Motorola i856 H74XAN6JR7AN User Manual

i856  
User’s Guide  
Class B Digital Device  
DECLARATION OF CONFORMITY  
Per FCC CFR 47 Part 2 Section 2.1077(a)  
As a personal computer peripheral, this device complies with part 15 of  
the FCC Rules. Operation is subject to the following two conditions: (1)  
This device may not cause harmful interference, and (2) this device must  
accept any interference received, including interference that may cause  
undesired operation. See 47 CFR Sec. 15.19(3).  
Note: This equipment has been tested and found to comply with the limits for  
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are  
designed to provide reasonable protection against harmful interference in a  
residential installation. This equipment generates, uses and can radiate radio  
frequency energy and, if not installed and used in accordance with the  
instructions, may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a particular  
installation.  
Responsible Party Name: Motorola, Inc.  
Address: 8000 West Sunrise Boulevard  
Plantation, FL 33322 USA  
Phone Number: 1 (800) 453-0920  
Hereby declares that the product:  
Product Name: i856  
If this equipment does cause harmful interference to radio or television  
reception, which can be determined by turning the equipment off and on,  
the user is encouraged to try to correct the interference by one or more of  
the following measures:  
Model Number: H74XAN6JR7AN  
FCC-ID: IHDT56KC1  
Conforms to the following regulations:  
FCC Part 15, subpart B, section 15.107(a), 15.107(d) and section 15.109(a)  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from  
that to which the receiver is connected.  
FCC Notice to Users  
The following statement applies to all products that have  
received FCC approval. Applicable products bear the FCC logo,  
and/or an FCC ID in the format FCC-ID: IHDT56KC1 on the product  
label.  
Motorola has not approved any changes or modifications to this device by  
the user. Any changes or modifications could void the user’s authority to  
operate the equipment. See 47 CFR Sec. 15.21.  
Consult the dealer or an experienced radio/TV technician for  
help.  
Industry Canada Notice to Users  
Operation is subject to the following two conditions: (1) This device may  
not cause interference and (2) This device must accept any interference,  
including interference that may cause undesired operation of the device.  
See RSS-GEN 7.1.5.  
Motorola, Inc.  
Consumer Advocacy Office  
600 North US Highway 45  
Libertyville, IL 60048  
www.hellomoto.com  
Note: Do not ship your phone to the above address. If you need to  
return your phone for repairs, replacement, or warranty service,  
please contact the Motorola Customer Support Center at:  
1-800-453-0920 (United States)  
1-877-483-2840 (TTY/TDD United States for hearing impaired)  
Certain mobile phone features are dependent on the capabilities  
and settings of your service provider’s network. Additionally,  
certain features may not be activated by your service provider,  
and/or the provider's network settings may limit the feature’s  
functionality. Always contact your service provider about feature  
availability and functionality. All features, functionality, and other  
product specifications, as well as the information contained in this  
user's guide are based upon the latest available information and  
are believed to be accurate at the time of printing. Motorola  
reserves the right to change or modify any information or  
specifications without notice or obligation.  
MOTOROLA and the Stylized M Logo are registered in the US  
Patent & Trademark Office. All other product or service names are  
the property of their respective owners. Java and all other  
Java-based marks are trademarks or registered trademarks of Sun  
Microsystems, Inc. in the U.S. and other countries.  
© Motorola, Inc., 2009.  
Manual Number: NNTN7815A  
HELLOMOTO  
Introducing your new Motorola i856 wireless phone. Here’s a quick anatomy lesson.  
i856w  
Camera  
Key  
Right Soft Key  
Perform function  
in lower right  
display.  
Left Soft Key  
Perform function  
in lower left  
display.  
Ready  
Ready  
5/10/09  
5/10/09  
Menu Key  
From home screen,  
open main menu.  
End/Power Key  
End calls, exit  
menu system,  
turns phone  
on/off.  
Speaker Key  
Volume Keys  
PTT Button  
Contcs  
Mesgs  
Contcs  
Mesgs  
OK / Play Key  
Talk Key/Recent Call  
Make &  
Music Key  
answer calls.  
Activates Music  
Player.  
3.5 mm Audio Jack  
Micro USB Connector  
Connects charger and  
accessories.  
4-Way Navigation Key  
1
 
check it out  
1
Ready  
Press and hold the  
Power Key for a  
few seconds, or until  
the screen lights up,  
to turn on your phone.  
5/10/09  
3
Press the Navigation key  
up, down, left or right  
to highlight a menu feature.  
Contcs  
Mesgs  
2
Customizable rkey  
that can be used  
to open the  
4
Settings screen.  
Press the rkey  
to select.  
2
 
contents  
check it out . . . . . . . . . . . 2  
menu map. . . . . . . . . . . . 5  
use and care . . . . . . . . . . 7  
call a stored phone  
finding your phone  
features for the hearing  
main attractions . . . . . . 46  
my music . . . . . . . . . . 50  
Bluetooth® . . . . . . . . . 74  
basics. . . . . . . . . . . . . . . 36  
volume . . . . . . . . . . . . 41  
essentials . . . . . . . . . . . . 8  
SIM card. . . . . . . . . . . . 9  
microSD memory card . 9  
store a phone number or  
call features. . . . . . . . . . 78  
contents  
3
customize. . . . . . . . . . . . 83  
hide or show location  
RF Energy Interference/  
Caring for the  
91  
Open Source Software  
Export Law Assurances. .  
Specific Absorption Rate.  
Hearing Aid Compatibility  
Information From the  
103  
Wireless: The New  
California Perchlorate  
Patent and Trademark  
Software Copyright Notice  
Privacy and Data Security  
Smart Practices While  
Legal and Safety . . . . . . 88  
Safety and General  
Operational Precautions .  
AGPS and Emergency  
Motorola Limited  
States and Canada. . . . 98  
index. . . . . . . . . . . . . . . 107  
contents  
4
menu map  
main menu  
B
L
Recent Calls  
T
Games and Apps  
Alarm Clock Plus  
Bluetooth  
Buy More  
Contacts  
Audio Devices  
Pair to Devices  
Device History  
Setup  
Alarm Clock Plus  
My Images  
[New Contact]  
Audio Player  
My Videos  
Java System  
Memory Card  
E
Messages  
[Create Message]  
Find Me  
Voice Mail  
Inbox  
GPS  
Position  
Privacy  
Drafts  
C
Tools  
Outbox  
My Info  
Interface  
Sent Items  
Net Alert  
My Name  
Line 1  
Datebook  
[New Event]  
Private ID1  
Private ID2  
Carrier IP  
1
j
Web  
Call Timers  
Last Call  
Multimedia  
Phone Reset  
IP1 Address  
IP2 Address  
Phone Lifetime  
Prvt/Grp Reset  
Prvt/Grp Lifetime  
Kbytes Reset  
Media Center  
My Images  
My Music  
My Videos  
Camera  
Profiles  
[New Profile]  
Standard  
Car  
Memo  
Camcorder  
Ring Tones  
VoiceRecord  
u
Settings (see next page)  
Meeting  
Office  
Outdoors  
Headset  
PRVT Only  
CNTCS Only  
This is the standard main menu layout. Your  
phones menu may be a little different.  
S
Push To Talk  
Call Alert  
PT Manager  
Quick PTT  
PTT Options  
5
 
settings menu  
Display/Info  
Slide Activation  
Minute Beep  
Call Duration  
TTY  
Hearing Aid  
Notifications  
DTMF Dialing  
Call Forward  
Prepend  
Memory Card  
Wallpaper  
Remove Card  
[Buy More]  
Store Media  
Format Card  
Help  
Auto Cycle  
Wallpaper  
Text Size  
Theme  
Security  
Phone Lock  
Home Icons  
Backlight  
Keypad Lock  
SIM PIN  
Timer  
Personalize  
GPS PIN  
Change Passwords  
Java Timer  
PTT Backlight  
Reorder Menu  
Shortcuts  
Up Key  
Advanced  
Slide Close  
Alert Timeout  
Continue Task  
Down Key  
Left Key  
Headset/Spkr  
Connectivity  
Reset Defaults  
Return to Home  
Transmitters  
Phone Only  
End Task  
Clock  
Right Key  
Center Key  
Left Softkey  
Right Softkey  
Power Up  
Display  
Time Format  
Date Format  
Year  
Menu View  
Connections  
Volume  
Icon View  
List View  
Tab View  
Bluetooth  
Ringers/Alerts  
USB  
Speaker  
Earpiece  
Multimedia  
Keypad  
Memory Card Access  
Data Modem  
Application Access  
Help  
Large Dialing  
Language  
Phone Calls  
Voice Playback  
Set Line  
Speak Text  
Any Key Ans  
Auto Redial  
Call Waiting  
Auto Ans  
Speak Caller  
Voice  
Multimedia Volume  
6
use and care  
Use and Care  
To care for your Motorola phone, please keep it away from:  
liquids of any kind  
dust and dirt  
Don’t expose your phone to water, rain,  
extreme humidity, sweat, or other  
moisture. If it does get wet, don’t try to  
accelerate drying with the use of an  
oven or dryer, as this may damage the  
phone.  
Don’t expose your phone to dust, dirt,  
sand, food, or other inappropriate  
materials.  
extreme heat or cold  
cleaning solutions  
To clean your phone, use only a dry soft  
cloth. Don’t use alcohol or other  
cleaning solutions.  
Avoid temperatures below 0°C/32°F or  
above 45°C/113°F  
.
microwaves  
the ground  
Don’t try to dry your phone in a  
microwave oven.  
Don’t drop your phone.  
7
 
essentials  
Caution: Before using the phone for the first  
time, read the Important Safety and Legal  
information included in the gray-edged pages  
at the back of this guide.  
2
Press the navigation keys  
Phone Calls, and press the center key  
select it.  
;
to scroll to  
r
to  
symbols  
This means a feature is network or  
subscription dependent and may  
not be available in all areas, or might  
not be offered by your service  
provider. Contact customer service  
for more information.  
about this guide  
This guide shows how to locate and access  
menu feature as follows:  
Find it:  
/
>
u
>
Phone Calls  
This means that, from the home screen:  
This means a feature requires an  
optional accessory.  
1
8
Press the menu key  
the Settings menu option  
/
and then press  
u.  
essentials  
     
