code, try using the last four digits of either

your Social Security number or PCS Phone Number or try 0000. If none of

these work, call PCS Customer Service Solutions at 1-888-211-4PCS (4727).

Activating Your Phone

To activate your phone, follow the directions in the Start Here

Guide included with your phone.

Section 1: Getting Started

1A: Setting Up Service

Setting Up Your Voicemail

All unanswered calls to your PCS Phone are automatically

transferred to voicemail, even if your phone is in use or turned

off. Therefore, you will want to set up your voicemail and

personal greeting as soon as your PCS Phone is activated.

To set up voicemail:

1. Press and hold

2. Follow the system prompts to create your pass code, record

your greeting, record your name announcement, and choose

whether to activate One-Touch Message Access (a feature that

lets you access messages simply by pressing and holding

bypassing the need for you to enter your pass code).

Note: The voicemail setup process may vary in certain Affilitate areas.

For more information about using your voicemail, see

“Using Voicemail” on page 79.

Getting Help

Visit Our Web Site

Stop by www.sprintpcs.com and log on to get up-to-date

information on PCS Services, options and more.

You can also:

ᮣ

Review coverage maps

Learn how to use voicemail

Access your account information

Purchase accessories

Add additional options to your service plan

Check out frequently asked questions

And more

Section 1: Getting Started

1A: Setting Up Service

Reaching PCS Customer Service Solutions

You can reach PCS Customer Service Solutions by:

ᮣ

Dialing

on your PCS Phone

Logging on to your account at www.sprintpcs.com

Calling us toll-free at 1-888-211-4727 (Consumer customers),

1-877-CLEARPY (253-2779) (Clear Pay customers), or

1-888-788-4727 (Business customers)

ᮣ

Writing to us at PCS Customer Solutions, P.O. Box 8077,

London, KY 40742

Receiving Automated Invoicing Information

For your convenience, your phone gives you access to invoicing

information on your PCS Account. This information includes

balance due, payment received, invoicing cycle, and the amount

of minutes and/or data used since your last invoicing cycle.

(Airtime charges will apply.)

ᮣ

Press

Note: This service may not be available in all Affiliate markets.

PCS Directory Assistance

PCS Directory Assistance provides a variety of services,

including residential, business, and government listings;

assistance with local or long-distance calls; movie listings; hotel,

restaurant, shopping, and major local event information. There

is a per-call charge and you will be billed for airtime.

ᮣ

Press

PCS Operator Services

PCS Operator Services can provide assistance in placing collect

calls or calls billed to a local telephone calling card or third party.

ᮣ

Press

For more information or to see the latest in products and

services, visit us online at www.sprintpcs.com.

Note: PCS Operator Services may not be available in all

Affiliate markets.

Section 1: Getting Started

1A: Setting Up Service

Section 2

Understanding Your

PCS Phone

Section 2A

Your PCS Phone: The Basics

In This Section

ᮣ

Front View of Phone

Viewing the Display Screen

Features of Your Phone

Turning Your Phone On and Off

Using the Battery and Charger

Displaying Your Phone Number

Making and Answering Calls

our PCS Phone is packed with features that simplify your life

_{and expand your ability to stay connected to the people and}

information that are important to you. This section will guide you

through the basic functions and calling features of your phone.

Section 2: Understanding Your PCS Phone

2A: Your PCS Phone - The Basics

Front View of Phone

1. Display Screen

2. Headset Jack

6. Power On

Indicator/LED

7. Navigation Key

8. End (Power)

3. Volume

Button

4. OK

9. Back

10. Microphone

5. AC Adapter

Jack

Section 2: Understanding Your PCS Phone

10 2A: Your PCS Phone - The Basics

Key Functions

1. Display Screen: Displays phone status icons and

menu items.

2. Headset Jack: Provides connection for an optional headset.

3. Volume Button: Adjust the ringer volume during standby mode

or voice volume during a call.

4. OK: Lets you place or answer a call, select highlighted menu

items, and confirm actions.

5. AC Adapter Jack: Provides connection for the AC adapter

charger

6. Power On Indicator/LED: Flashes when phone is powering up.

Also flashes to alert you to incoming calls, messages, and

scheduler alarms.

7. Navigation Key: Scrolls through menus and displays the next

or previous menu option. Also acts as a shortcut key for

your internal phone book (left) and voicemail box (right).

8. End (Power): Lets you power the phone on or off, end calls,

or return to standby mode from any screen.

9. Back (Clear): Lets you clear an entry or back up within

a menu.

10. Microphone: May be muted for privacy during a call.

Section 2: Understanding Your PCS Phone

2A: Your PCS Phone - The Basics 11

Viewing the Display Screen

This list identifies the symbols you’ll see on your display screen.

ᮣ

shows your current signal strength.

The more lines you have, the stronger your signal.

ᮣ

means your phone cannot find a signal.

tells you a call is in progress.

indicates you are “roaming” off the enhanced

Sprint Nationwide PCS Network.

ᮣ

indicates your phone is in vibrate mode.

indicates you have new text messages.

indicates you have voicemail messages. Press and

hold to call your voicemail box.

ᮣ

indicates you have new text and voice messages.

indicates your phone’s location feature is enabled. When

Location is “Off,”

appears on the display screen.

ᮣ

indicates your phone is operating in TTY mode. (For

information on your phone’s TTY capability, see page 37.

shows your current battery charge strength.

(Icon is shown fully charged.)

Tip: Display indicators let you know when you’re off the enhanced

Sprint Nationwide PCS Network.

Section 2: Understanding Your PCS Phone

12 2A: Your PCS Phone - The Basics

Features of Your PCS Phone by LG (1200)

Congratulations on the purchase of your PCS Phone by

LG (1200). This phone is lightweight, easy-to-use, and reliable.

It also offers many significant features and service options:

ᮣ

Single-band capability provides access to other digital

networks where Sprint has implemented roaming

agreements (page 43).

ᮣ

PCS Voice Command^SMlets you dial phone numbers by

speaking someone’s name or the digits in their phone

number (page 95).

ᮣ

PCS Messaging lets you receive email messages and updates

on your phone (page 86).

The built-in scheduler lets you schedule alerts to remind

you of important events (page 65).

One hundred ninety-nine internal phone book entries store

up to five phone numbers each (page 57).

T9^®Text input lets you quickly enter text by using one key

press per letter (page 26).

Speed dialing lets you dial phone numbers by pressing one

or two digits (page 25).

ᮣ

Built-in games offer an entertaining diversion (page 73).

More than a dozen preprogrammed ringers let you

personalize your phone (page 31).

Section 2: Understanding Your PCS Phone

2A: Your PCS Phone - The Basics 13

Turning Your Phone ON and OFF

Turning Your Phone ON

To turn your phone on, press

two seconds.

for approximately

Once your phone is ON, it displays “Searching for Service”

which indicates that your phone is searching for a signal. When

your phone finds a signal, it automatically enters standby mode –

the phone’s idle state. At this point, you are ready to begin

making and receiving calls.

If your phone is unable to find a signal after 15 minutes of

searching, a Power Save feature is automatically activated.

When a signal is found, your phone automatically returns to

standby mode.

In Power Save mode, your phone searches for a signal

periodically without your intervention. You can also initiate a

search for PCS Service by pressing any key (when your phone is

turned ON).

Tip: The Power Save feature helps to conserve your battery power when

you are in an area where there is no signal.

Turning Your Phone OFF

Press and hold

until you see the powering down

message and animation (for example, “LG Goodbye!”) on the

display screen.

Your screen remains blank while your phone is off (unless the

battery is charging).

Section 2: Understanding Your PCS Phone

14 2A: Your PCS Phone - The Basics

Using the Battery

Battery Capacity

Your PCS Phone is equipped with a Lithium Ion (LiIon) battery.

It allows you to recharge your battery before it is fully drained.

The battery provides approximately [xx] hours of continuous

digital talk time (xx hours in analog) or approximately [xx]

hours of continuous digital standby time ([xx] hours in analog).

When the battery reaches [xx]% of its capacity, the battery icon

blinks. When there are approximately two minutes of talk time

left, the phone sounds an audible alert and then powers down.

Note: Long backlight settings, searching for service, vibrate mode and

browser use affect the battery’s talk and standby times.

Tip: Be sure to watch your phone’s battery level indicator and charge the

battery before it runs out of power.

Installing the Battery

Your PCS Phone comes with a LiIon battery. Follow these steps

to install it:

1. Place the battery in the opening at the back of the phone at

a 45-degree angle with the metal contacts at the bottom,

facing downward.

2. Gently press down on the battery until the latch snaps

into place.

Removing the Battery

To remove your battery, follow these easy steps:

1. Make sure the power is off so that you don’t lose any stored

numbers or messages.

2. Push up on the battery release latch on the back of

the phone.

3. Remove the battery from the phone at a 45-degree angle.

Section 2: Understanding Your PCS Phone

2A: Your PCS Phone - The Basics 15

Charging the Battery

Your PCS Phone comes with a rechargeable battery. You should

charge the battery as soon as possible so you can begin using

your phone.

Keeping track of your battery’s charge is important. If your

battery level becomes too low, your phone automatically turns

off and you will lose all the information you were just working

on. For a quick check of your phone’s battery level, glance at

the battery charge indicator located in the upper-right corner of

your phone’s display screen. If the battery charge is getting too

low, the battery icon (

warning tone.

) blinks and the phone sounds a

Always use a Sprint-approved AC adapter charger or vehicle

power adapter to charge your battery.

Warning! Using the wrong battery charger could cause damage to your

phone and void the warranty.

Using the AC Adapter Charger

To use the AC adapter charger provided with your phone:

1. Plug the AC adapter into an electrical outlet.

2. Insert the round end of the adapter into the AC adapter

jack at the bottom of the phone. (Make sure the battery

is installed.)

ᮣ

A beep lets you know the adapter is attached to the phone.

As the phone charges, the battery icon continually displays

ᮣ

a progression from empty (

charging is complete, the battery full icon (

) to full (

). When

) will blink.

It takes approximately two hours to fully recharge a completely

rundown battery. With the Sprint-approved LiIon battery,

you can recharge the battery before it becomes completely

run down.

Section 2: Understanding Your PCS Phone

16 2A: Your PCS Phone - The Basics

Displaying Your Phone Number

Just in case you forget your phone number, your PCS Phone can

remind you.

To display your phone number:

1. Highlight Phone Book and press

2. Highlight My Phone # and press

You can also display your phone number by highlighting

Phone Info. and pressing

Making and Answering Calls

Making Calls

Your PCS Phone offers many different ways to make calls,

including PCS Voice Command^SM(page 95), Speed Dialing

(page 25) and using Call Histor y (page 53).

To make a call using your keypad:

1. Make sure your phone is on.

2. Enter a phone number. (If you make a mistake while dialing,

press

to erase one digit at a time. Press and hold

erase the entire number.)

3. Press . (To make calls when you are roaming and

Call Guard is enabled, highlight Roam Call and press

See “Call Guard” on page 46.)

4. When you’re finished, press

or close the phone.

Tip: To redial your last outgoing call, press and hold

Tip: When making calls off the enhanced Sprint Nationwide PCS Network,

always dial using 11 digits (1 + area code + phone number).

Section 2: Understanding Your PCS Phone

2A: Your PCS Phone - The Basics 17

Answering Calls

1. Make sure your phone is on. If your phone is off, incoming

calls go to voicemail.

2. When a call comes in, answer the call by opening the phone

or by highlighting Answer and pressing

. Depending on

your settings, your PCS Phone notifies you of incoming calls

in the following ways:

ᮣ

The phone rings or vibrates.

The LED flashes.

The backlight illuminates.

The screen displays an incoming call message.

If available, the phone number of the caller is displayed.

If the phone number is in your Internal Phone Book, the

Phone Book entry’s name is displayed.

The following options are also displayed. To select an option,

highlight it and press

ᮣ

Silence Ringer to mute the ringer.

Ignore to send the call to your voicemail box.

ᮣ

Depending on your settings, you may also answer incoming calls

by pressing any digit. (To answer a call when you are roaming

and Call Guard is enabled, you will be prompted to select Answer

to answer the call. See “Call Guard” on page 46.)

Note: If your phone is off, incoming calls go to voicemail.

3. To disconnect the call, close the phone or press

Missed Call Notification

When an incoming call is not answered, the Missed Call log is

displayed on your screen.

To display the Missed Call entry:

ᮣ

Highlight the entry and press

number, highlight Call and press

. (To dial the phone

Section 2: Understanding Your PCS Phone

18 2A: Your PCS Phone - The Basics

Calling Emergency Numbers

Your can place calls to 911 (dial

and press

even if your phone is locked or your account is restricted.

Dialing Options

Dialing options are displayed when you enter numbers in the

phone’s standby mode.

To initiate an action, highlight it and press

[An Internal Phone Book Entry] to display the listing

contained in the speed dial location you entered (if

ᮣ

applicable). Highlight Call and press

to dial the

speed dial number.

Tip: To speed dial a phone number from standby mode, press and hold the

speed dial number. If the speed dial number is two digits, enter the first

digit, then press and hold the second digit. (This feature will not work when

you are roaming and Call Guard is enabled.) (For information on assigning

speed dial numbers, see “Editing an Internal Phone Book Entry’s Phone

Number” on page 62.)

ᮣ

Call to dial the phone number. (If you are roaming and have

Call Guard activated, highlight Roam Call and press

See “Call Guard” on page 46.)

ᮣ

Save to save the phone number in your Internal Phone Book.

(See “Saving a Phone Number” on page 22.)

Find to display Internal Phone Book entries that contain

the entered numbers. (See “Finding a Phone Number” on

page 23.)