SIM card  
microSD memory  
card  
Your handset may come with a memory card,  
memory card adapter, and memory card  
reader1.  
insert the SIM card  
A memory card is removable flash memory  
you can use to store pictures, videos, and  
audio files(music and podcast).  
You can connect your phone using a  
Motorola data cable directly to your  
computer, access the memory card  
loaded in the phone to save or delete music,  
images, videos, or audio files.  
Find it:  
/
>
u
>
Connections > USB  
Warning: To avoid loss or damage, do not  
remove your SIM card from your phone  
unless absolutely necessary.  
1. Depending on your service provider, the memory card,  
memory card adapter, and memory card reader may not  
be included with your phone.  
essentials  
9
insert the memory card  
remove the memory card  
1
Remove the battery door, lift the black  
plastic indicator and slide the memory  
card in place. Return the battery cover  
when you are done.  
Warning: Do not remove the memory card  
before selecting the Remove Card option under  
Settings. Removing the memory card before  
selecting the Remove Card option could result in  
loss of data.  
1
2
3
From the home screen press />  
u
>
Memory Card > Remove Card  
.
Once the handset confirms it is safe to  
remove the SD card, press  
-
under OK.  
Remove the battery door.  
Note: The first time you insert a memory card  
in your phone, you will see the following  
options: [Do Nothing] Go To Audio Player, Go To Camera,  
,
and Go To Media Center. Select the option of your  
choice and continue.  
essentials  
10  
   
4
Lift the black plastic indicator and, with  
your fingernail, slide the memory card out  
of the slot.  
battery  
Note: Please consult “Battery Use and  
Safety” on page 94 before using this product.  
battery installation  
1
With your fingernail, pull the battery  
door cover lock toward the front of the  
phone.  
5
Close the memory card slot cover.  
essentials  
11  
   
2
Slide the battery door upwards until it is  
released from the phone.  
4
Push the battery down until it snaps in  
place.  
5
Replace the battery door and slide it  
down while pressing gently until you  
hear a click.  
battery charging  
New batteries are not fully charged.  
3
Remove the battery door.  
Note: You must remove the battery  
door to attach a lanyard to the phone.  
essentials  
12  
 
charge using the charger  
high-power connectors are located directly on  
your computer.  
1
Pull out the connector cover, and insert  
the charger into the micro USB connector  
on your phone as shown.  
turn it on & off  
To turn on your phone, press and hold  
.
for  
a few seconds or until the display turns on. If  
prompted, enter your four-digit unlock code.  
charge from your computer  
To turn off your phone, press and hold  
two seconds.  
.
for  
You can partially charge your phone’s  
battery by connecting a Motorola-approved  
USB cable from your phone’s micro-USB port  
to a high power USB connector on a  
computer (not a low-power one, such as the  
USB connector on your keyboard or  
Note: If you press the  
.
for more than four  
seconds, the handset will power “On” in  
Transmitters Off mode. See “transmitters” on  
bus-powered USB hub). Typically, USB  
essentials  
13  
   
enable security  
answer a phone call  
You must enable security the first time you  
power on you phone or within 10 days of first  
activation of your phone.  
1
2
3
If you want to answer the call on speaker  
phone, press the speaker key  
)
.
If you want to answer the call using the  
handset, press . To hang up press  
1
2
Press  
You are prompted to enable security.  
Press under Yes. A series of screens  
K
under Ok  
.
,
..  
If you are using a Bluetooth headset,  
press the answer key on your headset. To  
hang up press the key again.  
K
followed by the default home page  
displays.  
3
Press  
.
to return to the home screen.  
advanced calling  
feature  
make a phone call  
call waiting To accept the second call  
and put the active call on  
Enter a phone number and press  
voice command. See “place a call using a  
,
or use a  
hold press  
K
under Yes.  
To accept the second call  
and end the active call press  
To hang up press  
..  
.
.
essentials  
14  
                   
Note: A Private call ends automatically if there  
is no activity on the call for a few seconds.  
feature  
any key  
answer  
To answer phone calls by  
pressing any key on the  
send call alerts  
Sending a call alert discretely lets the  
recipient know that you want to talk to him or  
her on a Private call.  
keypad press  
/
>
u
>
>
On  
Phone Calls  
>
Any Key Ans  
.
make a private call  
Your Private ID is the number at which you  
receive one-to-one Private calls.  
When you send a call alert, the recipient’s  
handset displays your name and emits a  
series of beeps or vibrations.  
Note: PTT means Push To Talk/ Walkie-Talkie.  
to send a call alert  
to make a Private call  
1
Enter the Private ID you want to call as  
you would when making a Private call.  
1
Enter the Private ID you want to call.  
2
Press  
K
under Alert.  
2
Press and hold the PTT button. Begin  
talking after your phone emits a chirping  
sound.  
When the message Ready To Alert appears on  
the display, press the PTT button until the  
message Alert Successful appears.  
3
Release the PTT button to listen.  
To end the call press  
..  
essentials  
15  
       
You cannot receive phone calls or Private calls  
until you do.  
answer a private call  
1
When your phone emits a chirping sound  
or vibrates to indicate you are receiving a  
Private call, wait for the caller to finish  
speaking.  
to answer a call alert  
1
2
3
Press the PTT button to start a Private call  
with the sender.  
or  
2
3
Press and hold the PTT button and begin  
talking after your phone emits a chirping  
sound.  
Queue the call alert by pressing  
K
under  
Queue  
.
Release the PTT button to listen.  
or  
To end the call press  
..  
Clear the call alert by pressing  
K
under  
Clear  
.
answer a call alert  
making a phone call while in a  
private call  
When you are in a Private call, you can make a  
phone call to the other participant if that  
person’s phone number is stored in Contacts.  
When you receive a call alert, you must:  
option  
Answer: Begin a Private call with the sender.  
Queue: Store the call alert to the call alert  
queue.  
1
While in a Private call press  
,.  
Clear: Dismiss and delete the call alert.  
essentials  
16  
     
2
3
A confirmation screen will appear asking  
to Start Call To:.  
4
Enter the number for the entry and press  
under Save when done.  
K
Press  
K
under Yes or press  
r
to begin  
the call.  
contacts  
feature  
store a phone number  
or private ID  
edit/delete Press  
contact Select a contact and press  
entry Edit. Change the  
desired content and press  
. Press under Save  
set ringer ID Press under Contacts.  
Select a contact and press  
K
under Contacts.  
/
>
You can store a phone number or private ID in  
Contacts  
:
r
K
.
Find it:  
/
>
L
>
[New Contact]  
K
1
Enter a name for the new entry. Each  
entrys name can contain 20 characters.  
/
>
Edit [Ring Tone/Picture].  
>
Select Ringer and chose your  
desired ring tone. Press  
under Done  
2
3
Select a specific Ring Tone  
.
K
Select a type for the entry (Mobile  
,
Private1  
,
.
Private2  
Pager  
choose Private1 Private2  
,
Work1  
,
Work2  
,
Home  
,
Email1  
,
Email2 Fax,  
,
,
IP or Other). To store a private ID  
or  
.
essentials  
17  
       
3
If you chose a phone number, press  
,
to  
feature  
call the entry, or if you chose a Private ID,  
press and hold the PTT button to call the  
number.  
set picture  
ID  
Press  
K
under Contacts.  
Select a contact and press  
/
>
Edit  
Select Picture and choose  
your desired picture. Press  
under Back under  
Save  
>
[Ring Tone/Picture].  
finding your phone  
number and private ID  
K
>
K
.
Find it:  
/
>
m
>
My Info.  
call a stored phone  
number or private ID  
messaging  
Your phone has the ability to use both  
MOSMS and Multimedia Messaging Service  
(MMS) messaging. The type of messaging  
your phone uses will be determined by your  
service provider. If your service provider offers  
messaging through MOSMS, your phone  
sends and receive messages using MOSMS.  
Find it:  
/
>
L.  
1
2
Scroll to the Contacts entry.  
If the Contacts entry contains more than  
one number, scroll left or right until the  
type of the number you want to call is  
displayed (Mobile  
,
Private1, Private2, Work1,  
If your service provider offers MMS, your  
phone sends and receives messages using  
Work2 Home, etc.).  
,
essentials  
18  
           
MMS. Additionally, MMS allows you to send  
and receive messages that may include text,  
pictures, videos, and audio files.  
quick notes  
When you are filling in the Message and Subject  
fields, you can add ready-made words or short  
phrases called Quick Notes. After you add  
these words or phrases, you can edit them as  
you would any other text.  
create and send messages  
1
From the home screen press  
K
under  
Mesgs  
>
[Create Message].  
1
While you are creating a message, scroll  
to or select Message or Subject  
2
Enter the phone number of the person  
you want to send the message to and  
.
2
3
Press K under QNotes.  
press  
r
or press  
K
under Search. Select  
Select the quick note you want to insert  
into the message.  
Contacts or Recent Calls to find the number you  
want.  
4
Press  
K
under Send.  
3
Select Message: and enter the text of the  
message or to use a quick note press  
K
under QNotes and scroll to the quick note  
you want.  
MMS features  
Note: The following features are available only  
when using MMS.  
4
If you want to send the message, press  
K
under Send or to delete the message  
without sending it, press K under Cancel  
.
essentials  
19  
     
more message options  
To view more message fields in a message  
insert a picture, video, and  
audio recording  
you are creating, select ....More....  
You can insert one or more pictures, videos,  
and audio files from the media center into the  
body of the message. You can include text in  
the body of your message in addition to these  
items.  
The following options become available:  
option  
Subject: Create or edit the subject line.  
Attach: Attach a picture, audio file or voice  
record.  
insert items  
While you are filling in the Message field, press  
Cc: Send a copy of this message to  
someone else.  
/
, select Insert and choose from Insert Picture  
Insert Audio Insert Video Capture Video, Capture Picture or  
Record Voice  
,
,
,
Auto Replies: Allows you to create a list of  
possible short answers for the recipient to  
choose when replying to your message.  
.
A list of available pictures, videos, or audio  
files appears. You can only insert one item at a  
time.  
Priority: Set priority Normal or High  
Valid Until: Set a date after which attempts to  
deliver the message end, or press  
under No Date  
.
Select the picture, video, or audio recording  
you want to insert.  
K
.
essentials  
20  
If you want to attach more items, select  
remove an inserted item  
To remove an item from the message you are  
[New Attach]  
.
3
When finished, press  
K
under Done.  
creating, highlight it and press  
K
under Delete.  
Note: You can only attach audio files and  
pictures if they are not forward locked and if  
their DRM settings do not prevent you from  
sending.  
attach a picture, video, or audio  
recording  
You can attach one or more pictures, audio or  
voice recordings from your phone into the  
body of the message. You can include text in  
Forward locked items are usually copyright  
protected, and you cannot share them with  
anyone, such as in Private calls or by  
uploading them from your phone.  
the body of your message in addition to these  
items.  
1
While you are filling in the Attach field,  
press [New Attach] > and select from Browse  
take a new picture  
Pictures  
,
Capture Picture  
,
Browse Audio  
,
Record Voice  
,
1
While you are creating a message, scroll  
to any message field and press or  
select Attach  
Browse Video, or Record Video  
.
/
>
[New Attach].  
A list of available pictures, audio files, or  
voice recordings appears.  
2
Select Capture Picture. This accesses the  
camera.  
2
Select the picture, audio or voice record  
you want to attach.  
essentials  
21  
3
Take the picture. For instructions on how  
to take the picture see “camera” on  
3
To save the video, press  
To discard the video without saving it,  
press under Discard  
r.  
K
.
4
When you have captured the picture you  
4
The video is attached to the message and  
saved to the media center in the default  
storage location.  
want, press  
To discard the picture, press  
Discard. You can then take another picture.  
When finished, press under Done  
K
under Save.  
K
under  
create a new voice record  
5
K
.
You can create a new voice record to send  
with a message:  
The picture is attached to the message  
and saved to the default storage location.  
1
2
3
Press  
/
or select Attach  
>
[New Attach].  
record a video  
You can record a video to send with a  
message:  
Select Record Voice  
.
Say the message you want to record into  
the microphone.  
1
2
Select Attach  
Record and adjust video.  
To view the video without saving it, press  
under Review  
>
[New Attach] > Record Video.  
4
When you are finished recording, press  
r
.
5
When finished, press  
K
under Done.  
K
.
essentials  
22  
6
The voice record is attached to the  
message and saved to the media center  
and the list of voice records.  
2
To edit the fields you want to change,  
follow step 2 through step 4 in “create  
and send messages” above.  
remove an attachment  
delete a draft  
To remove an attachment in a message you  
are creating:  
When you send a draft, it is removed from the  
Drafts folder.  
1
2
Select Attach  
.
1
To delete a message in the Drafts folder  
without sending it, scroll to the message  
Scroll to the attachment you want to  
remove.  
you want to delete and press  
K
under  
Delete  
.
3
Press  
/
>
Unattach.  
2
Press  
K
under Yes to confirm.  
use drafts  
When you save a message as a draft, it is  
saved in the drafts folder.  
inbox  
Find it: Press  
/
>
E
>
Inbox.  
Find it: Press  
/
>
E
>
Drafts.  
receive a message  
1
Select the draft you want to edit.  
1
To view the message press  
K
under Read  
.
essentials  
23  
     
2
To dismiss the message notification press  
under Exit  
3
To reply to the message, press  
Reply.  
K
under  
K
.
While reading a text and numeric message  
that contains a phone number, you can press  
delete unread messages  
,
to call that number.  
1
Scroll to the message you want to delete.  
Press under Delete and under Yes to  
confirm.  
2
K
K
threaded inbox  
The threaded Inbox allows you to organize  
your messages by subject or sender.  
forward a message  
1
From the Message Center, Press  
Threading, and select from None Subject, or  
Sender  
/
>
1
Press  
/
>
Forward.  
,
2
Create and send your message.  
Embedded objects and attachments are  
included when you forward a message.  
.
Note: Threading by subject is dependant  
upon your service provider.  
lock and unlock messages  
Locked messages cannot be deleted until you  
unlock them.  
read from the message center  
1
From the home screen press  
K
under  
Mesgs  
>
Inbox.  
1
View the message you want to lock or  
unlock.  
2
Select the message you want to read.  
essentials  
24  
 
2
Press  
/
>
Lock Message or Unlock Message  
.
From field, the To field, the Cc field, the Subject  
field, or the body of the message, you can  
call a number in a message  
store this information to Contacts.  
1
2
View the message.  
If a message you receive contains a phone  
number or Private ID in the From field, the To  
field, the Cc field, the Subject field, or the body  
of the message, you can call or send a call  
alert to that number.  
Highlight the number or email address  
you want to save.  
3
Press  
To store the number or email address as a  
new entry, select [New Contact]  
/
>
Save Number or Save Email.  
4
send a call alert  
.
1
2
3
4
View the message.  
To store the number or email address to  
an existing entry, select the entry.  
Highlight the Private ID you want to alert.  
5
6
With the Contacts type field highlighted,  
Press  
/
>
Alert.  
press  
;
left or right to display the  
Push the PTT button.  
Contacts type you want to assign the  
number or email address.  
store message information to  
contacts  
Press  
K
under Save.  
If a message you receive contains a phone  
number, Private ID, or an email address in the  
reply to a message  
To reply to a message:  
essentials  
25  
1
2
View the message you want to reply to.  
To reply to the sender only, press  
under Reply or press under Reply All to  
reply to all recipients.  
go to a website  
If a message contains one or more website  
URLs, you can go to that website.  
K
K
1
2
View the message.  
3
A list of short phrases appears. Select any  
of these phrases to add it to your  
Highlight the website URL you want to go  
to.  
messages or select [Create Reply]  
.
3
Press /> Go To Website.  
4
Edit any message fields you want to  
change.  
Note: The entire URL must appear in the  
message to allow you to open the website.  
5
Press  
K
under Send.  
embedded objects and  
attachments  
If a message contains pictures, videos, or  
audio files in the body of the message,  
highlight each picture, video, or audio  
recording to view or play it.  
use auto replies  
If the message you are replying to was sent  
with auto replies, it contains a numbered list  
of possible replies for you to send. Press the  
number of the reply you want to send. The  
reply is sent immediately without further  
action.  
If a message contains a picture, video, or  
audio recording as an attachment, open the  
essentials  
26  
 
attachment to view the picture or play the  
video or audio recording.  
2
Highlight the picture, video, or audio  
recording you want to save.  
3
Press  
/.  
open attachments  
4
Select Save Picture Save Video, or Save Audio.  
,
1
View the message.  
The item will save in the default storage  
location.  
2
Highlight the attachment you want to  
open. Attachments appear at the end of a  
message.  
delete an embedded picture,  
video, or audio recording  
3
Press  
r.  
Attachments of an unknown type cannot be  
opened, but can be deleted.  
To delete a picture, video, or audio recording  
that is part of the body of a message you  
receive:  
save an embedded picture,  
video, or audio recording  
To save a picture, video, or audio recording  
that is part of the body of a message you  
receive:  
1
2
View the message.  
Highlight the picture, video, or audio  
recording you want to delete and  
press  
/.  
3
Select Delete Picture  
,
Delete Video, or Delete Audio  
.
1
View the message.  
essentials  
27  
Find it: Press  
/
>
E
>
Outbox.  
save attachments  
1
View the message.  
resending failed messages  
from the outbox  
2
Highlight the attachment you want to  
save.  
1
Scroll to the message you want to resend  
or press the number of the message you  
want to resend.  
3
Press  
/
>
Save Attachment.  
Selected items save to the default storage  
location.  
2
Press  
K
under Resend.  
delete attachments  
cancel an unsent message  
1
View the message.  
1
Highlight the message you want to  
cancel.  
2
Highlight the attachment you want to  
delete.  
2
3
Press  
Press  
/.  
3
Press  
Press  
/
>
Delete Attachment.  
K
under Cancel.  
4
K
under Yes to confirm.  
sent items  
The Sent Items box holds sent messages.  
outbox  
The Outbox holds all unsent messages.  
essentials  
28  
   
delete all unlocked sent messages  
forward items from sent items  
1
Press  
/
>
Delete All.  
1
Scroll to the message you want to  
forward.  
2
Press  
K
under Yes to confirm.  
2
3
Press  
Make edits if you wish, select the  
recipient and press under Send  
/
>
Forward.  
customize messaging  
K
.
Find it:  
/
>
E
>
/
>
Setup.  
This option is available from many  
context-sensitive menus.  
check delivery status  
If a message was successfully sent and you  
set the message to confirm delivery, you can  
check the delivery status:  
The following options become available:  
option  
1
2
Scroll to the message you want to view.  
Press  
Signature: Allows you to create a signature  
that is automatically inserted at the end of  
your messages. Signatures can be edited  
before sending the message.  
/
>
Delivery Status.  
delete sent messages  
Quick Notes: Lets you create new Quick Notes  
and edit or delete Quick Notes you created.  
1
2
3
Scroll to the message you want to delete.  
Press  
Press  
K
K
under Delete  
.
under Yes to confirm.  
essentials  
29  
       
folder hold up to 30 messages each. If they  
are full, you cannot receive messages, send  
messages, or save drafts until you delete  
some items.  
option  
Cleanup: Controls how long messages remain  
in the Inbox and Sent Items before being  
deleted.  
Note: Media files and Java applications can  
affect the available amount of memory on  
your phone. If you run out of memory and  
your Inbox, Sent Items, Outbox, and Drafts  
folder are empty, delete unwanted media files  
and Java applications to free up memory.  
Delivery Rpt Default: Allows you to be  
automatically notified when your message  
is delivered.  
Memory Size: Shows a report on used and free  
memory in your phone.  
MMS Setup: opens a submenu to set MMS  
options.  
To view the amount of memory available in  
your text inbox:  
Note: Available with MMS only.  
Find it: Press  
/
>
E
>
/
>
Setup  
>
Text Msg Setup: opens a submenu to set text  
messaging options.  
Memory Size  
.
MMS setup  
Note: Available with MOSMS only.  
Find it:  
/
>
E
>
/
>
Setup  
>
MMS Setup.  
manage memory  
This option is available from many  
Your text Inbox and Sent Items hold 200  
messages each. The Outbox, and Drafts  
context-sensitive menus when you are using  
MMS.  
essentials  
30  
 