ᮣ

Hard Pause to insert a hard pause. (See “Dialing and Saving

Phone Numbers With Pauses” on page 23.)

2-Second Pause to insert a 2-second pause. (See “Dialing and

Saving Phone Numbers With Pauses” on page 23.)

4-Digit Call to dial the phone number in your Internal Phone

Book that ends with the four digits you enter. (See “4-Digit

Calling” on page 24.)

ᮣ

Exit to return to the main menu.

Section 2: Understanding Your PCS Phone

2A: Your PCS Phone - The Basics 19

In-Call Options

During a call, your phone displays menu options in addition to

the main menu.

To select an option, highlight it and press

ᮣ

Flash to answer an incoming call using Call Waiting or

connect a third party during Three-Way Calling (if

applicable). (See “Responding to Call Waiting” on page 91.)

ᮣ

End Call to end the call.

Mute or Unmute

Select Mute to mute your phone’s microphone. Select

Unmute to reactivate the microphone.

ᮣ

Dial 3-Way Call to call a third party.

(See “Making a Three-Way Call” on page 92.)

Call History to display the Call History menu.

(See “Managing Call History” on page 51.)

Messages to display the Messages menu.

(See “Messaging Basics” on page 78.)

Phone Book to display the Internal Phone Book menu.

(See “Using the Internal Phone Book” on page 57.)

Display to change your phone’s display settings.

(See “Display Settings” on page 33.)

ᮣ

Phone Info. to display your phone’s information screen.

Calculator to display your phone’s calculator.

(See “Using the Calculator” on page 72.)

Section 2: Understanding Your PCS Phone

20 2A: Your PCS Phone - The Basics

End-of-Call Options

After receiving a call from or making a call to a phone number

that is not in your Internal Phone Book, the phone number,

the duration of the call, and the following menu options

are displayed.

To select an option, highlight it and press

ᮣ

OK to return to the main menu. (You can also press

Call to dial the phone number.

Save to save the phone number in your Internal Phone

Book. (See “Saving a Phone Number” on page 22.)

After receiving a call from or making a call to a phone number

that is already in your Internal Phone Book, the Phone Book

entry name and phone number, the duration of the call, and the

following menu options are displayed.

To select an option, highlight it and press

ᮣ

OK to return to the main menu. (You can also press

Call to dial the phone number.

ᮣ

Note: The End-of-Call options are not displayed for calls identified as

No ID or Restricted.

Section 2: Understanding Your PCS Phone

2A: Your PCS Phone - The Basics 21

Saving a Phone Number

Your PCS Phone can store up to five phone numbers in

each of 99 Internal Phone Book entries. Each entry’s name

can contain 16 characters. Your phone automatically sorts the

Internal Phone Book entries alphabetically.

To save a number from standby mode:

1. Enter a phone number.

2. Highlight Save and press

3. Highlight a label and press

Note: A phone number labeled Fax can only be dialed through a

personal computer.

4. Enter a name for the entry or select an existing entry and

press

. (See “Entering Text” on page 25.)

5. To select an option, highlight it and press

ᮣ

Done to save the entry.

Set Speed Dial to assign a speed dial location for the

number. Highlight or enter the desired speed dial number

and press

. (See “Using One-Touch/Two-Touch Speed

Dialing” on page 25.)

After saving the number, the number’s Internal Phone Book

entry is displayed. (See “Internal Phone Book Entry Options” on

page 59.)

Section 2: Understanding Your PCS Phone

22 2A: Your PCS Phone - The Basics

Finding a Phone Number

You can search Internal Phone Book entries for phone numbers

that contain a specific string of numbers.

To find a phone number:

1. Enter one or more digits. The more numbers you enter, the

more specific the search becomes.

2. Highlight Search and press

3. To display the Internal Phone Book entry that contains the

phone number, highlight the entry and press . To dial

the number, press again.

Dialing and Saving Phone Numbers With Pauses

You can dial or save phone numbers with pauses for use with

automated systems, such as voicemail or credit card billing

numbers. If you select a hard pause, the next set of numbers are

sent when you highlight Send Tones and press

. If you select

a 2-second pause, your phone automatically sends the next set

of numbers after two seconds.

Note: You can have multiple pauses in a phone number and combine

2-second and hard pauses.

To dial or save phone numbers with pauses:

1. Enter the phone number.

2. Highlight either Hard Pause or 2-Second Pause and press

. Hard pauses are displayed as a “P” and 2-second

pauses as a “T”.

3. Enter additional numbers.

4. Highlight Call to dial the number or Save to save the number

in your Internal Phone Book and press

When dialing a number with a hard pause, highlight Send Tones

and press

to send the next set of numbers.

Section 2: Understanding Your PCS Phone

2A: Your PCS Phone - The Basics 23

Four-Digit Calling

Enter four digits from standby mode to display the 4-Digit Calling

option. If you select 4-Digit Call your phone displays the entry in

your Internal Phone Book that contains the four digits you entered.

To use 4-Digit Calling:

1. Dial the last four digits of an Internal Phone Book entry’s

phone number.

2. Highlight 4-Digit Call and press

3. The matching Internal Phone Book entry/entries will display.

Highlight the correct entry and press

Dialing From the Internal Phone Book

To dial directly from an Internal Phone Book entry:

1. Highlight Phone Book and press

2. Highlight Find Name and press

Shortcut: Press the navigation key left to list entries.

3. Scroll or enter the first letters of the entry’s name to

highlight the entry you want to call and press

to display

the Internal Phone Book entry.

4. Press

to dial the entry’s default number. To dial another

number from the entry, highlight it and press

twice.

Section 2: Understanding Your PCS Phone

24 2A: Your PCS Phone - The Basics

Using One-Touch/Two-Touch Speed Dialing

With this feature, you can dial Speed Dial entries using one key

press for locations 1-9 or two key presses for locations 10-99.

To use One-Touch Dialing for Speed Dial locations 1-9:

ᮣ

Press and hold the appropriate key for approximately two

seconds. The display confirms that the number has been

dialed when it shows “Calling...”.

To use Two-Touch Dialing for Speed Dial locations 10-99:

1. Press the first digit.

2. Press and hold the second digit for approximately two

seconds. The display confirms that the number has been

dialed when it shows “Calling...”.

Note: Speed dialing is not available when you are roaming with

Call Guard enabled.

Entering Text

Selecting a Character Input Mode

Your PCS Phone provides convenient ways to enter words,

letters, punctuation, and numbers whenever you are prompted

to enter text (for example, when adding an Internal Phone

Book entry).

To change the character input mode:

1. When you display a screen where you can enter text, enter

one character, highlight Mode and press

2. To select a character input mode, highlight it and

press

ᮣ

T9Word to enter characters using T9 Text Input

(see page 26).

ᮣ

Abc to enter characters by tapping the keypad

(see page 27).

ᮣ

SYM to enter symbols (see page 27).

123 to enter numbers (see page 27).

Section 2: Understanding Your PCS Phone

2A: Your PCS Phone - The Basics 25

Entering Characters Using T9 Text Input

T9 Text Input lets you enter text in your PCS Phone by pressing

keys just once per letter. (To select the T9 Word mode when

entering text, see "Selecting a Character Input Mode" on

page 25.)

T9 Text Input analyzes the letters you enter using an intuitive

word database and creates a suitable word. (The word may

change as you type.) If the word you want does not display after

you have entered all the letters, press

additional word selections. To accept a word and insert a space,

press

to scroll through

If you make a mistake, press

to erase a single character.

Press and hold to delete an entire entry.

Adding a Word to the T9 Database

If a word you want to enter does not display as an option when

you are using T9 Text Input, you can add it to the database.

To add a word to the T9 Text Input database:

1. Select the Abc character input mode. (See “Selecting a

Character Input Mode” on page 25.)

2. Enter the word using multi-tap text entry. (See “Entering

Characters by Tapping the Keypad” on page 27.) The word

will appear as an option the next time you scroll through

options during T9 Text Input.

For more information about T9 Text Input, visit the Tegic Web

site at www.T9.com.

Section 2: Understanding Your PCS Phone

26 2A: Your PCS Phone - The Basics

Entering Characters by Tapping the Keypad

To enter characters by tapping the keypad, select the Abc mode

(see “Selecting a Character Input Mode” on page 25). Press the

corresponding key until the desired character appears. By

default, the first letter of an entry is capitalized and following

letters are lowercase.

Characters scroll in the following order:

ᮣ

. , - ? ! ’ @ : 1

A B C 2

D E F 3

G H I 4

J K L 5

M N O 6

P Q R S 7

T U V 8

W X Y Z 9

Space

Shift

After a character is entered, the cursor automatically advances

to the next space after two seconds or when you enter a

character not on the same key.

Entering Symbols and Numbers

To enter symbols, select SYM mode. (See “Selecting a Character

Input Mode” on page 25.) To enter a symbol, press the

appropriate key indicated on the display.

To enter numbers, select the 123 mode and press the

corresponding number key. (See “Selecting a Character Input

Mode” on page 25).

Section 2: Understanding Your PCS Phone

2A: Your PCS Phone - The Basics 27

Section 2B

Controlling Your Phone’s Settings

In This Section

ᮣ

Sound Settings

Display Settings

Location Settings

Airplane Mode

TTY Access

Phone Setup Options

his section describes how you can change your phone’s

_{settings to best suit your needs. Take a few moments to review}

these options and add or adjust the settings that are right for you.

Section 2: Understanding Your PCS Phone

2B: Controlling Your Phone’s Settings 29

Sound Settings

Adjusting the Phone’s Volume Settings

To adjust the ringer, earpiece, key beep, or power on/off volume:

1. Highlight Settings and press

2. Highlight Sounds and press

3. Highlight Ringer, Earpiece, Key Beep, or PWR On/Off and

press

4. Highlight a volume setting and press

Tip: You can adjust the ringer volume in standby mode (or the earpiece

volume during a call) by using the volume keys on the side of your phone.

Selecting a Key Tone Length

Your phone offers you the option of selecting long or short

tone lengths for key presses. Longer tone lengths may better

facilitate tone recognition when dialing voicemail or other

automated systems.

To select a tone length:

1. Highlight Settings and press

2. Highlight Sounds and press

3. Highlight Tone Length and press

4. Highlight Short or Long and press

Section 2: Understanding Your PCS Phone

30 2B: Controlling Your Phone’s Settings

Ringer Types

Ringer types help you identify incoming calls and messages.

You can assign ringer types to individual phone book entries,

types of calls, and types of messages.

ᮣ

Preprogrammed Ringers include a variety of standard ringer

types and familiar music.

ᮣ

Vibrating Ringer alerts you to calls or messages without

disturbing others.

Selecting Ringer Types for Voice Calls

Your PCS Phone provides a variety of ringer options which

allow you to customize your ring and volume settings.

To select a ringer type for voice calls so you recognize when a

certain type of call is coming in by the ringer:

1. Highlight Settings and press

2. Highlight Sounds and press

3. Highlight Ringer Type and press

4. Highlight Voice Calls and press

5. Highlight With Caller ID, No Caller ID, or Roaming and

press

6. Highlight a ringer type and press

. You will hear a

preview of the ringer type when you highlight it.

Selecting Ringer Types for Messages

To select a ringer type for messages:

1. Highlight Settings and press

2. Highlight Sounds and press

3. Highlight Ringer Type and press

4. Highlight Messages and press

5. Highlight Voicemail or Page/Text and press

6. Highlight a ringer type and press . You will hear a

preview of the ringer type when you highlight it.

Section 2: Understanding Your PCS Phone

2B: Controlling Your Phone’s Settings 31

Alert Notification

To enable or disable alert sounds for a variety of situations:

1. Highlight Settings and press

2. Highlight Sounds and press

3. Highlight Alert and press

4. To select an option, highlight it and press

ᮣ

Service Change to alert you when you exit or enter the

enhanced Sprint Nationwide PCS Network.

Messages to alert you when you receive a voicemail or

page/text message.

Minute Beep to play a beep once a minute while you are on

a call. (The beep is not audible to the other party.)

Call Connect to alert you when an outgoing call has been

connected.

5. Highlight On or Off and press

Silent Mode

There may be times when you need to silence your phone

entirely. The phone’s Silent Mode option allows you to mute all

sounds without turning your phone off.

To activate Silent Mode:

ᮣ

Press and hold the volume down key in standby mode. An

alert will display informing you that the option will mute all

sound. The screen will then display “Silent Mode.”

To deactivate Silent Mode:

ᮣ

Press and hold the volume up key in standby mode. An alert

will inform you that the option will restore all sound.

Silent Mode may also be accessed through the phone’s

Settings menu:

1. Highlight Settings and press

2. Highlight Sounds and press

3. Highlight Silent Mode and press

4. Highlight On or Off and press

Section 2: Understanding Your PCS Phone

32 2B: Controlling Your Phone’s Settings

Display Settings

Changing the Backlight Time Length

The backlight setting lets you select how long the display

screen and keypad are backlit after any key press is made.

To change the backlight setting:

1. Highlight Settings and press

2. Highlight Display and press

3. Highlight Backlight and press

4. Highlight 8 Seconds, 15 Seconds, 30 Seconds, Off, or

Always On and press

Note: Long backlight settings affect the battery’s talk and standby times.

Changing the Greeting

The greeting can be up to twelve characters and is displayed on

your phone’s screen in standby mode.

To display or change your custom greeting:

1. Highlight Settings and press

2. Highlight Display and press

3. Highlight Greeting and press

4. Highlight Change and press

5. Press and hold

to clear the current greeting.

6. Enter your new greeting text. (See “Entering Text” on

page 25.)

7. When you are finished, highlight Save and press

. To

discard your changes, highlight Exit and press

Section 2: Understanding Your PCS Phone

2B: Controlling Your Phone’s Settings 33

Changing the Contrast

To adjust the contrast on the phone’s display:

1. Highlight Settings and press

2. Highlight Display and press

3. Highlight Contrast and press

4. Highlight a contrast level and press

. The screen will

display the effects of the settings as you highlight them.

Changing the Power On/Off and Screen Saver

Display Options

Your new PCS Phone offers options for what you see on the display

screen while powering on or off and as a screen saver while in

standby mode.

Power On/Off

To assign an image for Power On or Power Off:

1. Highlight Settings and press

2. Highlight Display and press

3. Highlight Screen and press

4. Highlight Power On/Off and press

5. Highlight Power On or Power Off and press

6. Highlight Item 1, Item 2, or Item 3 and press

7. To select an option, highlight it and press

ᮣ

View to see a preview of the selected item. (Press

to return to the option menu.)

ᮣ

Assign to assign the selected item.

Section 2: Understanding Your PCS Phone

34 2B: Controlling Your Phone’s Settings

Screen Saver

To assign an image for Screen Saver mode:

1. Highlight Settings and press

2. Highlight Display and press

3. Highlight Screen and press

4. Highlight Screen Saver and press

5. Highlight Images and press

6. Highlight Item 1, Item 2, or Item 3 and press

7. To select an option, highlight it and press

ᮣ

View to see a preview of the selected item. (Press

to return to the option menu.)

ᮣ

Assign to assign the selected item.

To activate or deactivate Screen Saver mode:

1. Highlight Settings and press

2. Highlight Display and press

3. Highlight Screen and press

4. Highlight Screen Saver and press

5. Highlight On/Off and press

6. Highlight On or Off and press

Changing the Display Language

To change the language of y our phone’s display:

1. Highlight Settings and press

2. Highlight Display and press

3. Highlight Language and press

4. Highlight English or Spanish and press

Roaming Settings

For information on using your phone’s roaming options, see

Section 2D: Controlling Your Roaming Experience on page 43.

Section 2: Understanding Your PCS Phone

2B: Controlling Your Phone’s Settings 35

Location Settings

Your PCS Phone is equipped with a Location feature which will

allow the network to detect your position, making some

PCS Applications easier to use. Turning Location off will hide

your location from everyone except 911.

Note: Even if the Location feature is enabled, no service may use your

location without your expressed permission.

To enable your phone’s Location feature:

1. Highlight Settings and press

2. Highlight Location and press

3. You will see a disclaimer outlining your phone’s Location

feature. Press to continue.

4. Highlight On or Off and press

When the Location feature is on, you phone’s standby screen

will display the icon. When Location is turned off, the icon

will display.

Security Settings

For information on your phone’s security settings, see

Section 2C: Setting Your Phone’s Security on page 39.

Phone Setup Options

Call Answer Mode

To set the actions required to answer an incoming call:

1. From the main menu, highlight Settings and press

2. Highlight Setup and press

3. Highlight Anykey Answer and press

4. Highlight On or Off and press

ᮣ

On allows you to answer incoming calls by opening the

phone or by pressing any key.

ᮣ

Off requires you to press

to answer all incoming calls.

Section 2: Understanding Your PCS Phone

36 2B: Controlling Your Phone’s Settings

Auto-Answer Mode

To answer calls when your phone is connected to an optional

hands-free car kit:

1. From the main menu, highlight Settings and press

2. Highlight Setup and press

3. Highlight Car Auto-Answer and press

4. To select an option, highlight it and press

ᮣ

Off to answer calls normally when connected to a hands-free

car kit.

ᮣ

Auto Answer to have the phone answer calls automatically

after three rings when connected to a hands-free car kit.

Remember, your phone will answer all incoming calls in

Auto Answer mode – even if you are not present.

TTY Use With PCS Service From Sprint

A TTY (also known as a TDD or Text Telephone), is a

telecommunications device that allows people who are deaf or

hard of hearing, or who have speech or language disabilities, to

communicate via a telephone.

Your phone is compatible with select TTY devices. Please

check with the manufacturer of your TTY device to ensure that

it supports digital wireless transmission. Your phone and TTY

device will connect via a special cable that plugs into your

phone's headset jack. If this cable was not provided with your

TTY device, contact your TTY device manufacturer to purchase

the connector cable.

When establishing your PCS Service, please call PCS Customer

Service Solutions^SMvia the state Telecommunications Relay

Service (TRS) by first dialing

. Then provide

the state TRS with this number: 866-727-4889.

Section 2: Understanding Your PCS Phone

2B: Controlling Your Phone’s Settings 37

To turn TTY Mode on or off:

1. From the main menu, dial

, highlight

Save, and press

2. Highlight Enable or Disable and press

. A message will

display confirming your choice and your phone will return

to standby mode.

Note: In TTY Mode, your phone will display

Note: If TTY mode is enabled, the audio quality of non-TTY devices

connected to the headset jack may be impaired.

IMPORTANT NOTICE: 911 Emergency Calling

Sprint recommends that TTY users make emergency calls by other means

including Telecommunications Relay Services (TRS), analog cellular, and

landline communications. Wireless TTY calls to 911 may be corrupted

when received by public safety answering points (PSAPs) rendering some

communications unintelligible. The problem encountered appears related

to TTY equipment or software used by PSAPs. This matter has been

brought to the attention of the FCC, and the wireless industry and PSAP

community are currently working to resolve this.

Section 2: Understanding Your PCS Phone

38 2B: Controlling Your Phone’s Settings

Section 2C

Setting Your Phone’s Security

In This Section

ᮣ

Accessing the Security Menu

Locking Your Phone

Unlocking Your Phone

Using Special Numbers

Security Features for PCS Vision

y using the security setting on your PCS Phone, you receive

B_{peace of mind without sacrificing flexibility. With several}

options available, you can customize your phone to meet your

personal needs.

Section 2: Understanding Your PCS Phone

2C: Setting Your Phone’s Security 39

Accessing the Security Menu

You must enter your lock code to view the Security menu.

To access the Security menu:

1. From the main menu, highlight Settings and press

2. Highlight Security and press

3. Enter your lock code. The Security menu is displayed.

Tip: If you can’t recall your lock code, try using the last four digits of either

your Social Security number or PCS Phone Number or try 0000. If none of

these work, call PCS Customer Service Solutions at 1-888-211-4PCS (4727).

Locking Your Phone

When your phone is locked, you can only receive incoming

calls or make calls to 911, PCS Customer Service Solutions, or

special numbers.

To lock your phone:

1. From the Security menu, highlight Lock Phone and

press

. (See “Accessing the Security Menu” on this page.)

2. Highlight Lock Now and press

. A message will confirm

that the phone is locked. When the phone returns to

standby mode, --Locked-- will appear on the display.

Unlocking Your Phone

To unlock your phone:

1. Highlight Unlock and press

2. Enter your lock code.

Changing the Lock Code

To change your lock code:

1. From the Security menu, highlight Change Lock Code and

press . (See “Accessing the Security Menu” on this page.)

2. Enter your new lock code.

3. Re-enter your new lock code.

Section 2: Understanding Your PCS Phone

40 2C: Setting Your Phone’s Security

Calling in Lock Mode

You can place calls to 911 and to your special numbers when in

lock mode. (For information on special numbers, see “Using

Special Numbers” on page 41.)

To place an outgoing call in lock mode:

ᮣ

To call an emergency number or a special number, enter the

phone number and press

Tip: To dial a 911 emergency call in lock mode, you can also highlight

Call 911 and press

Using Special Numbers

You can save four special numbers in addition to your Internal

Phone Book entries (the same number may be in both

directories). You can make and receive calls from special

numbers even when your phone is locked.

To add or replace a special number:

1. From the Security menu highlight Special #s and press

(See “Accessing the Security Menu” on page 40.)

2. Highlight an entry location and press

3. Enter or replace the special number.

4. Highlight OK and press

Note: There are no Speed Dial options associated with special numbers.

Erasing the Internal Phone Book

To erase all the names and phone numbers in your Internal

Phone Book:

1. From the Security menu, highlight Erase PhoneBook and

press

. (See “Accessing the Security Menu” on page 40.)

2. A warning will display informing you that the action will

erase the entire phone book content. If you wish to

continue, highlight Yes and press

Section 2: Understanding Your PCS Phone

2C: Setting Your Phone’s Security 41

Resetting Your Phone

Resetting the phone restores all the factory defaults, including

the ringer types and display settings. The Internal Phone Book,

Call History, Scheduler, and Messaging are not affected.

To reset your phone:

1. From the Security menu, highlight Reset Phone and press

. (See “Accessing the Security Menu” on page 40.)

2. A warning will display informing you that settings will be

restored to the factory defaults. If you wish to continue,

highlight Yes and press

Section 2: Understanding Your PCS Phone

42 2C: Setting Your Phone’s Security

Section 2D

Controlling Your Roaming

Experience

In This Section

ᮣ

Understanding Roaming

Setting Your Phone’s Roam Mode

Controlling Roaming Charges Using Call Guard

oaming is the ability to make or receive calls while you’re off

_{the enhanced Sprint Nationwide PCS Network. Your new}

single band PCS Phone works anywhere on the enhanced Sprint

Nationwide PCS Network and allows you to roam in limited areas

where 1900 MHz digital networks are available.

This section explains how roaming works as well as special

features that let you manage your roaming experience.

Section 2: Understanding Your PCS Phone

2D: Controlling Your Roaming Experience 43

Understanding Roaming

Recognizing Icons on the Display Screen

Your phone’s display screen always lets you know when you’re

off the enhanced Sprint Nationwide PCS Network. The following

chart indicates what you’ll see depending on where you’re using

your phone.

Roaming

Indicator

Sprint Nationwide PCS Network

Other Digital Networks

Tip: Remember, when you are using your phone off the Sprint Nationwide

PCS Network, always dial numbers using 11 digits (1 + area code + number).

Note: You will pay a higher per-minute rate for roaming calls.

Roaming on Other Digital Networks

When you’re roaming on digital networks, your call quality and

security will be similar to the quality you receive when making

calls on the enhanced Sprint Nationwide PCS Network. You may

not be able to access certain features.

Note: If you’re on a call when you leave the Sprint Nationwide PCS

Network and enter an area where roaming is available (whether digital or

analog), your call is dropped. If your call is dropped in an area where you

think PCS Service is available, turn your phone off and on again to

reconnect to the Sprint Nationwide PCS Network.

Section 2: Understanding Your PCS Phone

44 2D: Controlling Your Roaming Experience

Setting Your Phone’s Roam Mode

Your PCS Phone allows you to control your ability to roam.

By using the Roaming menu option, you determine which

signals your phone accepts.

Set Mode

Choose from two different settings on your single band phone

to control your roaming experience:

1. From the main menu, highlight Settings and press

2. Highlight Roaming and press

3. Highlight Select Mode and press

4. To select an option, highlight it and press

ᮣ

Sprint PCS: This setting allows you to access the enhanced

Sprint Nationwide PCS Network only and prevents roaming

on other networks.

ᮣ

Automatic: This setting seeks PCS Service. When PCS Service

is unavailable, the phone searches for an alternate system.

Section 2: Understanding Your PCS Phone

2D: Controlling Your Roaming Experience 45

Call Guard

In addition to the roaming icon, Call Guard alerts you when

roaming charges apply. This feature makes it easy to manage

your roaming charges by reminding you when you make or

receive roaming calls. It also requires you to take an additional

step before placing or answering a roaming call. This additional

step is not required when you make or receive calls while on

the enhanced Sprint Nationwide PCS Network.

To Turn Call Guard On or Off:

1. From the main menu, highlight Settings and press

2. Highlight Roaming and press

3. Highlight Call Guard and press

4. Highlight On or Off and press

Note: Speed Dialing is not available when you are roaming with

Call Guard enabled.

To Place Roaming Calls With Call Guard On:

1. From standby mode, dial 1 + area code + the seven-digit

number and press .. (You can also initiate a call from

the Internal Phone Book, Call History, or Messaging.)

2. Select Roam Call and press

To Answer Incoming Roaming Calls With Call Guard On:

1. Press

2. A message will appear notifying you that roaming charges

will apply. Highlight Answer and press

Section 2: Understanding Your PCS Phone

46 2D: Controlling Your Roaming Experience

Section 2E

Navigating Through Menus

In This Section

ᮣ

Menu Navigation

Menu Structure

Viewing Menus

his section is a road map to using your PCS Phone. Every

_{function and feature can be accessed through a menu. Take a}

few moments to learn your way around. You’ll find that it makes

your phone easier to use.

Section 2: Understanding Your PCS Phone

2E: Navigating Through Menus 47

Menu Navigation

The navigation key on your PCS Phone allows you to scroll

through menus quickly and easily. The scroll bar at the right of

the menu keeps track of your position in the menu at all times.

To navigate through a menu, simply press the navigation key

up or down to highlight menu options. To select an option,

highlight it and press

Menu Structure

Selecting Menu Items

As you navigate through the menu, menu options are

highlighted. To select an option, simply highlight it and

press

For example, if you want to view your last incoming call:

1. From the main menu, highlight Call History and press

(It may already be highlighted.

2. Highlight Incoming Calls and press

. The most recent

calls you have received will be displayed on the screen.

Backing Up Within a Menu

To go to the previous menu:

ᮣ

Press

To return to standby mode:

Press

ᮣ

Section 2: Understanding Your PCS Phone

48 2E: Navigating Through Menus

Viewing the Menus

Menu Diagram

The following list outlines your phone’s menu structure.