The following options become available:  
This option is available from many  
context-sensitive menus when you are using  
MOSMS.  
option  
Friendly Name: Allows you to create a friendly  
name. Your friendly name is displayed in the  
From field on other iDEN handsets when  
your message is received.  
The following options become available:  
option  
Srvc Cntr No: Allows you to enter a service  
Download Options: Controls whether your phone  
downloads new messages. Set this option  
to Automatic if you want your phone to  
download new messages automatically.  
Select Manual if you want your phone to  
prompt you before downloading new  
messages.  
center number.  
Expire After: Allows you to set the number of  
days before a message expires.  
new quick notes and reply  
phrases  
Replies: Lets you create or edit and delete  
reply phrases you created.  
create quick notes or replies  
1
From the Setup menu, select Quick Notes, or  
select MMS Setup  
>
Replies  
.
text message setup  
2
3
Select [New Quicknote], or [New Reply]  
.
Find it:  
/
>
E
>
/
>
Setup  
>
Text Msg setup.  
Enter text from the keypad and press  
r.  
essentials  
31  
edit quick notes or replies  
You can edit only Quick Note phrases you  
have created.  
delete all quick notes or replies you  
have created  
1
From the Setup menu, select Quick Notes, or  
select MMS Setup  
>
Replies  
.
1
2
3
From the Setup menu, select Quick Notes, or  
select MMS Setup  
>
Replies.  
2
3
Press  
Press  
/
>
Delete All  
.
Select the quick note or reply you want to  
edit.  
K
under Yes to confirm.  
cleanup options  
Edit the text and press  
r.  
The cleanup option controls how long  
messages remain in the Inbox and Sent Items  
before they are deleted. You set the cleanup  
option for the Inbox and Sent Items  
separately.  
delete quick notes or replies you have  
created  
1
From the Setup menu, select Quick Notes, or  
select MMS Setup  
>
Replies.  
2
Scroll to the quick note you want to  
delete.  
The clean up option deletes only read,  
unlocked messages and sent messages.  
3
Press  
Press  
K
K
under Delete  
.
Find it:  
/
>
E
>
/
>
Setup  
>
Cleanup.  
4
under Yes to confirm.  
1
Select Inbox or Sent Items  
.
essentials  
32  
2
Choose a clean up option from the  
following list:  
option  
FirstIn FirstOut: Messages are deleted as  
option  
necessary on a FirstIn FirstOut basis.  
Off: Messages are never automatically  
deleted.  
Custom: Lets you create a clean-up option of  
up to 199 messages or 99 days for the  
Inbox and Sent Items.  
5 Messages: If you have more than 5  
messages, messages are deleted in the  
order they were received, starting with the  
oldest, until 5 are left.  
3
Press  
K
under Yes to automatically  
delete messages now or press  
K
under  
No to delete messages later.  
10 Messages: If you have more than 10  
messages, messages are deleted in the  
order they were received, starting with the  
oldest, until 10 are left.  
delete all messages  
To delete all read, unlocked messages from  
the Inbox, all messages in the Drafts folder, all  
successfully sent messages in Sent Items, or  
unsent messages in the Outbox:  
1 Day Messages are deleted if they are older  
:
than 1 day.  
3 Days: Messages are deleted if they are  
older than 3 days.  
Find it:  
/
>
E
.
1
2
Select Inbox  
,
Drafts Sent Items, or Outbox.  
,
With these options, messages are deleted  
when you exit the message center after  
setting the option.  
Press Delete All.  
/
>
essentials  
33  
3
Press  
K
under Yes to confirm.  
notification tone every 30 seconds until you  
access the message or dismiss the alert.  
delete a thread  
To delete a thread from the Inbox:  
If you are on a call when you receive a  
message, your phone may sound a  
notification tone during the call or after you  
end the call, depending on how you set your  
notification options.  
1
2
3
From the Inbox, select a thread.  
Press  
Press  
/
>
Delete Thread.  
K
under Yes to confirm.  
set notification options  
message notifications  
When you receive a message, your phone  
notifies you with text on the display, a  
notification tone or vibration.  
To control whether your phone sounds  
message notification tones while you are on a  
phone call:  
Find it:  
/
>
u
>
Phone Calls> Notifications.  
You can access the message or dismiss the  
notification.  
Select from the following options:  
option  
If you dismiss the notification, the message is  
not deleted. It can be accessed through the  
message center.  
Receive All: Tones sound during calls for all  
types of messages.  
If you are not on a phone call when you  
receive a message, your phone sounds a  
essentials  
34  
option  
Message Mail Only: Tones sound during calls for  
mail messages; tones for all other types of  
messages are held until you end calls.  
Delay All: Tones for all types of messages are  
held until you end calls.  
Note: Delay All is the default setting.  
To set notification options during a call press  
/
>
Call Setup  
>
Notifications.  
essentials  
35  
basics  
See page 1 for a basic phone diagram.  
status indicators  
Status indicators are shown at the top of the  
home screen:  
display  
1 2  
3
4
5
6
7
The home screen shows when you turn on  
the phone. To dial a number from the home  
screen, press number keys and  
,.  
Note: Your home screen may look different.  
Ready  
Time  
5/10/09  
Date  
Contcs  
Mesgs  
1
Signal Strength Indicator: Vertical bars  
show the strength of the network  
Left  
Right  
Soft Key Label  
Contcs  
Mesgs  
Soft Key Label  
connection. You can’t make or receive  
calls when  
~
shows.  
Soft key labels show the current soft key  
functions. For soft key locations, see page 1.  
basics  
36  
         
2
3
Active Phone Line:  
line 1 is ready to make calls.  
%
indicates phone  
main menu  
All your phone’s features can be accessed  
through the main menu. You can set the main  
Speaker On/Off: Sounds associated with  
Private calls can be set to come through  
the earpiece rather than through the  
speaker.  
menu to appear as List View  
,
Tab View or Icon View  
.
Find it: Display/Info  
/
>
u
>
>
Menu View  
.
4
5
6
Ringer Vibe/Off: Your phone is set to not  
ring.  
carousel menu  
The Carousel Menu allows you to access up  
to nine applications from your phone’s idle  
screen.  
Message Indicator: Shows when  
you receive a text message.  
Packet Data: Your handset is ready to  
transfer packet data or is transferring  
packet data when it shows a blinking  
arrow.  
accessing an application  
1
Using the navigation key, scroll left or right  
until you highlight the desired application.  
7
Battery Charge Indicator: A fuller battery  
indicates a greater charge. Recharge the  
battery when your phone shows Low Battery  
2
Press to launch the application.  
r
.
Note: Availability of the Carousel Menu is  
dependent on your service provider.  
basics  
37  
                   
auto hide  
text entry  
1
Press  
Auto Hide  
/
.
>
u
>
Personalize  
>
Carousel  
>
Your phone provides convenient ways to enter  
words, letters, punctuation, and numbers  
whenever you are prompted to enter text (for  
example, when adding a Contacts entry or  
when using Text Messaging).  
2
Select from Off  
,
2 seconds 4 seconds, or  
,
8 seconds  
.
Note: When Auto Hide is set to Off, the Carousel  
Menu will always be visible on the idle  
screen.  
change the character input mode  
1
When you see a screen where you can  
enter text, press to change the  
/
assigning applications  
character input mode.  
1
Press  
/
>
u
>
Personalize  
>
Carousel.  
2
Select one of the following options:  
2
Highlight the position on the Carousel  
Menu you would like the application to  
entry method  
Alpha  
Press a key several times for  
occupy and press  
r.  
different characters.  
3
Highlight an application and press  
select it.  
r
to  
Word  
Enter words using a predictive  
text entering system that lets  
you enter a word with fewer  
keypresses.  
basics  
38  
   
The Word English text input method  
entry method  
combines the groups of letters found on each  
phone key with a fast-access dictionary of  
words, and recognizes what you want to text  
as you type. It first offers the most commonly-  
used word for the key sequence you enter  
and lets you access other choices with one or  
Symbols  
Numeric  
Enter symbols.  
Enter numbers by pressing the  
numbers on the keypad.  
Text Input Selects the desired entry  
Settings  
languages and Word Prediction  
features.  
more presses of the  
0
key.  
Insert  
Selects a item to be inserted,  
such a picture, an audio/video clip  
or a voice recording.  
enter a word using “word” method  
character input  
1
Select the Word character input method.  
Note: available only when using  
MMS messaging.  
2
Press the corresponding keys once per  
letter to enter a word (for example, to  
enter the word Bill, press 2 4 5 5).  
Tip: When entering text, press  
letter capitalization (Abc  
#to change  
abc).  
(If you make a mistake, press  
a single character. Press and hold  
delete an entire entry.)  
*
to erase  
to  
>
ABC  
>
*
word method  
The Word English text input method lets you  
enter text into your phone by pressing keys  
just once per letter.  
3
To accept a word and insert a space,  
press  
#
.
basics  
39  
 