Call History

Outgoing Calls

Incoming Calls

Missed Calls

Erase Calls

Outgoing Calls

Incoming Calls

Missed Calls

All Calls

Phone Book

Find Name

Add New Entry

My Phone #

Speed Dial #s

Services

Cust. Solutions/Dir Assist/Account Info/Prepaid

Messages

Page/Text

Edit Folder

Settings

Auto Save

Auto Delete

2 Min Alert

Erase All Msgs

On/Off

Yes/No

Voicemail

Call Voicemail

Clear Count

Yes/No

Settings

Sounds

Audio Volume

Ringer

High/Medium High/Medium Low/Low/

Vibrate/Off

Earpiece

Key Beep

High/Medium High/Medium Low/Low

High/Medium High/Medium Low/Low/Off

High/Low/Off

PWR On/Off

Tone Length

Ringer Type

Voice Calls

Short/Long

With Caller ID (ring types)

No Caller ID (ring types)

Roaming

Messages

Voicemail

Page/Text

(ring types)

Alert

Service Change On/Off

Messages

On/Off

Section 2: Understanding Your PCS Phone

2E: Navigating Through Menus 49

Minute Beep

Call Connect

Silent Mode

On/Off

Display

Backlight

8 Seconds/15Seconds/30 Seconds/

Off/Always On

Greeting

Contrast

Screen

Keep/Change

High/Medium High/Medium/Medium Low/Low

Power On/Off

Power On

Power Off

Screen Saver

Images

Item 1/Item 2/Item 3(View/Assign)

On/Off

Language

English/Spanish

Roaming

Set Mode

Call Guard

Sprint PCS/Automatic

On/Off

Location

On/Off

Security

(Enter Lock Code)

Lock Phone

Change Lock Code

Special #s

Erase PhoneBook Yes/No

Reset Phone

Setup

Anykey Answer

Yes/No

On/Off

Car Auto-Answer Off/Auto Answer

Phone Info

Tools

Scheduler

Add Event

Erase Event

Today

Week View

Month View

Purge

Purge All

Information

(Help)

Calculator

Games

Mobile Hawk

Black Jack 2

Game Options

Sound

High/Medium High/Medium Low/Low/Off

On/Off

BackLight

Section 2: Understanding Your PCS Phone

50 2E: Navigating Through Menus

Section 2F

Managing Call History

In This Section

ᮣ

Viewing History

Call History Options

Making a Call From Call History

Saving a Phone Number From Call History

Erasing Call History

he Call History keeps track of incoming calls, calls made from

_{your PCS Phone, and missed calls. This section guides you}

through accessing and making the most of your Call History.

Section 2: Understanding Your PCS Phone

2F: Managing Call History 51

Viewing Call History

You’ll find the Call History feature very helpful. It is a list of the

last 10 phone numbers (or Internal Phone Book entries) for

calls you placed, accepted, or missed. Call History makes

redialing a number fast and easy. It is continually updated as

new numbers are added to the beginning of the list and the

oldest entries are removed from the bottom of the list.

Each entry contains the phone number (if it is available) and

Internal Phone Book entry name (if the phone number is in

your Internal Phone Book). Duplicate calls (same number and

type of call) may only appear once on the list.

To view a Call History entry:

1. From the main menu, highlight Call History and press

2. Highlight Outgoing Calls, Incoming Calls, or Missed Calls and

press

3. Highlight the Call History entry you wish to view and

press

Call History Options

For additional information and options on a particular call,

highlight a Call History entry and press

option, highlight it and press

. To select an

ᮣ

Call to dial the phone number (if available)

ᮣ

Phonebook Info. to display the entry’s Internal Phone Book

entry (if the number is in your Internal Phone Book).

– or –

Save to save the phone number if it is not already in your

Internal Phone Book. (See “Saving a Phone Number From

Call History” on page 54.)

ᮣ

Time/Date to see the time and date of the selected entry.

Prepend to add numbers to the beginning of the phone

number. (See “Prepending a Phone Number From Call

History” on page 55.)

Section 2: Understanding Your PCS Phone

52 2F: Managing Call History

ᮣ

Erase to erase the entry from Call History.

Next to display the next Call History entry.

Previous to display the previous Call History entry.

Tip: You can also view the next Call History entry by pressing the

navigation key right or view the previous entry by pressing the navigation

key left.

Making a Call From Call History

To place a call from Call History:

1. From the main menu, highlight Call History and press

2. Highlight Outgoing Calls, Incoming Calls, or Missed Calls and

press

3. Highlight the entry you wish to call and press

4. Highlight Call and press

Note: You cannot make calls from Call History to entries identified as

No ID or Restricted. Calls labeled Data or Fax can only be dialed through

a personal computer.

Section 2: Understanding Your PCS Phone

2F: Managing Call History 53

Saving a Phone Number From Call History

Your PCS Phone can store up to 99 Internal Phone Book

entries. Phone Book entries can store up to a total of five phone

numbers and each entry’s name can contain sixteen characters.

To save a phone number from Call History:

1. From the main menu, highlight Call History and press

2. Highlight Outgoing Calls, Incoming Calls, or Missed Calls and

press

3. Highlight the number you wish to save and press

4. Highlight Save and press

5. Highlight a label for the number and press

6. Enter a name for the Internal Phone Book entry (see

“Entering Text” on page 25) and press . You may also

add the number to an existing phone book entry by

highlighting the desired entry and pressing

the entry contains fewer than five numbers and there is no

other number within the entry with the same label as the

new number.

, as long as

7. To select an option, highlight it and press

ᮣ

Done to save the entry.

Set Speed Dial to select a speed dial location for the entry.

Highlight an available location and press . (See “Using

One-Touch/Two-Touch Speed Dialing” on page 25.)

ᮣ

After you have saved the number, the new Internal Phone Book

entry is displayed. (See “Internal Phone Book Entry Options” on

page 59.)

Note: You cannot save phone numbers already in your Internal Phone

Book or from calls identified as No ID or Restricted.

Section 2: Understanding Your PCS Phone

54 2F: Managing Call History

Prepending a Phone Number From

Call History

If you need to make a call from Call History and you happen to

be outside your local area code, you can add the appropriate

prefix by following these steps:

1. From the main menu, highlight Call History and press

2. Highlight Outgoing Calls, Incoming Calls, or Missed Calls and

press

3. Highlight the number you wish to prepend and press

4. Highlight Prepend and press

5. Enter the digits or pauses (see below) you wish to add to

the number. If you want to save the number, select the Save

option. If not, the changes apply only for the current call.

6. To select an option, highlight it and press

ᮣ

Call to dial the phone number.

Save to save the phone number in your Internal Phone Book.

Hard Pause to insert a hard pause. (See “Dialing and Saving

Phone Numbers With Pauses” on page 23.)

ᮣ

2-Second Pause to insert a two-second pause. (See “Dialing

and Saving Phone Numbers With Pauses” on page 23.)

Erasing Call History

To erase individual Call History entries, see “Call History

Options” on page 52.

To erase Call History:

1. From the main menu, highlight Call History and press

2. Highlight Erase Calls and press

3. Highlight Outgoing Calls, Incoming Calls, Missed Calls, or All

Calls and press

4. A confirmation prompt will appear (for example,

“Erase Missed?”). Highlight Yes and press

Section 2: Understanding Your PCS Phone

2F: Managing Call History 55

Section 2G

Using the Internal Phone Book

In This Section

ᮣ

Internal Phone Book Entry Options

Adding a New Internal Phone Book Entry

Finding Internal Phone Book Entries

Selecting a Ringer Type

Dialing PCS Services

ow you know the basics that make it easier to stay in touch

_{with people and information. This section helps you make}

the most of your contacts and time when you are trying to

connect with the important people in your life.

Section 2: Understanding Your PCS Phone

2G: Using the Internal Phone Book 57

Displaying an Internal Phone Book Entry

Your new PCS Phone’s Internal Phone Book helps you make the

most of your time by storing and organizing important numbers

and information about your frequent contacts.

There are several ways to find and display Internal Phone Book

entries. Follow the steps outlined below to display entries:

Finding Names

To find and display an Internal Phone Book entry by name:

1. From the main menu, highlight Phone Book and press

2. Highlight Find Name and press

to display a list of all

current entries.

Shortcut: Press the navigation key left to display the “Find Name” list of all

current entries.

3. Scroll to highlight the entry you wish to display and

press

entering any part of the entry’s name to select it and then

press to display the entry.

to display it. You may also narrow your search by

Note: When entering text to search for an entry, the Abc mode of text

entry applies. (See “Entering Text” on page 25.) The phone searches for

any consecutive string of letters in an entry’s name, so entering “r” or “er”

would find “Jerry”; entering “jr” would not.

Finding Numbers

To find and display an Internal Phone Book entry by phone

number:

1. Enter a number or a string of numbers in standby mode.

2. Highlight Find and press

3. Highlight the number contained in the Internal Phone Book

entry you wish to display and press

to display the entry.

Section 2: Understanding Your PCS Phone

58 2G: Using the Internal Phone Book

Finding Speed Dial Numbers

To find and display an Internal Phone Book entry using its

speed dial number:

1. Enter a speed dial number from standby mode.

2. Highlight the Internal Phone Book entry name and press

to display the entry.

Internal Phone Book Entry Options

To access an Internal Phone Book Entry’s options, display the

entry (see above). The options menu will display below the

entry’s name and default phone number. To select an option,

highlight it and press

ᮣ

Call to dial the entry’s selected (default) phone number. (If

you are roaming and have Call Guard activated, highlight

Roam Call and press . See “Call Guard” on page 46.)

ᮣ

[Additional Phone Numbers] to select an alternate phone

number (if the entry has more than one phone number).

Add Phone # to add a phone number to the entry. (See

“Adding a Phone Number to an Internal Phone Book Entry”

on page 60.)

ᮣ

Edit Number to change the selected phone number or add or

delete its speed dial setting. (See “Editing an Internal Phone

Book Entry’s Phone Number” on page 61.)

Edit Entry to change the entry’s default number, ringer type,

name, email, or secret mode. (See “Editing an Internal

Phone Book Entry” on page 62.)

View E-Mail to display the entry’s email address (if

applicable). (See “Editing an Internal Phone Book Entry” on

page 62.)

Erase Number to delete one of the entry’s alternate phone

numbers. (You must first select an alternate phone number

by highlighting it and pressing

entry’s default phone number.

.) You cannot delete an

ᮣ

Erase Entry to delete the entry and all its information from

your Internal Phone Book.

Tip: You can view the next entry by pressing the navigation key right or

view the previous entry by pressing the navigation key left.

Section 2: Understanding Your PCS Phone

2G: Using the Internal Phone Book 59

Adding a New Internal Phone Book Entry

Your PCS Phone can store up to 99 Internal Phone Book

entries. Phone book entries can store up to a total of five phone

numbers and an entry’s name can contain sixteen characters.

To add a new entry:

1. From the main menu, highlight Phone Book and press

2. Highlight Add New Entry and press

3. Enter a name for the entry or highlight Save w/o Name and

press . (See “Entering Text” on page 25.)

4. Enter a phone number, highlight Next Step and press

5. Highlight a label for the entry and press

6. To select an option, highlight it and press

ᮣ

Done to save the entry.

Set Speed Dial to save the entry in an available speed dial

location. Highlight an available location and press . (See

“Using One-Touch/Two-Touch Speed Dialing” on page 25.)

ᮣ

After you have saved the number, the new Internal Phone Book

entry is displayed. (See “Internal Phone Book Entry Options” on

page 59.)

Adding a Phone Number to an Internal Phone

Book Entry

To add a phone number to an entry:

1. Display an Internal Phone Book entry. (See “Displaying an

Internal Phone Book Entry” on page 58.)

2. Highlight Add Phone # and press

3. Enter the phone number with area code, highlight Next Step

and press

4. Select a label for the phone number and press

Section 2: Understanding Your PCS Phone

60 2G: Using the Internal Phone Book

5. To select an option, highlight it and press

ᮣ

Done to save the entry.

Set Speed Dial to save the entry in an available speed dial

ᮣ

location. Highlight an available location and press

. (See

“Using One-Touch/Two-Touch Speed Dialing” on page 25.)

After you have saved the number, the Internal Phone Book

entry is displayed. (See “Internal Phone Book Entry Options” on

page 59.)

Note: Phone numbers labeled Fax or Data can only be dialed through a

personal computer.

Editing an Internal Phone Book Entry’s

Phone Number

To edit an entry’s phone number:

1. Display an Internal Phone Book entry. (See “Displaying an

Internal Phone Book Entry” on page 58.)

2. If you wish to edit the entry’s default phone number,

proceed to step 3. If you wish to edit an alternate number,

highlight it and press

3. Highlight Edit Number and press

4. To select an option, highlight it and press

Edit Number to change the entry’s phone number. Press

to erase the current number one digit at a time, or press and

hold to erase the entire number. Follow the steps

ᮣ

outlined in “Adding a Phone Number to an Internal Phone

Book Entry” on page 60.

ᮣ

Set Speed Dial to assign the number to an available speed

dial location or Erase Speed Dial to erase the number’s

speed dial assignment (if already assigned). (See “Using

One-Touch/Two-Touch Speed Dialing” on page 25.)

After you have saved the number, the Internal Phone Book

entry is displayed. (See “Internal Phone Book Entry Options”

on page 59.)

Section 2: Understanding Your PCS Phone

2G: Using the Internal Phone Book 61

Editing an Internal Phone Book Entry

To make changes to an entry:

1. Display an Internal Phone Book entry. (See “Displaying an

Internal Phone Book Entry” on page 58.)

2. Highlight Edit Entry and press

3. To select an option, highlight it and press

ᮣ

Set Default # to change the entry’s default phone number.

Highlight a number and press

Ringer Type to select a ringer type to play when you receive

a call from the entry. Highlight a ringer type and press

(You will hear a preview of the ringer type when highlighted.)

ᮣ

Name to edit the entry’s name. (See “Entering Text” on

page 25.)

E-Mail to add or change the entry’s email address.

(See “Entering Text” on page 25.)

Secret Mode to set the entry’s secret mode status.

(See “Secret Internal Phone Book Entries” on page 63.)

After you have saved the changes, the Internal Phone Book

entry is displayed. (See “Internal Phone Book Entry Options” on

page 59.)

Selecting a Ringer Type for an Entry

You can assign a ringer type to an Internal Phone Book entry so

you can identify the caller by the ringer type. (See “Ringer

Types” on page 31.)

To select a ringer type for an entry:

1. Display an Internal Phone Book entry. (See “Displaying an

Internal Phone Book Entry” on page 58.)

2. Highlight Edit Entry and press

3. Highlight Ringer Type and press

4. Use your navigation key to scroll through available ringers

(when you highlight a ringer type a sample ringer will

sound). Highlight your desired ringer and press

5. Press the left softkey button (Done) to save the new

ringer type.

Section 2: Understanding Your PCS Phone

62 2G: Using the Internal Phone Book

Secret Internal Phone Book Entries

You can hide an entry’s phone number(s) and require your lock

code to edit the entry by making it secret. The entry name is

still displayed, but the entry’s phone numbers are replaced by

“(SECRET)”.

To make an entry secret:

1. Display an Internal Phone Book entry. (See “Displaying an

Internal Phone Book Entry” on page 58.)

2. Highlight Edit Entry and press

3. Highlight Secret Mode and press

4. The prompt, “Make Secret?,” will display. Highlight Yes and

press

After you have saved the changes, the Internal Phone Book

entry is displayed. (See “Internal Phone Book Entry Options” on

page 59.)

To make an entry public:

1. Display a secret Internal Phone Book entry.

2. Highlight Edit Entry and press

3. Enter your lock code.

4. Highlight Secret Mode and press

5. The prompt, “Make Secret?,” will display. Highlight No and

press

Tip: If you can’t recall your lock code, try using the last four digits of either

your Social Security number or PCS Phone Number or try 0000. If none of

these work, call PCS Customer Solutions at 1-888-211-4PCS (4727).

After you have saved the changes, the Internal Phone Book

entry is displayed. (See “Internal Phone Book Entry Options” on

page 59.)

Section 2: Understanding Your PCS Phone

2G: Using the Internal Phone Book 63

Managing Speed Dial Settings

In addition to assigning and deleting speed dial locations

through the Edit Number menu (see “Editing an Internal Phone

Book Entry’s Phone Number” on page 61), you can manage

speed dial settings directly through the Speed Dial #s menu.

To manage your speed dial settings:

1. From the main menu, highlight Phone Book and press

2. Highlight Speed Dial #s and press

3. Highlight a location or enter one using your keypad and

press

4. To select an option, highlight it and press

ᮣ

Set Speed Dial to assign a number to the selected location.

To assign a number, highlight an Internal Phone Book entry

and press

and then highlight a number from the entry

ᮣ

Next Empty to go to the next available speed dial location.

Erase Speed Dial to erase the speed dial number assigned to

the selected location.

ᮣ

Erase All to erase all speed dials.

(Exit) to return to the main menu.

Dialing PCS Services

You must be in digital mode to access PCS Services.

To dial a service:

1. From the main menu, highlight Phone Book and press

2. Highlight Services and press

3. Highlight Cust. Solutions, Dir Assist, Account Info, or Prepaid

and press

4. Highlight Call and press

Section 2: Understanding Your PCS Phone

64 2G: Using the Internal Phone Book

Section 2H

Using the Scheduler, Calculator,

and Games

In This Section

ᮣ

Adding an Event to the Scheduler

Event Alerts

Viewing Events

Using the Calculator

Playing Games

our PCS Phone is equipped with several tools, including

_{personal information management features that help you}

manage your busy lifestyle. These features turn your phone into a

time management planner that helps you keep up with your

contacts, schedules, and commitments. It takes productivity to a

whole new level.

Section 2: Understanding Your PCS Phone

2H: Using the Scheduler, Calculator, and Games 65

Using the Scheduler

Adding an Event to the Scheduler

Your Scheduler helps organize your time and reminds you of

important events.

To add an event:

1. From the main menu, highlight Tools and press

2. Highlight Scheduler and press

3. Using your navigation key, highlight the day to which you

want to add a scheduled event and press

Tip: Press the navigation key or volume button up or down to scroll by

week through the Scheduler calendar or

and

to scroll by year.

4. Highlight Add Event and press

5. Enter a title, highlight Next Step, and press

(See “Entering Text” on page 25.)

6. Using your keypad, enter the time and date of the event

(which are displayed at the top of the screen). To toggle

between A.M. and P.M., highlight AM/PM and press

7. To select an option, highlight it and press

ᮣ

Done to save the event in your Scheduler.

Ringer Type to select a ringer to play when an alarm is

scheduled for the event. To select a ringer, highlight it and

press

. You will hear a preview of the ringer when you

highlight it

ᮣ

Edit Alarm to schedule the event’s alarm. (The default

setting is 10 Min. Before.) Highlight an alarm setting

(On Time, 10 Min. Before, 30 Min. Before, 1 Hour Before, or

No Alarm) and press

ᮣ

Edit Repeat to edit the event’s repeating status. (The default

setting is No Repeat.) Highlight a repeat setting (No Repeat,

Daily, Weekly, Monthly or Yearly) and press

Exit to return to the main menu without saving the event.

8. To schedule the event, highlight Done and press

Section 2: Understanding Your PCS Phone

66 2H: Using the Scheduler, Calculator, and Games

Event Alerts

There are several ways your PCS Phone alerts you of

scheduled events:

ᮣ

By playing the assigned ringer type.

By illuminating the backlight.

By flashing the LED.

By displaying the event’s description, time, and date.

Event Alert Menu

When your phone is turned on and you have an event alarm

scheduled, your phone alerts you and displays the event

summary. Press

to display the event alert menu.

To select an option, highlight it and press

ᮣ

OK to clear the alarm.

View Detail to display the event’s date, time, alarm,

repeating status, and title.

ᮣ

Snooze to repeat the alarm in five minutes.

Erase to delete the event from your Scheduler. Highlight Yes

and press

to confirm the deletion.

Viewing Events and Event Options

To view your scheduled events:

1. From the main menu, highlight Tools and press

2. Highlight Scheduler and press

3. Using your navigation key, highlight the day for which you

want to view scheduled events and press

Tip: Press the navigation key or volume button up or down to scroll by

week through the Scheduler calendar or and to scroll by year.

Tip: In Week View, the number of events scheduled is displayed under

days with scheduled events. In Month View, days with events scheduled

are underlined.

Section 2: Understanding Your PCS Phone

2H: Using the Scheduler, Calculator, and Games 67

4. Scheduled events are listed in chronological order above the

Scheduler menu options. To view an event’s details,

highlight the event and press

5. To display event options, press

again. To select an

option, highlight it and press

ᮣ

View Detail to display the event’s date, time, alarm,

repeating status, and title.

Erase to delete the event from your Scheduler. Highlight Yes

and press

to confirm the deletion.

Edit Content to change the event’s title. (See “Editing an

Event’s Title” on page 68.)

Change Settings to edit the event’s settings. (See “Editing an

Event’s Settings” on page 69.)

ᮣ

(Help) to display Scheduler help.

Next Event to display the next event.

Prev Event to display the previous event.

Editing an Event’s Title

To edit a scheduled event’s title:

1. From the Scheduler menu, highlight an event and press

(See “Viewing Events and Event Options” on page 67.)

2. Press

3. Highlight Edit Content and press

4. Press to erase the current title one letter at a time, or

press and hold to erase the entire title.

to display the event options.

5. Enter a new title and press

. (See “Entering Text” on

page 25.)

6. To save the new title, highlight Done and press

Section 2: Understanding Your PCS Phone

68 2H: Using the Scheduler, Calculator, and Games

Editing an Event’s Settings

Editing an Event’s Ringer Type

To edit the ringer type assigned to a scheduled event:

1. From the Scheduler menu, highlight an event and press

(See “Viewing Events and Event Options” on page 67.)

2. Press

to display the event options.

3. Highlight Change Settings and press

4. Highlight Ringer Type and press

5. Highlight a ringer type and press

to assign it to the

event. You will hear a preview of the ringer when you

highlight it.

6. To save the new setting, highlight Done and press

Editing an Event’s Alarm

To edit the alarm setting for a scheduled event:

1. From the Scheduler menu, highlight an event and press

(See “Viewing Events and Event Options” on page 67.)

2. Press

to display the event options.

3. Highlight Change Settings and press

4. Highight Edit Alarm and press

5. To select an option, highlight it and press

ᮣ

On Time to schedule the alarm to play at the time of the

scheduled event.

10 Min. Before to schedule the alert for 10 minutes before

the event.

30 Min. Before to schedule the alert for 30 minutes before

the event.

1 Hour Before to schedule the alert for an hour before the

event.

No Alarm to schedule no alarm for the event.

6. To save the new setting, highlight Done and press

Section 2: Understanding Your PCS Phone

2H: Using the Scheduler, Calculator, and Games 69

Editing an Event’s Repeating Status

To edit the repeating status for a scheduled event:

1. From the Scheduler menu, highlight an event and press

(See “Viewing Events and Event Options” on page 67.)

2. Press

to display the event options.

3. Highlight Change Settings and press

4. Highlight Edit Repeat and press

5. To select an option, highlight it and press

ᮣ

No Repeat to schedule a one-time event.

Daily to repeat the event every day.

Weekly to repeat the event every week.

Monthly to repeat the event every month.

Yearly to repeat the event annually.

6. To save the new setting, highlight Done and press

Erasing a Day’s Events

To erase a scheduled day’s events:

1. From the main menu, highlight Tools and press

2. Highlight Scheduler and press

3. Using your navigation key, highlight the day for which you

would like to erase events and press

4. Highlight Erase Events and press

5. Highlight Yes and press

Note: If the day for which you are erasing events contains a repeating

event, you will receive the following prompt: “This will erase all repeating

occurrences of this item(s).” Press . If you wish to erase all

occurrences of the event, highlight Yes and press ; if not, highlight No

and press

Section 2: Understanding Your PCS Phone

70 2H: Using the Scheduler, Calculator, and Games

Going to Today’s Scheduler Menu

ᮣ

If you are viewing the Scheduler menu for another date and

wish to return to the menu for today’s date, highlight Today

and press

Displaying the Week or Month View

ᮣ

If you are viewing the Scheduler menu for a selected day

and would like to view the week or month view containing

that day, highlight Week View or Month View and press

The setting will be saved the next time you access your

Scheduler.

Purging Events

To delete events scheduled before a specific time and date:

1. From the main menu, highlight Tools and press

2. Highlight Scheduler and press

3. Using your navigation key, highlight the date before which

you would like to purge Scheduler events and press

4. Highlight Purge and press

5. A confirmation prompt will display. Highlight Yes and

press

Note: If the first occurrence of a repeating event falls before the date for

which you are purging events, all subsequent occurrences of the

repeating event will also be deleted.

Purging All Events

To delete all scheduled events:

1. From the main menu, highlight Tools and press

2. Highlight Scheduler and press

3. Press again to access the Scheduler menu.

4. Highlight Purge All and press

5. A confirmation prompt will display. Highlight Yes and

press

Section 2: Understanding Your PCS Phone

2H: Using the Scheduler, Calculator, and Games 71

Viewing Scheduler Memory Space

To view available and used Scheduler memory space:

1. From the main menu, highlight Tools and press

2. Highlight Scheduler and press

3. Press again to access the Scheduler menu.

4. Highlight Information and press

Viewing Scheduler Help

To display a key function diagram for Scheduler use:

1. From the main menu, highlight Tools and press

2. Highlight Scheduler and press

3. Press again to access the Scheduler menu.

4. Highlight (Help) and press

Using the Calculator

Your phone comes with a built-in calculator function. To use

this feature, follow these easy steps:

1. From the main menu, highlight Tools and press

2. Highlight Calculator and press

3. Enter numbers using your keypad. Press

to enter a

decimal point. If you make a mistake while entering a

number, press

and hold

to erase it one digit at a time, or press

to erase the entire entry.

4. Mathematical functions may be assigned using the

navigation key. The display screen shows a diagram of the

functions’ corresponding locations. Press

display additional functions.

(shift) to

5. Press

to complete your calculation.

Section 2: Understanding Your PCS Phone

72 2H: Using the Scheduler, Calculator, and Games

Playing Games

Your new PCS Phone includes two built-in games to entertain

you in your spare time: Mobile Hawk, an action-packed

helicopter battle game, and Black Jack 2 a hand-held version of

the popular casino favorite.

To play a game on your PCS Phone:

1. From the main menu, highlight Tools and press

2. Highlight Games and press

3. Highlight Mobile Hawk or Black Jack 2 and press

4. To select an option, press the corresponding number key.

ᮣ

New Game to start a new game.

ᮣ

High Score to display the game’s high scores.

Press

to return to the game’s menu.

ᮣ

Key Info. to display a diagram of the game’s

function keys. Press

to return to the game’s menu.

Continue to continue a previously saved game.

Adjusting Games Settings

To adjust your phone’s Games settings:

1. From the main menu, highlight Tools and press

2. Highlight Games and press

3. Highlight Game Options and press

4. To select an option, highlight it and press

Sound to adjust the volume level for games. Highlight a

volume level and press

ᮣ

Tip: You can also adjust the sound level during game play by pressing the

volume button on the side of your phone.