To accept a word completion (such as  
lowercased. After a character is entered, the  
cursor automatically advances to the next  
space after two seconds or when you enter a  
character on a different key.  
Billion when you entered Bill), press  
right.  
;
If you get a word you don’t want, you can  
press the  
0
key to see more word  
Characters scroll in the following order:  
choices and pick the one you want.  
characters  
1
Space . 1 ? ! , @ & : ; “ - ( ) ‘ ¿ ¡ %  
£ $ ¥  
alpha method  
To enter characters by tapping the keypad:  
2
3
4
5
6
7
8
9
0
#
A B C 2 Á Ã Â À Ç  
D E F 3 É Ê È  
G H I 4 Í Ì  
1
Select the Alpha method.  
2
Press the corresponding keys repeatedly  
until the desired letter appears. (For  
example, to enter the word Bill, press  
twice, three times, three times,  
and three times again. If you make a  
2
J K L 5  
4
5
M N ñ O 6 Ó Õ Ô Ò  
P Q R S 7 ß  
5
mistake, press Delete to erase a single  
character. Press and hold Delete to erase an  
entire word.)  
T U V 8 Ú Ü Û Ù  
W X Y Z 9  
+ - 0 * / \ [ ] = > < # §  
Space / Shift  
By default, the first letter of an entry is  
capitalized and the following letters are  
basics  
40  
 
characters  
volume  
Press the volume keys up  
or down to:  
*
Back  
When entering text, press and hold  
#
to  
turn off an incoming  
call alert  
switch between lowercase and uppercase  
letters. The icons in the upper left-hand corner  
of the screen show the character type.  
change the earpiece  
volume during calls  
character type  
change the ringer  
volume from the  
home screen  
Q or T Lowercase  
R or U Uppercase  
S or V Shift Lock  
Tip: You can quickly set your ringer to  
Vibrate All by holding the down volume  
key in the home screen.  
W
Numerical  
Symbols  
X
basics  
41  
           
navigation key  
transmitters  
Press the navigation key  
up, down, left, or right to  
scroll to items in the  
display. When you  
Consult airline staff about the use of the  
Transmitters Off feature during flight. Turn off  
your phone whenever instructed to do so by  
airline staff.  
highlight the desired  
Transmitters Off turns off your phone’s calling  
and Bluetooth features in situations where  
wireless phone use is prohibited, but you can  
use the phone’s other non-calling features  
when Transmitters is turned Off.  
item, press  
it.  
r
to select  
handsfree speaker  
You can use your phone’s handsfree speaker  
to make calls without holding the phone to  
your ear.  
Find it:  
/
>
u
>
Advanced  
>
Transmitters  
>
Off.  
During a call, press  
K
under Speaker to turn  
the handsfree speaker On.  
The handsfree speaker stays on until you  
press  
K
under Speaker again.  
basics  
42  
           
features for the hearing  
impaired  
using your phone with a  
hearing aid  
For best results use the following optimization  
procedures and handset setting. They  
generally apply as well for users with cochlear  
implants:  
If your HA has a telecoil, activate its switch,  
then also rotate the handset as illustrated to  
align the telecoils.  
Note: Some automatically switched hearing  
aids may need an auxiliary switching magnet.  
optimize your handset position and  
orientation  
If you are unsure whether your HA is telecoil  
equipped or needs an auxiliary magnet,  
please refer to your HA user guide or contact  
a hearing aid professional or supplier.  
While in a phone call slide your phone up and  
down, then left and right until best  
microphone coupling is obtained. You also  
may need to adjust your hearing aid (HA)  
volume setting.  
basics  
43  
   
Approximate telecoil location is within  
6-13 mm of this location.  
TTY  
feature  
Off - Shut off  
M - Microphone  
T - Telecoil  
turn On TTY Press  
feature  
/
>
TTY  
u
>
Phone Calls  
>
>
Use TTY  
>
On.  
choose TTY Press  
/
>
TTY  
u
mode  
Phone Calls  
>
.
Approximate telecoil location is just  
above the battery.  
Select from TTY  
,
VCO or HCO.  
change the  
TTY baud  
rate  
Press  
Phone Calls  
/
>
TTY  
u
>
choose your hearing aid setting  
Find it: Phone Calls Hearing Aid.  
>
>
Baud.  
/
>
u
>
>
Select 45.45 or 50.00  
.
1
Set this option to Microphone. Microphone  
coupling is now optimized.  
change TTY While in the TTY call, press  
mode  
during a call  
/
>
In Call Setup  
>
TTY  
>
Type.  
or  
Select from TTY  
,
VCO or HCO.  
2
Set this option to Telecoil. Handset meets  
US federal requirements for telecoil  
coupling sound or set this option to Off  
(factory default). This is the setting for non  
HA users.  
Note: The TTY device must be connected to  
the phone through the micro-USB port.  
A 2.5 mm to micro USB adapter is required to  
support TTY.  
basics  
44  
 
lock and unlock keypad  
security features  
feature  
When your phone is closed and on the home  
screen, your keypad locks to prevent  
accidental key presses.  
phone lock  
To lock the phone press  
/
Phone Lock  
Auto Lock  
>
u
>
Security  
>
To change how long your phone waits before  
it automatically locks your keypad press  
>
Lock Now or  
/
>
.
u
>
Security  
>
Keypad Lock  
>
Auto Lock and select a  
keypad lock To lock the keypad press  
time interval or Off  
To lock your phone’s keypad, close the slide,  
or with the slide open, press /*  
To unlock your keypad press under Unlock  
and press under Yes  
.
/
>
u
>
Security  
>
Keypad Lock. Select Lock Now, or  
.
select Auto Lock and select  
K
,
from Off  
,
2 seconds, 4 seconds, or  
K
.
8 seconds  
.
enable SIM Press  
PIN  
change SIM Press  
PIN  
/
>
.
u
>
Security  
Security  
>
SIM PIN  
>
On  
/
>
u
>
>
>
Change Passwords  
SIM PIN.  
Note: You can make emergency calls on a  
locked phone (see page 81).  
basics  
45  
         
main attractions  
My Images provides a slide show, image  
browser and image editor.  
multimedia  
Your phone comes with several multimedia  
applications to let you access pictures, videos,  
and audio files stored in your phones memory  
or in the Audio, Music, Podcast, Image and  
Video folders on a memory card inserted in  
your phone’s memory card slot:  
My Videos plays video files on the display.  
Camera lets you take still pictures.  
Camcorder lets you take short movies.  
Ringtones lets you purchase and preview  
ringtones for your phone.  
Media Center is a central repository to  
view all supported multimedia files on  
your device or your memory card.  
VoiceRecord lets you record audio notes to  
yourself.  
In addition, the following audio files can be  
accessed through the media center:  
Note: The Media Center cannot read  
the Music and Podcast folder from the  
SD card.  
VoiceRecords  
My Music provides an enhanced music  
player for music and podcast files.  
Musical ring tones in the list of ring  
tones  
main attractions  
46  
                   
Audio files saved from MMS messages  
received  
Media files supported by the Media Center  
include:  
Audio files downloaded to your phone  
Format  
Bit Rate / Info  
Sampling  
Rate  
Because the memory card inserted in your  
phone may contain files saved to it using a  
device other than your phone, not all types of  
pictures, videos, and audio files on the  
memory card may be accessed through your  
phone’s media center.  
AAC  
Up to 320kbps  
48 kHz  
(MPEG4  
AAC-LC)  
.aac* , .3gp,  
.m4a, .3ga,  
.mp4  
AAC+  
Up to 128 kbps  
(16 to 128 kbps)  
Max: 48  
kHz  
Items in the media center can be sent in  
MMS messages and with Bluetooth. See  
“Bluetooth®” on page 74.  
.aac*, m4a,  
.3ga, .mp4  
AAC+  
Up to 320 kbps  
(16 to 320 kbps)  
Up to  
48 kHz  
Enhanced  
.aac*, .m4a,  
.3ga, .mp4  
Pictures in the media center can be sent in  
Private calls using Send via PTT. See “PTX  
AMR-NB  
.amr, .3gp,  
.3ga, .mp4  
4.75 kbps – 12.20 8 kHz  
kbps (supports all  
3GPP specified  
rates)  
main attractions  
47  
Format  
Bit Rate / Info  
Sampling  
Rate  
Format  
Bit Rate / Info  
Sampling  
Rate  
AMR-WB  
.awb, .3ga,  
.3gp  
6.6 kbps - 23.85  
Kbps(supportsall  
3GPP specified  
rates)  
16 kHz  
PCM 16-bit  
Linear  
Up to 1536 kbps  
Up to 48  
kHz (8,  
11.05, 12,  
16, 22, 24,  
3, 44, 48  
kHz)  
.wav, .au  
iMelody  
.imy  
1 – 3.5 kHz  
Monophonic  
N/A  
N/A  
PCM 8-bit  
Linear  
.wav, .au  
Up to 1536kbps  
Up to 704 kbps  
Up to 704 kbps  
Up to  
48 kHz  
MIDI XMF  
.xmf, .mmf,  
.xmf0, .xmf1,  
.mxmf  
64 channels  
64 channels  
Up to 320kbps  
PCM 8-bit  
A-law  
.wav, .au  
Up to  
48 kHz  
MIDI  
N/A  
Stand  
.mid, .midi,  
.smf  
PCM 8-bit  
mu-law  
.wav, .au  
Up to 44  
kHz (8,  
11.05, 12,  
16, 22, 44  
kHz)  
MP3  
Up to  
48 kHz  
.mp3*,  
.mpga*  
Real Audio  
LBR (Cook)  
.rm, .ra, ram  
Up to 96 kbps  
Up to  
44.1 kHz (8,  
11, 22, 44  
kHz)  
main attractions  
48  
Supported video file formats include:  
Format  
Bit Rate / Info  
Sampling  
Rate  
Format  
Resolution / Extension  
Real Audio  
Sipro  
5 kbps (fixed  
rate)  
8 kHz  
Bit and  
Frame Rate  
(ACELP®.net)  
.rm, .ra, ram  
8.5/6.5 kbps (dual 8 kHz  
rate)  
MPEG4 +  
352 x 288  
.mp4, .3gp  
AMR-NB  
and 320 x  
240 (up to  
MPEG4 +  
AMR-WB  
16 kpbs (wide  
band)  
16 kHz  
256 kbps);  
176 x 144 and  
128 x 96 (up  
to 128 kbps);  
up to 30 fps  
MPEG4 + AAC /  
AAC+ /Enhanced  
AAC+  
Real  
Audio 10  
.rm, .ra, ram  
Up to 192 kbps  
Up to 320 kbps  
Up to  
48 kHz (8,  
11, 12, 16,  
22.05, 24,  
32, 44.1, 48  
kHz)  
H.263 + AMR-NB  
H.263 + AMR-WB  
352 x 288 (up .3gp  
to 256 kbps);  
176 x 144 and  
128 x 96 (up  
to 64 kbps);  
15 fps  
H.263 + AAC /  
AAC+ /Enhanced  
AAC+  
WMA v9 L2  
(also WMA  
v3, v7, v8)  
.wma*  
48 kHz  
Real Video G2 / 8 Up to 320  
.rm, .rmvb  
/ 9  
kbps, 320 x  
240, 15 fps  
(*) These formats support album art and lyrics.  
main attractions  
49  
The music player will display the name of the  
song playing and the artist.  
Format  
Resolution / Extension  
Bit and  
Frame Rate  
Now Playing...  
H.264  
Up to 320  
kbps, 320 x  
240, 15 fps  
.mp4, .3gp  
.wmv, .asf  
The Song  
The Band  
WMV8 / WMV 9  
Up to 384  
kbps, 320 x  
240, 24 fps  
0:39  
3:38  
Pause  
Back  
my music  
The music player groups the music files into  
folders and lists. When you select a music file  
to play, the music player plays this file, then  
plays the other music files grouped with it.  
Your handset includes a music player that you  
can use to play music files stored in the  
phone memory and the MUSIC/AUDIO/  
PODCAST directories on the memory card  
inserted in your phone.  
The music player also plays podcasts you  
download to your computer and then save on  
the Podcast directory on your phone’s  
memory card. You can mark highlights within  
a podcast file to help you find the parts you  
most want to listen to.  
main attractions  
50  
Connect your phone to your computer using a  
compatible USB cable. (Wait for the  
connection to be completed. When  
connected, the host computer will  
automatically detect your phone.)  
the Music folder, Podcasts to the Podcast folder  
and videos to the Video folder.  
filename rules  
When naming files stored on the memory  
card, the following rules apply:  
If your service provider offers MMS, you can  
send details of the podcast to a friend and  
send feedback to the podcast creator using  
MMS messages.  
The filename can contain UTF8  
characters, including ASCII, however  
only supported characters will be  
displayed.  
understanding the memory  
card folder structure  
When you first insert the memory card into  
The filename can be up to 255  
characters long, including the file  
extension, however only the first 32  
characters will be displayed.  
your phone, five folders are created: Audio  
,
Warning: If a music file name is longer than  
255 characters, including the file format  
(.MP3), the song will not be visible on the  
player and therefore can not be played. This  
can be corrected by renaming the file and  
replacing it on the card.  
Image Music,  
,
Podcast, and Video. In order to view  
files stored on the memory card, you must  
store the given file in its corresponding format  
folder: audio files such as ring tones, and  
voice recordings to the Audio folder, pictures to  
the Image folder, music files such as songs to  
main attractions  
51  
 
contents of that folder or press  
the contents of the folder.  
r
to view  
play music files  
Find it:  
/
>
j
>
My Music or press  
[.  
To stop viewing a folder and return to the  
folder or list that contains it, press under  
Note: The i856w does not have a Music Key  
and a Play Key.  
K
Back  
.
1
Scroll to choose how you want your music  
played (Songs, Playlists, Albums, etc.).  
play music while loading files  
Tip: The Songs folder contains all the  
music files on the memory card in a single  
list.  
The first time the music player finds music  
files on your memory card, it loads and  
organizes these files. This may take a long  
time for a large number of files.  
2
To play the first music file in the folder,  
press  
K
under Play. (If the selected folder  
To play music while files are loading:  
contains subfolders, this plays the first  
music file in the first of the subfolders.)  
Find it:  
/
>
j
>
My Music.  
1
Scroll through songs and folders while  
loading is going on the background.  
Press  
Scroll to a music file and press  
Play or to play the first music file in it.  
r
to view the folder’s contents.  
K
under  
2
Scroll to a music file or folder and press  
y
K
under Play.  
Any time you are viewing a list of folders with  
the music player, you can scroll to a folder and  
press  
K
under Play to start playing the  
main attractions  
52  
The following options become available  
through the navigation panel:  
set up the music player  
Find it:  
/
>
j
>
My Music  
>
/
>
Setup  
option  
The music player can be set up with the  
Pause and Resume: Press  
pause, and press  
K
under Pause or  
y
to  
following options by pressing  
/
>
Setup:  
K
under Play or to  
y
option  
resume playing paused music files.  
Shuffle: Lets you set the music player to play  
the music files in a list or folder in random  
order.  
Skip to Next or Previous: Press and release  
right or left to skip to the next or previous  
music file.  
;
Repeat: Lets you set the music player to play  
one or all the music files in a list or folder  
repeatedly.  
Fast Forward and Rewind: Press and hold  
or left for 2 seconds to fast forward or to  
rewind.  
;
right  
Visuals: Lets you choose among different  
types of visual equalizers which sync with  
the Music.  
3D Music: Lets you experience surround  
effects when the handset is tethered  
to a stereo headset.  
Setting the 3D Music feature to On, allows you  
to select effects from the list of Music Reverbs  
.
main attractions  
53  
Playlists enable you to organize music files,  
but they do not change anything in other  
folders or on the memory card. Adding or  
deleting a file on a playlist does not copy,  
delete or move it.  
option  
Album View: Lets you choose to view either a  
list view or an image view.  
Auto Update: Lets you reload all music files  
every time you launch My Music. If you set  
Auto Update to Off, it will follow the last known  
music library configuration in order to save  
loading time.  
create a playlist  
Find it:  
[Create New]  
/
.
>
j
>
My Music  
>
Playlists  
>
Equalizer: Lets you customize the sound of the  
music player.  
1
Enter a playlist name.  
Note: If you do not assign a name, the  
playlist is named Playlist followed by a  
number. For example, the first playlist you  
create without naming is automatically  
View: Lets you choose between Default view  
and Folder view.  
Music Reverbs: Lets you choose a 3D sound  
effect for use with the 3D Music feature.  
named Playlist-1  
.
2
Select [Add Songs]. A list of all music files  
appears.  
work with playlists  
Playlists are lists of music files you create  
from the files already available through My  
Music.  
Tip: For options to help you sort through  
this list, press  
/.  
main attractions  
54  
3
Select each file you want on the playlist. A  
checkmark appears by each selected file.  
option  
Remove Songs: You can remove some or all  
songs while creating or editing a playlist.  
Tip: To deselect a selected item, scroll to  
a selected file and press  
When you are finished selecting files,  
press under Done and under Save  
The following options are available for existing  
playlists by pressing  
r.  
Before you have saved a new playlist or  
while editing a playlist, scroll to the song  
you want to remove and press  
Remove Song and press  
Remove All Songs. Press  
4
K
K
.
/
>
r
K
, or you can select  
under Yes to  
/
>
My Music> Playlists >  
confirm and  
Reorder Playlists: You can change the order of  
the playlists in the Playlists folder. Press  
Reorder Playlists. Scroll to the  
playlist you want to move and press  
under Grab, and then scroll to the place  
where you want the playlist to appear and  
press under Insert  
Delete a Playlist: While in the music player  
select Playlists. Scroll to the playlist you want  
to delete and press Delete Playlist. Press  
under Yes to confirm.  
K
under Save.  
/
>
Edit Playlist:  
option  
/
>
Reorder Songs in a Playlist: You can change the  
order of the music files while creating or  
editing the playlist by pressing  
Reorder Songs. Scroll to the song you want to  
move, press under Grab, and then scroll  
to the place where you want the song to  
appear and press under Insert  
Edit playlist  
>
K
/
>
K
K
.
K
.
/
>
K
main attractions  
55  
Find it:  
Select the song you want to add to your  
favorites and press  
/
>
j
>
My Music  
>
Songs.  
option  
Edit a Playlist: You can change a playlist name,  
add music files, remove music files, and  
change the order of the music files. Select a  
playlist and press  
changes and press  
Delete all Playlists: While in the music player  
select Playlists. Press Delete All Playlists  
and press under Yes to confirm.  
/
>
Add To Favorites.  
work with podcasts  
/
K
>
Edit Playlist. Make  
under Save  
.
Find it:  
/
>
j
>
My Music  
>
Podcasts.  
Note: The Podcasts folder is empty until you  
download podcasts from your computer.  
/
>
K
1
Scroll to view individual podcast episodes  
or folders containing multiple episodes of  
the same program.  
Note: This deletes all playlists except the  
Favorites playlist.  
Reload Music: Searches your memory card for  
music files.  
2
Press  
r
to view the podcast episodes  
within a folder or the details screen of an  
individual podcast episode.  
use the favorites playlist  
You can pause, resume, fast-forward, and  
rewind just as with any other music file.  
The Favorites playlist is a permanent playlist. You  
can Add To Favorites, remove and change the  
order of the music files, but you cannot  
rename or delete music files.  
Some functions differ when playing a podcast:  
Pressing  
y
when you have scrolled to  
a podcast displays a screen showing  
main attractions  
56  
podcast details, but does not play the  
podcast. To play the podcast, press  
under Play. After you begin playing the  
add a highlight marker  
K
1
While playing a Podcast press  
/
>
Add Highlights  
.
podcast, pressing  
y
pauses and  
2
3
Press  
K
under On to mark the beginning.  
resumes the podcast.  
Go to the point in the podcast that you  
want to mark as the end of the highlight  
and press  
If the podcast you are playing contains  
highlights, pressing and releasing the  
K
under Off.  
;
right or left skips to the next or  
previous highlight within the podcast,  
or to the beginning or end of the  
podcast.  
4
Press K under Back.  
Tip: Highlight markers can be deleted by  
pressing Clear or pressing  
Clear All Highlights from the  
/
>
/
>
Edit Highlights  
>
/
>
highlights  
Podcasts menu.  
Highlights are portions of a podcast that are  
marked to help you find them more easily. You  
can use the music player to add and delete  
highlight markers. Press and release (don’t  
send podcast information  
You can only share podcast details with  
others. If you want to share podcast details,  
you have saved to your memory card, you can  
send it in an MMS message that can be saved  
and downloaded onto their computer.  
hold) the  
;
right or left to find them.  
You can play all the highlights in a podcast and  
skip everything that is not marked as a  
highlight using Highlights Only  
.
main attractions  
57  
Find it:  
Forward Details  
/
>
>
j
>
Send.  
My Music  
>
Podcasts  
>
/
>
The music player continues playing and the  
handset returns to the home screen. To jump  
back to the music player, press  
K
under Player.  
background music  
Your handset has the capability to play music  
in the background while you are accessing  
my images  
My Images lets you easily browse, edit and  
view a slide show of images on your phone or  
memory card on your display.  
other features like Settings  
GPS Contacts MMS Datebook  
,
Media Center  
,
Bluetooth,  
,
,
,
,
Memo Recent Calls, and  
,
others.  
You can also enjoy listening to your favorite  
background music while browsing the web,  
reading news or checking the weather.  
my images menu  
The My Images menu has many photo  
management features. The following options  
are available for images by pressing  
play music in the background  
/
>
j
>
/> and choose one of the following:  
Find it:  
/
>
j
>
My Music  
>
Songs  
.
1
Select a music file and press  
the song.  
y
to play  
option  
Edit: Displays several options for editing your  
photos including:Crop, Rotate/Flip, Color Adjustment,  
Resize, Borders, Stamps, Text and Text Bubble.  
2
Press  
/
>
Hide Player.  
main attractions  
58  
           