ᮣ

BackLight to adjust the backlight setting for games.

Highlight On or Off and press

. This setting will apply to

games only.

Tip: You can also turn the Backlight on or off during game play by

pressing

Section 2: Understanding Your PCS Phone

2H: Using the Scheduler, Calculator, and Games 73

Section 3

Using PCS

Service Features

Section 3A

PCS Service Features:

The Basics

In This Section

ᮣ

Using Voicemail

Receiving PCS Messages

Using Caller ID

Responding to Call Waiting

Making a Three-Way Call

Using Call Forwarding

ow that you’ve mastered your phone’s fundamentals, it’s time

_{to explore the messaging and calling features that enhance}

your PCS Service.

Section 3: Using PCS Service Features

3A: The Basics 77

Messaging Basics

Knowing When You Have Messages

There are several ways your PCS Phone alerts you to new

messages:

ᮣ

By displaying a message on the screen

By sounding the assigned ringer type

By the LED blinking red

By displaying

messages,

at the top of your screen for voicemail

for text messages, or for both voice and

text messages

Message Types

There are two types of messaging features available from

your PCS Phone’s menu. You can receive voicemail and

PCS Messages (also known as page/text or SMS messages) as

long as your phone has enough memory to store them.

ᮣ

Voicemail automatically captures calls when you can’t

answer your phone or it is turned off. The voicemail system

sends a notification to your phone when you have new

voice messages and an asterisk (*) is displayed in front of the

Voicemail menu option. (See “Using Voicemail” on page 79.)

ᮣ

PCS Messages (appear on your phone’s menu as Page/Text

under the Messages option) include numeric pages, Email,

and Updates. (See “PCS Messages” on page 86.)

Section 3: Using PCS Service Features

78 3A: The Basics

Using Voicemail

Setting Up Your Voicemail

All unanswered calls to your PCS Phone are automatically

transferred to voicemail, even if your phone is in use or turned

off. Therefore, you will want to set up your PCS Voicemail and

personal greeting as soon as your PCS Phone is activated.

To set up voicemail:

1. Press and hold

2. Follow the system prompts to create your pass code, record

your greeting, record your name announcement, and

choose whether to activate One-Touch Message Access (a

feature that lets you access messages by pressing and

holding

and bypasses the need for you to enter your

pass code).

Note: The voicemail setup process may vary in certain Affiliate areas.

Voicemail Notification

There are several ways your PCS Phone alerts you:

ᮣ

By displaying a message on the screen.

By sounding the assigned ringer type.

By the LED blinking red.

By displaying

at the top of your screen.

Section 3: Using PCS Service Features

3A: The Basics 79

New Voicemail Message Alerts

When you receive a new voicemail message, your phone alerts you

and prompts you to call your voicemail. To call your voicemail,

press and hold

. To display your Missed Log, press

Important: When you are roaming off the enhanced Sprint Nationwide

PCS Network, you may not receive notification of new voicemail

messages. It is recommended that you periodically check your voicemail

by dialing 1 + area code + your PCS Phone Number. When your voicemail

answers, press

and enter your pass code. You will be charged

roaming rates when accessing voicemail while roaming off the enhanced

Sprint Nationwide PCS Network.

Note: Your phone accepts messages even when it is turned off. However,

you are only notified of new messages when your phone is turned on and

you are in a PCS Service Area.

Retrieving Your Voicemail Messages

You can review your messages directly from your PCS Phone or

from any other touch-tone phone. To dial from your PCS Phone,

you can either speed dial your voicemail or use the menu keys.

Using One-Touch Message Access:

ᮣ

Press and hold

. Follow the system prompts.

Using the Menu Keys on Your PCS Phone to Access Your Messages:

1. From the main menu, highlight Voicemail and press

2. Highlight Call Voicemail and press

Note: You are charged for airtime minutes when you are accessing your

voicemail from your PCS Phone.

Section 3: Using PCS Service Features

80 3A: The Basics

Using a Phone Other Than Your PCS Phone to Access Messages:

1. Dial your PCS Phone Number.

2. When your voicemail answers, press

3. Enter your pass code.

Tip: When you call into voicemail you first hear the header information

(date, time, and sender information) for th emessage. To skip directly to the

message, press

during the header.

Voicemail Button Guide

Here’s a quick guide to your keypad functions while listening to

voicemail messages. For further details and menu options, see

“Voicemail Menu Key” on page 85.

Date/Time Send Reply Advance

Replay

Erase Call Back/Reply Save

Cancel Help Skip

Forward

Section 3: Using PCS Service Features

3A: The Basics 81

Voicemail Options

Your PCS Phone offers several options for organizing and

accessing your voicemail.

Using Expert Mode

Using the Expert Mode setting for your personal voicemail box

helps you navigate through the voicemail system more quickly

by shortening the voice prompts you hear at each level.

To turn Expert Mode on or off:

1. Press and hold

voicemail box contains any new or saved messages,

press to access the main voicemail menu.

to access your voicemail. If your

2. Following the system prompts, press

to change your

Personal Options.

3. Press

for Expert Mode.

4. Press

to turn Expert Mode on or off.

Setting Up Group Distribution Lists

Create up to 20 separate group lists, each with up to

50 customers.

1. Press and hold

to access your voicemail.

2. Following the system prompts, press

to change your

Personal Options.

3. Press

for Administrative Options.

for Group Distribution Lists.

4. Press

5. Follow the voice prompts to create, edit, rename or delete

group lists.

PCS Callback

Return a call after listening to a message without disconnecting

from voicemail.

1. After listening to a message, press

2. Enter the phone number.

3. Once the call is complete, you’re returned to the voicemail

main menu.

Section 3: Using PCS Service Features

82 3A: The Basics

Voicemail-to-Voicemail Message

Record and send a voice message to other PCS Voicemail users.

1. From the main voicemail menu, press

to send a message.

2. Follow the voice prompts to enter the phone number.

3. Follow the voice prompts to record and send your voice

message.

Voicemail-to-Voicemail Message Reply

Reply to a voice message received from any other

PCS Voicemail user.

1. After listening to a voice message, press

2. Follow the voice prompts to record and send your reply.

Voicemail-to-Voicemail Message Forwarding

Forward a voice message, except those marked “Private,” to

other PCS Voicemail users.

1. After listening to a message, press

2. Follow the voice prompts to enter the phone number.

3. Follow the voice prompts to record your introduction and

forward the voice message.

Voicemail-to-Voicemail Receipt Request

Receive confirmation that your voice message has been listened

to when you send, forward or reply to other PCS users.

1. After you have recorded a message, press

to indicate

you are satisfied with the message you recorded.

2. Press

3. Press

to mark receipt requested.

to send your voicemail message.

Section 3: Using PCS Service Features

3A: The Basics 83

Continue Recording

Before pressing

message you recorded, press

Extended Absence Greeting

ᮣ

to indicate you are satisfied with the

to continue recording.

When your phone is turned off or you are off the enhanced

Sprint Nationwide PCS Network for an extended period, this

greeting can be played instead of your normal personal greeting.

1. From the main voicemail menu, press

for

Personal Options.

2. Press

for Greetings.

to record an Extended Absence Greeting.

3. Press

Clearing the Message Icon

Your phone may temporarily continue to display the message

icon after you have checked your voice and text messages.

To clear the icon from the display screen:

1. From the main menu, highlight Voicemail and press

2. Highlight Clear Count and press

3. A confirmation prompt will display. Highlight Yes and

press

Section 3: Using PCS Service Features

84 3A: The Basics

Voicemail Menu Key

Listen

Envelope Information

Send a Reply Message

Advance 8 Seconds

Rewind to Start

Forward Message

Erase Message

Callback/Place Call

Save Message

Send a Message

Personal Options

Notification Options

Phone Notification

Numeric Paging to a PCS Phone

Return to Personal Options Menu

Administrative Options

Skip Passcode

Autoplay

Message Date & Time On/Off

Change Passcode

Group Distribution List

Return to Personal Options Menu

Greetings

Personal Greetings

Recorded Name

Extended Absence Greeting

Return to Personal Options Menu

Place a Call

Exit Voicemail Menu

Section 3: Using PCS Service Features

3A: The Basics 85

PCS Messages

Now, through the enhanced Sprint Nationwide PCS Network,

you can receive numeric pages, Email, and Web-based Updates

on your PCS Phone.

Numeric Pages

Callers can send a numeric page to your phone when they

reach your voicemail box. Numeric paging to a PCS Phone is

included at no additional cost.

Note: The numeric paging option for your PCS Phone must be turned on

for your phone to receive pages. This option can be set by entering your

Voicemail menu Personal Options area. See “Voicemail Menu Key” on

page 85 for more information.

Email messages may be sent to your PCS Phone from anywhere

using your phone number plus “@messaging.sprintpcs.com.”

(For example, [email protected].)

Updates

Web-based text Updates can be automatically sent to your

phone from various popular Web sites. To have Updates sent to

your PCS Phone, see “Signing Up for Updates” on page 86.

Signing Up for Updates

With Updates, you can have Web-based news and information

sent directly to your phone at the times you choose.

To select the information you want sent to your PCS Phone:

1. From your computer, log on to the Internet.

2. Go to the site from which you want to receive information.

A few of the sites you can visit are America Online^®,

Yahoo!^®, MSN^®, and eBay^®. (The location where you request

updates within each site will vary.)

3. Where indicated on the site, enter your 10-digit PCS Phone

Number followed by “@messaging.sprintpcs.com.” (For

example, [email protected].)

Upon completing the registration process, you should begin

receiving Updates on your PCS Phone as requested.

Section 3: Using PCS Service Features

86 3A: The Basics

Message Notification

There are several ways your PCS Phone alerts you of

new messages:

ᮣ

By displaying the alert, “New Message,” on the screen.

By sounding the assigned ringer type.

By the LED blinking red.

By displaying

at the top of the screen.

Receiving New Messages

When you receive a new numeric page, Email, or Update, your

phone displays the alert “New Message” along with the date

and time the message arrived.

To select an option, highlight it and press

ᮣ

View to display the new message. The sender information,

phone number (if numeric page), subject (if Email), and

message will display. Press to display message options.

ᮣ

Ignore to return to the phone’s main menu. The new

message will be saved in the appropriate location in the

Messages menu.

Viewing Saved Messages

To view saved numeric pages, Emails, and Updates:

1. From the main menu, highlight Messages and press

2. Highlight Page/Text or a folder name and press

3. Highlight the message you wish to display and press

Unread messages will be marked with an asterisk (*).

Storing Messages

Your PCS Phone can store up to 50 messages. When message

memory is 90% full, a warning displays in the messages menu.

(To delete stored messages, see “Message Options” on page 88.)

When your phone reaches its message capacity, it automatically

deletes the oldest messages as new messages arrive.

Note: Unread and locked messages will not be automatically deleted

when messages capacity has been reached. If your phone has a combined

50 unread and locked messages, any new text messages will be returned

without notification.

Section 3: Using PCS Service Features

3A: The Basics 87

Message Options

After displaying a numeric page, Email, or Update, press

display the options menu.

To select an option, highlight it and press

ᮣ

Extract Number to extract a phone number from a message.

(See “Extracting Phone Numbers From a Message” on

page 88.)

ᮣ

Extract E-Mail to extract an email address. (See “Extracting

Email Addresses From a Message” on page 89.)

ᮣ

Erase to delete the message.

Create Folder to create a new folder to store the message.

(See “Creating Folders for Messages” on page 90.)

ᮣ

Lock Message to save the message from being deleted when

the maximum number of stored messages has been

reached. (Locked messages display an “@” symbol before

the message.)

ᮣ

Read Again to display the message.

Exit to return to the main menu.

Extracting Phone Numbers From a Message

After you display a message, press

message options.

to display

To extract a phone number contained in the message:

1. Highlight Extract Number and press

. All the phone

numbers contained in the message are displayed. (If there

are no phone numbers to extract from the message, the

following message displays: “There is nothing to extract.”)

2. Highlight the number you wish to extract and press

3. To select an option, highlight it and press

ᮣ

Call to dial the phone number.

ᮣ

Save to save the phone number in your Internal Phone

Book. (See “Internal Phone Book Entry Options” on

page 59.)

ᮣ

Next Number to display the next phone number contained

in the message (if applicable).

Section 3: Using PCS Service Features

88 3A: The Basics

ᮣ

Prepend to add numbers to the beginning of the phone

number. (See “Prepending a Phone Number From a

Message” on page 89.)

Exit to return to the main menu.

Prepending a Phone Number From a Message

After you display a message, press

message options.

to display

If you happen to be outside your local area code and need to

add a prefix to a phone number:

1. Highlight Prepend and press

2. Enter the digits or pauses (see below) you want to add to

the number. If you want to save the number, select the Save

option. If not, the changes only apply to the current call.

3. To select an option, highlight it and press

ᮣ

Call to dial the phone number.

Save to store the phone number in your Internal Phone Book.

Hard Pause to insert a hard pause. (See “Dialing and Saving

Phone Numbers With Pauses” on page 23.)

ᮣ

2-Second Pause to insert a 2-second pause. (See “Dialing and

Saving Phone Numbers With Pauses” on page 23.)

ᮣ

Exit to return to the previous screen.

Extracting Email Addresses From a Message

To extract an e-mail address contained in a message:

1. When the Message options are displayed, highlight Extract

E-Mail and press

. All the email addresses contained in

the message are displayed.

2. Highlight the address you want to extract and press

3. To select an option, highlight it and press

ᮣ

Save to save the e-mail address to an already existing

Internal Phone Book entry.

Next E-Mail to display the next e-mail address contained in

the message (if applicable).

Exit to return to the main menu.

Section 3: Using PCS Service Features

3A: The Basics 89

Creating Folders for Messages

You can create up to ten folders to store your messages.