option  
option  
Slideshow: Starts a slide show containing  
images from the currently highlighted  
image.  
Set As Caller ID: Allows you to assign the  
highlighted image to a Contact.  
viewing images  
Save as New: Lets you save an image with a  
new filename.  
Find it:  
/
>
j
>
My Images  
Slideshow to view a show of all  
images in the current folder.  
Press left or right to switch between  
viewing images on the phone and the  
memory card. The and keys can  
also be used to scroll the images.  
.
Preview: Displays the highlighted image.  
1
2
Press  
/
>
Send Via BLuetooth: Lets you send the image via  
Bluetooth.  
;
Rename: Lets you rename the image  
filename.  
#
*
Delete Current: Deletes the current highlighted  
image.  
Delete Multiple: Lets you chose multiple images  
to delete at one time.  
my videos  
My Videos lets you easily browse and view  
video files on your phone or memory card.  
Switch to Card: Toggles between images stored  
on the phone or memory card.  
Find it:  
/
>
j
>
My Videos.  
Set as Wallpaper: Sets the highlighted image as  
the device wallpaper.  
main attractions  
59  
         
viewing videos  
My Videos will display the video in portrait  
mode by default.  
camera  
You can save pictures taken with the  
integrated camera in your phone’s memory,  
and can access them through the Media  
Center.  
Tip: To change the default to landscape mode  
press  
/
>
Full Screen.  
Pictures you take can be sent via Private Calls,  
Bluetooth, or MMS message. You can also  
set them as your phones wallpaper.  
my videos setup menu  
Find it:  
/
>
j
>
My Videos  
>
/
>
Setup  
Note: The Camera function is available only  
when the slide is open.  
The My Videos Setup Menu allows you to  
change the following settings:  
option  
access the camera  
To access the camera, press  
View: Displays options for viewing your  
videos as Default and Folder view.  
/
>
j
>
Camera  
.
3D Audio: Lets you turn 3D audio On and Off  
.
To take pictures aim the camera lens and  
press under Capture or press  
Reverbs: Lets you choose from a number of  
3D audio visual settings.  
K
r.  
To save the picture, press  
To discard the picture without saving it, press  
under Discard  
r.  
K
.
main attractions  
60  
     
From the camera viewfinder, you can press  
to enter Menu Options  
option  
/
.
GPS Tag: Allows you to turn GPS Tag feature On  
The following options become available:  
of Off  
Picture Quality: Adjust the picture quality to  
Normal or Fine  
Picture Size: Set up the picture size to Max  
(1024x1280) XL (480x640) L (240x320) M (120x160),  
.
option  
.
Media Center: Opens the Media Center  
application.  
,
,
,
Record Video: To switch the camera to  
camcorder mode.  
S (96x128), or Wallpaper (176x220). You can also  
set picture size from the viewfinder by  
pressing  
Zoom: To set the camera’s zoom to 1x 2x, or  
,
left and right.  
4x  
.
White Balance: Sets the white balance to  
Automatic  
Night.  
Remove Card: To safely remove the memory  
card from the phone.  
,
Sunny, Cloudy, Fluorescent, Tungsten or  
Self Timer: Delay capturing the picture for a  
selected number of seconds. The values  
Exposure Control: Adjusts the exposure of the  
picture from -2 to +2.  
are: Off (default), 10 seconds  
,
15 seconds, 20  
Style: Sets the type of picture effect to Normal  
Black and White  
,
seconds  
.
,
Sepia, Solarization and Negative.  
To turn off the timer before the picture is  
captured, press under Cancel  
Memory Usage: Shows the total amount of Used  
Free, and total Capacity of the phone’s memory  
,
K
.
and of the SD memory card.  
main attractions  
61  
   
The following options become available:  
option  
Memory Card: Allows you to remove the  
option  
memory card, set where videos are stored:  
On Phone or Prefer On Card, format the memory  
Ask for Name: If this option is On, you are  
prompted to enter a name for each picture  
before saving. Otherwise, pictures are  
automatically saved with the date and a  
number as their names.  
card, and to display Help  
.
Camera Setup: To access the camera set up  
screen.  
Shutter Sound  
:
Set the default sound the  
camera makes when is taking a picture.  
Sets the default value for the Picture  
access the media center  
You can access the media center from the  
Default Size  
:
Size option.  
camera at any time by pressing  
/
>
Media  
Center, except when you are using the Camera  
Setup menu or viewing the memory screen.  
Default Quality: Sets the default value for the  
quality of the picture.  
The media center contains all your pictures,  
music files, and videos located on your  
GPS Tag : If this option is On, pictures will be  
tagged with the geographic location of  
where they were taken.  
phone’s memory. Press  
your results.  
*
and  
#
to filter  
customize the camera  
Find it:  
/
>
j
>
Camera  
>
/
>
Camera Setup  
main attractions  
62  
The following options become available:  
camcorder  
You can use your phone’s camcorder feature  
to record videos.  
option  
Media Center: Opens the Media Center  
application.  
Find it:  
/
>
j
>
Camcorder  
Capture Picture: To switch the camera to picture  
mode.  
record video  
Zoom: To set the camera’s zoom to 1x 2x, or  
,
1
Press  
To stop recording and discard the partially  
recorded video, press under Cancel  
To stop recording the video press  
under Stop  
To save the recorded video, press  
K
under Record, or press  
r.  
4x  
.
2
Remove Card: To safely remove the memory  
card from the phone.  
K
.
3
K
Video Size: Set up the picture size to Min  
.
(128x96) Med (176x144), or Max (352x288). You  
,
can also set picture size from the viewfinder  
4
r.  
by pressing  
left and right.  
Note: The Camcorder function is available  
only when the slide is open.  
From the camcorder viewfinder, you can  
press  
/
to enter Menu Options.  
main attractions  
63  
   
customize the camcorder  
option  
Video Length: Allows you to choose between  
Short, to limit video length for sending via  
MMS message, or Maximum for longer  
videos.  
Find it:  
/
>
j
>
Camcorder  
>
/
>
Camera Setup  
The following options become available:  
option  
Ask for Name: If this option is On, you are  
prompted to enter a name for each picture  
before saving. Otherwise, pictures are  
automatically saved with the date and a  
number as their names.  
Note: When set to Maximum, video length is  
limited to 60 seconds when stored to your  
phone’s memory. When stored to a  
memory card, video length is limited to  
available space on the memory card, or two  
hours.  
Shutter Sound  
:
Set the default sound the  
camera makes when is taking a picture.  
Sets the default value for the  
Memory Usage: Shows the total amount of Used  
,
Free, and total Capacity of the phone’s memory  
and of the memory card.  
Default Video Size  
:
Video Size option.  
Memory Card: Allows you to remove the  
memory card, set where videos are stored:  
On Phone or Prefer On Card, format the memory  
deleting a recorded video  
If you do not want to save the recorded video,  
card, and to display Help  
.
press  
K
under Discard to delete the recorded  
Camera Setup: To access the camera set up  
screen.  
video and return to the video viewfinder.  
main attractions  
64  
Pictures1  
sending video via MMS  
message  
To send the recorded video via an MMS  
Datebook events  
My Info  
message, press  
K
under Send. The video will  
Contact information  
Location information1  
be automatically attached to a new MMS  
message.  
You can choose to send messages, pictures,  
events, My Info Contacts or Location information to  
the Private ID you are engaged in a Private call  
Note: To ensure the video file is small enough  
to be sent via MMS, set the Camcorder video  
,
length to Short  
.
with, Private IDs on the Recent Calls list, and  
Private IDs stored in Contacts  
.
PTX features  
When you make or receive a Private call, your  
phone automatically determines whether the  
phone you are engaged in a Private call with is  
able to receive each of these items. Your  
phone saves this information for as long as  
the Private ID is on your Recent Calls list or is  
saved in your Contacts. Your phone updates the  
saved information each time you make or  
receive a call to or from that Private ID.  
With Push To View features, your phone can  
send and receive the following items through  
Private calls with other phones that have this  
capability:  
Short text messages1  
1. Additional charges may apply.  
main attractions  
65  
   
are prompted to respond. Press  
to acknowledge the message.  
K
under Yes  
send messages  
The Push to Send Messages feature  
lets you send short text messages through  
Private calls.  
begin a message from the Contacts or  
the Recent Calls list  
1
From the Contacts or the Recent Calls list,  
select the entry containing the Private ID  
you want to send the message to.  
When you send a message, it appears on the  
display of the phone you are engaged in the  
Private call with.  
2
Press  
/
>
Use PTT Feature  
>
Send Message.  
begin a message and choose a  
recipient  
You can begin a message during a Private call,  
begin a message from the PT Manager  
The PT Manager lets you select the Private ID  
you want to send the message to from Contacts  
or the Recent Calls list.  
from the Contacts list, the Recent Calls list, or from  
the PT Manager  
begin a message during a Private call  
While in a Private call, press  
.
Find it:  
/
>
N
>
PT Manager  
>
Send Message.  
Then select A Contact or A Recent Call to see a list  
of entries from the Contacts or the Recent Calls list  
that can receive messages.  
/
>
Use PTT Feature  
>
Send Message.  
Note: The first time you send a message,  
Messaging Fees May Apply Continue? appears and you  
main attractions  
66  
To view the message: Press  
K
under Read  
.
create messages  
To dismiss the message: Press  
K
under  
After you have begun a message and chosen  
a recipient, a screen appears that lets you  
create the text of the message you want to  
send. Your message may be up to 400  
characters long.  
Dismiss  
.
reply to a message  
1
2
3
View the message.  
Press under Reply  
You can choose from a list of ready-made  
words or short phrases called Quick Notes.  
You can use a Quick Note as it is or edit it  
before you send it. Editing a Quick Note  
changes the Quick Note for this message only  
and will not change the Quick Note on the list.  
K
.
Create the message and press the PTT  
button to send it.  
send pictures  
You can send pictures stored in the Media  
Center through Private calls. The picture you  
send appears on the Private call recipient’s  
display.  
send a completed message  
After you have completed your message,  
press the PTT button to send it.  
If the recipient accepts the picture, their  
phone saves the picture. The picture then  
appears in that phones recent call list.  
receive messages  
When you receive a message, a message  
notification appears on the display.  
main attractions  
67  
 