1. From the main menu, highlight Messages and press

2. Highlight Edit Folder and press

3. Highlight Create Folder and press

4. Enter a keyword for the folder and press

. (See

“Entering Text” on page 25.) Incoming messages are

automatically filtered into the folder if they contain the

keyword you enter.

Note: You must enter a Keyword when creating a folder.

5. Enter a folder name and press

6. Highlight the ringer type you want to have alert you when a

message arrives in the folder and press . You will hear

previews of the ringers as you highlight them.

Note: You can also create a folder from the Message Options page. (See

“Message Options” on page 88.)

Editing Message Folders

To edit a folder:

1. From the main menu, highlight Messages and press

2. Highlight Edit Folder and press

3. Highlight the folder you wish to edit and press

4. To select an option, highlight it and press

ᮣ

Keyword to change the folder’s keyword. Incoming

messages are automatically filtered into the folder if they

contain the Keyword you enter.

ᮣ

Folder Name to change the folder’s name.

Ringer Type to change the ringer type that alerts you when a

new message arrives in the folder. You will hear previews

of the ringers as you highlight them.

ᮣ

Erase Folder to delete the folder and all its messages.

Exit to return to the main menu.

Section 3: Using PCS Service Features

90 3A: The Basics

Erasing All PCS Messages

To erase all saved numeric pages, Emails, and Updates:

1. From the main menu, highlight Messages and press

2. Highlight Erase All Msgs and press

3. A confirmation prompt will display. Highlight Yes and

press

Using Caller ID

Caller ID lets people know who’s calling by displaying the

number of the person calling.

To block your phone number from being displayed for a

specific outgoing call:

1. Press

2. Enter the number you want to call.

3. Press

To permanently block your number, call PCS Customer

Service Solutions.

Responding to Call Waiting

When you’re on a call, Call Waiting alerts you to incoming calls

by sounding a tone. Your phone’s screen informs you that

another call is coming in and displays the caller’s phone

number (if available) and Internal Phone Book entry name (if

the call is coming from a number in your Internal Phone Book).

To respond to an incoming call while you’re on a call:

ᮣ

Highlight Flash and press

hold and answers the second call. To switch between calls,

highlight Flash and press again.

. This puts the first caller on

To send the incoming call to voicemail, highlight Ignore and

press

Tip: For those calls where you don’t want to be interrupted, you can

temporarily disable Call Waiting by pressing

before placing

your call. Call Waiting is automatically reactivated once you end the call.

Section 3: Using PCS Service Features

3A: The Basics 91

Making a Three-Way Call

With Three-Way Calling, you can talk to two people at the same

time. When using this feature, the normal airtime rates will be

charged for each of the two calls.

1. Enter a number you wish to call and press

2. Once you have established the connection, highlight

Dial 3-Way Call and press to put the first call on hold.

3. Dial the second number you wish to call and press

4. When you’re connected to the second party, highlight Flash

and press . again to begin your three-way call.

If one of the people you called hangs up during your call, you

and the remaining caller stay connected. If you initiated the call

and are the first to hang up, all three callers are disconnected.

Tip: You can also begin a Three-Way Call by displaying a phone number

stored in your Internal Phone Book, Call History or Messaging. To call the

third party, display the desired number, highlight 3-way Call, and

press

Note: Call Waiting and Three-Way Calling are not available while roaming

off the enhanced Sprint Nationwide PCS Network.

Section 3: Using PCS Service Features

92 3A: The Basics

Using Call Forwarding

Call Forwarding lets you forward all your incoming calls to

another phone number – even when your phone is turned off.

You can continue to make calls from your phone when

Call Forwarding is activated. There is a per-call charge for calls

you have forwarded.

To Activate Call Forwarding

1. Press

2. Enter the area code and phone number to which your

future calls should be forwarded.

3. Press

. You will hear three short dial tones to confirm

the activation of Call Forwarding.

To Deactivate Call Forwarding

1. Press

2. Press

. You will hear three short dial tones to confirm

the deactivation.

Note: You are charged a higher rate for calls you have forwarded.

Section 3: Using PCS Service Features

3A: The Basics 93

Section 3B

PCS Voice Command

In This Section

ᮣ

Getting Started with PCS Voice Command^SM

Creating Your Own Address Book

Making a Call with PCS Voice Commant

Accessing Information Using PCS Voice Command

ith Sprint, the first wireless provider to offer innovative

_{PCS Voice Command technology, reaching your friends,}

family, and co-workers has never been easier – especially when

you’re on the go. You can even listen to Web-based information

such as news, stock quotes, weather, sports, and much more.

Your voice does it all with PCS Voice Command.

Section 3: Using PCS Service Features

3B: PCS Voice Command 95

Getting Started With PCS Voice Command

With PCS Voice Command:

ᮣ

You can store all your contacts’ phone numbers, so you can

simply say the name of the person you want to call.

There’s no need to punch in a lot of numbers, memorize

voicemail passwords, or try to dial while you’re driving.

You can call anyone in your address book – even if you

don’t remember their phone number.

It’s Easy to Get Started

Just dial

from your PCS Phone to activate the service

and listen to brief instructions directly from your phone. There

is a monthly charge for PCS Voice Command.

Creating Your Own Address Book

You can program up to 500 names into your personal address

book, with each name having up to five phone numbers. That’s

2,500 phone numbers – and with the advanced technology of

PCS Voice Command – you can have instant access to all of them.

There are four ways to update your address book:

ᮣ

Use Voice Recordings: Simply dial

and say, “Add

name.” You will then be asked to say the name and number

you want to add to your personal address book. Your address

book can store up to 20 voice recorded names at once.

ᮣ

On the Web: Go to www.talk.sprintpcs.com and receive a fully

functional Web-based address book to create and update

your contacts.

Use an Existing Address Book: Automatically merge address

books from desktop software applications with Sprint Sync^SM

Services for no additional charge. Simply click on the “Click

to synchronize” button within your PCS Voice Command

personal address book at www.talk.sprintpcs.com.

ᮣ

Call Directory Assistance: If you don’t have a computer or

Internet access handy, you can have PCS Directory

Assistance look up phone numbers for you and

automatically add them to your address book. Just say “Call

operator” and we’ll add two names and numbers to your

address book for our standard directory assistance charge.

Section 3: Using PCS Service Features

96 3B: PCS Voice Command

Making a Call With PCS Voice Command

1. Once you’ve signed up for PCS Voice Command and created

your address book, all you do is press

.. You’ll hear

a tone followed by the prompt “Ready.”

2. After the “Ready” prompt, simply say, in a natural voice,

“Call” and the name of the person or the number you’d like

to call. For example, you can say, “Call Jane Smith at work,”

“Call John Baker on the mobile phone,” “Call 555-1234,” or

“Call Bob Miller.”

3. Your request will be repeated and you will be asked to

verify. Say “Yes” to call the number or person. Say “No” if

you wish to cancel.

4. The number will automatically be dialed. Keep in mind that

PCS Voice Command recognizes not only your voice, but

any voice, so that others can experience the same

convenience if they use your phone.

For more helpful hints on PCS Voice Command, including a list

of recognized commands and an interactive tutorial, visit

www.talk.sprintpcs.com.

Accessing Information Using

PCS Voice Command

1. Press

2. Say “Call the Web.” (To access, listen to and respond to

email, once email has been set up, say “Call My Email.”)

3. Choose from a listing of information categories like news,

weather, sports, and more.

Note: PCS Voice Command is not available while roaming off the

enhanced Sprint Nationwide PCS Network.

Section 3: Using PCS Service Features

3B: PCS Voice Command 97

Section 4

Safety Guidelines and

Warranty Information

Section 4

Safety Guidelines and Warranty Information 99

100

Section 4A

Safety

In This Section

ᮣ

Getting the Most Out of Your Reception

Maintaining Safe Use of and Access to Your Phone

Caring for the Battery

Acknowledging Special Precautions and the FCC Notice

Consumer Information on Wireless Phones

art of getting the most out of your PCS Phone is learning how

_{the phone works and how to care for it. This section outlines}

performance and safety guidelines that help you understand the

basic features of your phone’s operation.

Section 4: Safety Guidelines and Warranty Information

4A: Safety 101

Getting the Most Out of Your Reception

Keeping Tabs on Signal Strength

The quality of each call you make or receive depends on the

signal strength in your area. Your phone informs you of the

current signal strength by displaying a number of bars next to

the signal strength icon. The more bars displayed, the stronger

the signal. If you’re inside a building, being near a window may

give you better reception.

Understanding the Power Save Feature

If your phone is unable to find a signal after 15 minutes of

searching, a Power Save feature is automatically activated. If your

phone is active, it periodically rechecks service availability or

you can check it yourself by pressing any key. Anytime the

Power Save feature is activated, a message displays on the screen.

When a signal is found, your phone returns to standby mode.

Understanding How Your Phone Operates

Your phone is basically a radio transmitter and receiver. When

it’s turned on, it receives and transmits radiofrequency (RF)

signals. When you use your phone, the system handling your

call controls the power level. This power can range from 0.006

watts to 0.2 watts in digital mode.

Knowing Radiofrequency Safety

The design of your PCS Phone complies with updated NCRP

standards described below.

In 1991-92, the Institute of Electrical and Electronics Engineers

(IEEE) and the American National Standards Institute (ANSI)

joined in updating ANSI’s 1982 standard for safety levels with

respect to human exposure to RF signals. More than 120

scientists, engineers and physicians from universities,

government health agencies and industries developed this

updated standard after reviewing the available body of research.

In 1993, the Federal Communications Commission (FCC)

adopted this updated standard in a regulation. In August 1996,

the FCC adopted hybrid standard consisting of the existing

ANSI/IEEE standard and the guidelines published by the

National Council of Radiation Protection and Measurements

(NCRP).

Section 4: Safety Guidelines and Warranty Information

102 4A: Safety

Maintaining Your Phone’s Peak Performance

There are several simple guidelines to operating your phone

properly and maintaining safe, satisfactory service.

ᮣ

Hold the phone with the antenna raised, fully-extended, and

over your shoulder.

ᮣ

Try not to hold, bend, or twist the phone’s antenna.

Don’t use the phone if the antenna is damaged.

Speak directly into the mouthpiece.

Avoid exposing your phone and accessories to rain or liquid

spills. If your phone does get wet, immediately turn the

power off and remove the battery. If it’s inoperable, return

it to a Sprint Store or call PCS Customer Service Solutions^SM

for service.

Note: For the best care of your phone, only Sprint authorized personnel

should service your phone and accessories. Faulty service may void

the warranty.

Maintaining Safe Use of and Access to

Your Phone

FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY

LEAD TO SERIOUS PERSONAL INJURY AND POSSIBLE

PROPERTY DAMAGE

Using Your Phone While Driving

Talking on your phone while driving (or operating the phone

without a hands-free device) is prohibited in some jurisdictions.

Laws vary as to specific restrictions. Remember that safety

always comes first.

When using your phone in the car:

ᮣ

Get to know your phone and its features, such as speed dial

and redial.

ᮣ

When available, use a hands-free device.

Position your phone within easy reach.

Let the person you are speaking to know you are driving; if

necessary, suspend the call in heavy traffic or hazardous

weather conditions.

Section 4: Safety Guidelines and Warranty Information

4A: Safety 103

ᮣ

Do not take notes or look up phone numbers while driving.

Dial sensibly and assess the traffic; if possible, place calls

when stationary or before pulling into traffic.

ᮣ

Do not engage in stressful or emotional conversations that

may divert your attention from the road.

Dial 911 to report serious emergencies. It’s free from your

wireless phone.

ᮣ

Use your phone to help others in emergencies.

Call roadside assistance or a special non-emergency wireless

number when necessary.

Tip: Purchase an optional hands-free car kit at your local Sprint Store.

You may also call the PCS Accessory Hotline at 1-800-974-2221 or by

dialing

on your PCS Phone.

Following Safety Guidelines

To operate your phone safely and efficiently, always follow

any special regulations in a given area. Turn your phone off in

areas where use is forbidden or when it may cause interference

or danger.

Using Your Phone Near Other Electronic Devices

Most modern electronic equipment is shielded from

radiofrequency (RF) signals. However, RF signals from wireless

phones may affect inadequately shielded electronic equipment.

RF signals may affect improperly installed or inadequately

shielded electronic operating systems and/or entertainment

systems in motor vehicles. Check with the manufacturer or

their representative to determine if these systems are

adequately shielded from external RF signals. Also check with

the manufacturer regarding any equipment that has been added

to your vehicle.

Consult the manufacturer of any personal medical devices, such

as pacemakers and hearing aids, to determine if they are

adequately shielded from external RF signals.

Note: Always turn off the phone in health care facilities and request

permission before using the phone near medical equipment.

Section 4: Safety Guidelines and Warranty Information

104 4A: Safety

Turning Off Your Phone Before Flying

Turn off your phone before boarding any aircraft. To prevent

possible interference with aircraft systems, the U.S. Federal

Aviation Administration (FAA) regulations require you to have

permission from a crew member to use your phone while the

plane is on the ground. To prevent any risk of interference,

FCC regulations prohibit using your phone while the plane is in

the air.

Turning Off Your Phone in Dangerous Areas

To avoid interfering with blasting operations, turn off your

phone when in a blasting area or in other areas with signs

indicating that two-way radios should be turned off.

Construction crews often use remote-control RF devices to

set off explosives.

Turn off your phone when you’re in any area that has a

potentially explosive atmosphere. Although it’s rare, your

phone or its accessories could generate sparks. Sparks could

cause an explosion or a fire resulting in bodily injury or even

death. These areas are often, but not always, clearly marked.

They include:

ᮣ

Fueling areas such as gas stations.

Below deck on boats.

Fuel or chemical transfer or storage facilities.

Areas where the air contains chemicals or particles such as

grain, just or metal powders.

ᮣ

Any other area where you would normally be advised to

turn off your vehicle’s engine.

Note: Never transport or store flammable gas, liquid or explosives in the

compartment of your vehicle that contains your phone or accessories.

Restricting Children’s Access to your Phone

Your PCS Phone is not a toy. Children should not be allowed to

play with it because they could hurt themselves and others,

damage the phone or make calls that increase your phone bill.

Section 4: Safety Guidelines and Warranty Information

4A: Safety 105

Caring for the Battery

Protecting Your Battery

The guidelines listed below help you get the most out of your

battery’s performance.

ᮣ

Use only Sprint-approved batteries and desktop chargers.

These chargers are designed to maximize battery life. Using

other batteries or chargers voids your warranty and may

cause damage.

ᮣ

In order to avoid damage, charge the battery only in

temperatures that range from 32º F to 113º F (0º C to 45º C).

Don’t use the battery charger in direct sunlight or in high

humidity areas, such as the bathroom.

ᮣ

Never dispose of the battery by incineration.

Keep the metal contacts on top of the battery clean.

Don’t attempt to disassemble or short-circuit the battery.

The battery may need recharging if it has not been used for

a long period of time.

ᮣ

It’s best to replace the battery when it no longer provides

acceptable performance. It can be recharged hundreds of

times before it needs replacing.

Don’t store the battery in high temperature areas for long

periods of time. It’s best to follow these storage rules:

Less than one month:

4º F to 140º F (-20º C to 60º C)

More than one month:

4º F to 113º F (-20º C to 45º C)

Disposal of Lithium Ion (LiIon) Batteries

For safe disposal options of your LiIon batteries, contact your

nearest Sprint-authorized service center.

Special Note: Be sure to dispose of your battery properly. In

some areas, the disposal of batteries in household or business

trash may be prohibited.

Note: For safety, do not handle a damaged or leaking LiIon battery.

Section 4: Safety Guidelines and Warranty Information

106 4A: Safety

Acknowledging Special Precautions and the

FCC Notice

The phone may cause TV or radio interference if used in close

proximity to receiving equipment. The FCC can require you to

stop using the phone if such interference cannot be eliminated.

Vehicles using liquefied petroleum gas (such as propane or

butane) must comply with the National Fire Protection

Standard (NFPA-58). For a copy of this standard, contact the

National Fire Protection Association, One Batterymarch Park,

Quincy, MA 02269, Attn: Publication Sales Division.

Cautions

Any changes or modifications to your phone not expressly

approved in this document could void your warranty for this

equipment, and void your authority to operate this equipment.

Only use approved batteries, antennas and chargers. The use of

any unauthorized accessories may be dangerous and void the

phone warranty if said accessories cause damage or a defect to

the phone.

Although your phone is quite sturdy, it is a complex piece of

equipment and can be broken. Avoid dropping, hitting,

bending or sitting on it.

Body-Worn Operation

To maintain compliance with FCC RF exposure guidelines, if

you wear a handset on your body, use the Sprint supplied or

approved carrying case, holster or other body-worn accessory.

If you do not use a body-worn accessory, ensure that the

antenna is at least 7/16 inch (1.5 centimeters) from your body

when transmitting. Use of non-Sprint approved accessories may

violate FCC RF exposure guidelines.

For more information about RF exposure, please visit the FCC

Web site at www.fcc.go v.

Section 4: Safety Guidelines and Warranty Information

4A: Safety 107

Specific Absorption Rates (SAR) for Wireless Phones

The SAR is a value that corresponds to the relative amount of RF

energy absorbed in the head of a user of a wireless handset.

The SAR value of a phone is the result of an extensive testing,

measuring and calculation process. It does not represent how

much RF the phone emits. All phone models are tested at their

highest value in strict laboratory settings. But when in

operation, the SAR of a phone can be substantially less than the

level reported to the FCC. This is because of a variety of factors

including its proximity to a base station antenna, phone design

and other factors. What is important to remember is that each

phone meets strict federal guidelines. Variations in SARs do not

represent a variation in safety.

All phones must meet the federal standard, which incorporates

a substantial margin of safety. As stated above, variations in

SAR values between different model phones do not mean

variations in safety. SAR values at or below the federal standard

of 1.6 W/kg are considered safe for use by the public.

The highest reported SAR values of the 1200 are:

PCS mode (Part 24E) - Head: 0.830 W/kg; Body-worn: 0.304 W/kg

FCC Radiofrequency Emission

This phone meets the FCC Radiofrequency Emission

Guidelines. FCC ID number: BEJLX1200. More information on

the phone's SAR can be found from the following FCC Web site:

http://www.fcc.gov/oet/fccid.

Section 4: Safety Guidelines and Warranty Information

108 4A: Safety

Owner’s Record

The model number, regulatory number and serial number are

located on a nameplate inside the battery compartment. Record

the serial number in the space provided below. This will be

helpful if you need to contact us about your phone in the future.

Model: PCS Phone by LG^®(1200)

Serial No.:

User Guide Proprietary Notice

CDMA Technology is licensed by QUALCOMM Incorporated

under one or more of the following patents:

4,901,307 5,109,390 5,267,262 5,416,797

5,506,865 5,544,196 5,657,420 5,101,501

5,267,261 5,414,796 5,504,773 5,535,239

5,600,754 5,778,338 5,228,054 5,337,338

5,710,784 5,056,109 5,568,483 5,659,569

5,490,165 5,511,073

T9 Text Input is licensed by Tegic Communications and is

covered by U.S. Pat. 5,818,437, U.S. Pat. 5,953,541, U.S. Pat.

6,011,554 and other patents pending.

Section 4: Safety Guidelines and Warranty Information

4A: Safety 109

110

Section 4B

Manufacturer’s Warranty

In This Section

ᮣ

Manufacturer’s Warranty

his section contains the manufacturer’s warranty for your

_{PCS Phone.}

For information about the Terms and Conditions of your

PCS Service, please see the Start Here guide included with your

phone. For the most recent version of the Terms and Conditions,

please visit www.sprintpcs.com.

Section 4: Safety Guidelines and Warranty Information

4B: Manufacturer’s Warranty 111

Manufacturer’s Warranty

Customer Limited Warranty

SPRINT SPECTRUM, L.P., (Sprint) offers you a limited warranty

that the enclosed subscriber unit (Product), including

accessories in the product package, will be free from defects in

material or workmanship as follows:

1. SUBSCRIBER UNIT

A. SPRINT ONE (1) YEAR LIMITED WARRANTY. For a period

of one (1) year from the date of purchase, Sprint will, at its

option, either pay the parts and labor charges to any authorized

PCS Phone service facility to repair or replace a defective Product

(with new or rebuilt parts/replacements). After this one (1) year

period, you must pay all parts, shipping and labor charges.

B. REPAIRS: For a period equal to the remainder of the

original limited warranty period on an original Product or

for the 180 days after the date of repair/replacement,

whichever is longer, Sprint will repair or replace (with new or

rebuilt replacements) defective parts or Product used in the

repair or replacement of the original Product under this

Limited Warranty.

Proof of purchase in the form of a bill of sale or receipted

invoice or warranty repair document which is evidence that the

Product is within the warranty period must be presented to

obtain warranty service. This limited warranty is not

transferable to any third party, including but not limited to any

subsequent purchaser or owner of the Products. Transfer or

resale of a Product will automatically terminate warranty

coverage with respect to the Products.

This limited warranty does not cover and is void with respect to

the following: (i) Products which have been improperly

installed, repaired, maintained or modified (including the

antenna); (ii) Products which have been subjected to misuse

(including Products used in conjunction with hardware

electrically or mechanically incompatible or used with

accessories not supplied by Sprint), abuse, accident, physical

damage, abnormal operation, improper handling and storage,

neglect, exposure to fire, water or excessive moisture or

dampness or extreme changes in climate or temperature; (iii)

Products operated outside published maximum ratings; (iv)

Section 4: Safety Guidelines and Warranty Information

112 4B: Manufacturer’s Warranty

cosmetic damage; (v) Products on which warranty stickers or

Product serial numbers have been removed, altered, or

rendered illegible; (vi) customer instruction: (vii) cost of

installation, removal or reinstallation; (viii) signal reception

problems (unless caused by defect in material and

workmanship): (ix) damage the result of fire, flood, acts of God

or other acts which are not to the fault of Sprint and which the

Product is not specified to tolerate, including damage caused by

mishandling and blown fuses; (x) consumables (such as fuses);

or (xi) any Products which have been opened, repaired,

modified or altered by anyone other than Sprint or a PCS

Authorized Service Center.

This warranty does not cover customer education, instruction,

installation, set up adjustments, or signal reception problems.

This warranty is valid only in the United States.

USE WITH ACCESSORIES NOT SUPPLIED BY SPRINT OR

OTHERWISE NOT EXPRESSLY AUTHORIZED BY SPRINT MAY

BE DANGEROUS.

SPRINT SPECIFICALLY DISCLAIMS LIABILITY, AND SHALL

HAVE NO OBLIGATION TO PROVIDE TO BUYER ANY OTHER

REMEDY, FOR ANY AND ALL DIRECT, INDIRECT, SPECIAL,

GENERAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES,

INCLUDING, BUT NOT LIMITED TO LOSS OF PROFITS, LOSS

OF SALES, LOSS OF USE OF THE PRODUCT, OR ANTICIPATED

PROFITS ARISING OUT OF USE OF OR INABILITY TO USE ANY

PRODUCT (FOR EXAMPLE, WASTED AIRTIME CHARGES DUE

TO THE MALFUNCTION OF A PRODUCT), DAMAGE DUE TO

IMPROPER OPERATION OR MAINTENANCE, INSTALLATION,

CONNECTION TO IMPROPER VOLTAGE SUPPLY, OR

ATTEMPTED REPAIR OF THE PRODUCT BY ANYONE OTHER

THAN A FACILITY AUTHORIZED BY SPRINT. THIS WARRANTY

DOES NOT COVER PRODUCTS SOLD AS IS OR WITH ALL

FAULTS, OR CONSUMABLES, (SUCH AS FUSES). THIS

WARRANTY DOES NOT APPLY WHEN THE MALFUNCTION

RESULTS FROM USE OF THE PRODUCT IN CONJUNCTION

WITH ACCESSORIES, PRODUCTS OR ANCILLARY OR

PERIPHERAL EQUIPMENT NOT SUPPLIED BY OR EXPRESSLY

AUTHORIZED FOR USE BY SPRINT, AND WHERE IT IS

DETERMINED BY SPRINT THAT THERE IS NO FAULT WITH

THE PRODUCT ITSELF.

Section 4: Safety Guidelines and Warranty Information

4B: Manufacturer’s Warranty 113

REPAIR OR REPLACEMENT, AS PROVIDED BY THE

WARRANTY, IS YOUR SOLE AND EXCLUSIVE REMEDY FOR

BREACH OF THE LIMITED WARRANTY. TO THE EXTENT

PERMITTED BY APPLICABLE LAW, SPRINT MAKES NO OTHER

WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, WITH

RESPECT TO THE PRODUCTS FOR A PARTICULAR PURPOSE

OR AGAINST INFRINGEMENT WITHIN THE TIME PERIOD

SPECIFIED IN THE LIMITED WARRANTY OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR

PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO

THE DURATION OF THIS WARRANTY.

Some States do not allow the exclusion or limitation of

incidental or consequential damages, or allow limitations on

how long an implied warranty lasts, so the above limitations or

exclusions may not apply to you.

This limited warranty gives you specific legal rights, and you

may also have other rights which vary from State to State.

For other Warranty Service Information, please call PCS

CUSTOMER SERVICE SOLUTIONS at 1-888-211-4727.

Section 4: Safety Guidelines and Warranty Information

114 4B: Manufacturer’s Warranty

prior written approval. Sprint and the diamond logo are trademarks of Sprint Communications Company

L.P. All other trademarks are property of their respective owners.

Index

Entering Text

ABC Mode 27

Selecting a Character Input

Mode 25

Symbols, Numbers, and

Smileys 27

T9 Text Input 26

AC Adapter Charger 16

Battery

Getting Started With

Internal Phone Book

Calling a Number From 24

Call History

Making a Call From 53

Options 52

Saving a Phone Number

From 54

Location Settings 36

Locking Your Phone 40

Manufacturer’s Warranty 112

Menus

Diagram 49

Navigation 48

Structure 48

Customer Service Solutions 6

Dialing Options 19

Directory Assistance 6

Display Screen Symbols 12

Display Settings 33–35

Viewing 49

Missed Call Notification 18

Index 117

Navigating Menus 48

Unlocking Your Phone 4, 40

Updates

PCS Services

Voicemail

Customer Service Solutions 6

Directory Assistance 6

Operator Services 6

PCS Voice Command 95–97

Phone Number

Phone Numbers

Resetting Your Phone 42

Ringer Types 31

Roaming

Other Digital Networks 44

Setting Up Your Voicemail 5

Turning Your Phone On and Off 14

118 Index

National Instruments Computer Accessories 321518A 01 User Manual
Motorola DEFY 3449 User Manual
Kompernass KH 2201 User Manual
Keurig Inc Coffeemaker B3000 User Manual
Kenwood KDC MP6090R User Manual
Kenwood eXcelon KDC X569 User Manual
JVC Computer Drive VR D0U User Manual
HP Hewlett Packard A165890669 User Manual
APC Net Shelter AR8442 User Manual
Addonics Technologies 18" MSATA ADAPTER ADMS18SA User Manual