The first time you send a stored picture after  
turning the phone on, Picture Fees May Apply  
Continue? appears and you are prompted to  
respond.  
5
When prompted, press the PTT button to  
resume the Private call.  
start a call by sending a picture  
Note: You cannot make or receive Private  
calls while transmitting or receiving a picture.  
from the media center  
Find it:  
/
>
j
>
Media Center  
Scroll left or right to Media: Pictures  
Select the picture you want to send.  
Press  
1
2
3
4
.
send a picture during a call  
1
While in a Private call, press  
K
under  
>
Picture or press  
/
>
Use PTT Feature  
/
>
Send Via...  
>
Send Via PTT  
.
Send Picture.  
Select A Contact or A Recent Call.  
A list of pictures that can be included in a  
Private call appears.  
A list of contacts that have Private IDs and  
are able to receive pictures appears.  
2
3
4
Select the picture you want to send.  
5
Select the name of the person you want  
to send the picture to.  
Press the PTT button to send the picture.  
Wait while the picture is transmitted. The  
Private call is temporarily interrupted  
while a picture is transmitted.  
6
7
Press the PTT button to send the picture.  
When prompted, press the PTT button to  
resume the Private call.  
main attractions  
68  
from the PT Manager:  
Find it: PT Manager  
Select A Contact or A Recent Call.  
Pictures you receive are saved either to your  
phone’s memory or SD card. They are  
accessible through the media center.  
/
>
S
>
>
Send Picture.  
1
When you see a message asking if you want  
to accept the picture, press Yes to accept or No  
to decline.  
A list of contacts that have Private IDs and  
are able to receive pictures appears.  
2
Select the name of the person you want  
to send the picture to.  
clear a picture from the display  
3
4
5
Select Browse Picture or Capture Picture.  
If you want to clear a picture from your  
phone’s display while still on a call, press  
Press the PTT button to send the picture.  
/
>
Clear Screen.  
Once picture has been sent, when  
prompted press the PTT button to resume  
the call.  
send a datebook event  
to send a datebook event during a  
private call  
receive a picture  
1
While in a Private call press  
/
>
When someone sends you a picture, your  
phone emits a tone or vibrates and a message  
appears asking if you want to accept the  
picture.  
Use PTT Feature  
>
Send Event.  
Note: If these options do not appear on  
the menu, the Private ID you are engaged  
main attractions  
69  
in a private call with is not able to receive  
Datebook events.  
chose a recipient from Contacts, Recent  
Calls or Memo, and press  
PTT button to send.  
r. Push the  
2
3
4
If you want to create a new datebook  
event, press  
K
under New and create the  
set my info sending option  
event in your datebook. If you want to  
chose an existing event do so.  
You can control what portion of the  
information in My Info is sent and whether it is  
sent automatically in every call or only when  
you choose to send it.  
If the event is a recurring event: Select  
This Event Only to send only the event  
selected. Select Repeat Events to send all  
occurrences of the event.  
Find it:  
PTT My Info  
/
>
>
S
>
PT Manager  
>
Configure  
>
Info to Send  
Push the PTT button to send the event.  
1
Select or remove the fields you want to  
send.  
send my info  
2
Press  
K
under Done.  
1
While in a Private Call press  
/
>
The information your phone sends always  
includes My Name, and Private ID1. You may also  
Send My Info via PTT., and push the PTT button  
to send.  
send Line 1  
,
Carrier IP, and Private ID2 depending on  
or  
your sending options.  
2
From the home screen press  
Send My Info via PTT. Enter a  
Private ID or press under Browse to  
/
>
C
>
My Info  
>
/
>
K
main attractions  
70  
 
automatic sending  
To control whether you send your information  
automatically:  
3
Push the PTT button to send.  
or  
1
2
From the home screen press  
/
>
S
>
Find it:  
PTT My Info  
/
>
>
S
>
PT Manager  
>
Configure  
>
PT Manager  
>
Send Contact.  
Auto Send  
Enter the Private ID number of the person  
you want to send the Contact information  
1
2
Select On or Off  
to or press  
K
under Browse  
.
When you make a call in which your  
information is sent automatically, the  
name you entered in the My Name field of  
My Info appears on the display of the  
recipients phone, even if your name and  
Private ID are not stored in the recipients  
Contacts.  
3
Select from Recent Calls  
,
Contacts, or Memo.  
Select the contact information you want to  
send and push the PTT button.  
send your location  
You can transfer your approximate  
location information through Private calls to  
other enabled phones. Using the integrated  
GPS feature, the following location  
information can be shared:  
send contact information  
1
While in a Private Call press  
/
>
Use PTT Feature  
.
2
Select Send Contact and select the contact  
information you want to send.  
Time Stamped Latitude/Longitude  
main attractions  
71  
   
Relative Location or Direction and  
distance from the sender in Miles or  
Kilometers  
You cannot turn your phone’s ability to send  
and receive My Info and contact information  
on and off.  
Find it:  
/
>
S
>
PT Manager  
>
Send Location.  
Find it:  
/
>
S
>
PTT Options On/Off PTT Features.  
>
1
Select A Contact or A Recent Call.  
1
Check or uncheck Messages, Pictures,  
Events or Location.  
A list of contacts that have Private IDs and  
are able to receive locations appears.  
one touch PTT  
2
3
Select the name of the person you want  
to send your location to.  
Find it:  
/
>
S
>
PTT Options One Touch PTT.  
>
Press the PTT button to send your  
location.  
One Touch PTT sets your phone to do any of  
the following each time you press the PTT  
button from the home screen:  
Note: The location information can be stored  
in the recipients recent call list.  
option  
Off: Nothing happens when you press the  
PTT button from the home screen.  
turn PTT features on and off  
You can turn your phone’s ability to send and  
receive messages, pictures, and Datebook  
events and location info on and off.  
Quick PTT: Go to Quick PTT. See “quick PTT”  
main attractions  
72  
   
option  
option  
Last Call: Call the most recent Private ID or  
Group on the recent calls list.  
Send Contact: Go to the first screen to send a  
Assigned Number: Call a Private ID you assign.  
Enter the number using your keypad, or  
Send Location: Go to the first screen to send  
press  
K
under Search. Select Contacts  
.
,
Recent  
Calls, or Memo  
PT Manager: Go to PT Manager. See “PT  
quick PTT  
Send Message: Go to the first screen to send a  
message.  
Quick PTT lets you quickly make a call,  
when accessing any Private IDs on your  
phone.  
Send Picture: Go to the first screen to send  
To view a list of Contacts a with Private IDs in  
Contacts  
:
Send Event: Go to the first screen to send a  
Datebook event.  
Find it:  
To move between Contacts  
use the left or right, or press  
To make a Private call:  
Select the entries you want.  
main attractions  
/
>
S
>
Quick PTT  
Send My Info: Go to the first screen to send My  
,
Recent Calls, or Memo  
,
;
*
or  
#.  
1
73  
 
Bluetooth®  
2
3
Press  
K
under Done.  
Push the PTT button.  
Find it:  
/
>
c
PT manager  
The PT Manager lets you quickly access PTT  
features, and other Private call features, from  
the main menu.  
turn Bluetooth on or off  
You can turn your phone’s Bluetooth feature  
on or off. While Bluetooth power is on, your  
phone can communicate with other devices.  
Find it:  
/
>
C
>c  
>
Setup Power  
>
Find it:  
/
>
S
>
PT Manager  
1
2
Select On to power Bluetooth On.  
1
Select Quick PTT Send Picture  
,
Send Message  
,
,
Send  
Event Send My Info Send Contact, Send Location, or  
,
,
Select Name if you wish to assign a name  
to your handset.  
Configure. After choosing what PTT item you  
are sending, select a contact and press  
the PTT button to send.  
3
Select Find Me Duration to determine the  
amount of time in which your handset can  
be found by other Bluetooth devices.  
or  
2
Select Configure to configure your PTT Quick  
You can turn off Bluetooth if you want to  
prolong battery life or if you enter an area  
where Bluetooth is prohibited.  
Notes  
,
PTT My Info, PTT Location, One Touch PTT, or  
On/Off PTT Features  
.
main attractions  
74  
           
Some Bluetooth devices ship with  
Bluetooth PINs. Please refer to your  
Bluetooth device’s user guide to locate  
this information.  
make a Bluetooth connection  
connect your handset with a Bluetooth  
headset  
Find it:  
[Look for Devices]  
/
>
C
>
c
>
Audio Devices>  
If a device ships without a Bluetooth PIN,  
then you can enter any PIN for that  
device. To establish a connection to that  
device, enter the same PIN for both your  
phone and the device. For example, if you  
enter 1234 as the device’s PIN, then enter  
1234 as your phone’s PIN.  
1
Follow the instructions on your Bluetooth  
headset to set it up to be found.  
2
Once your Bluetooth headset is set to be  
found press  
phone will scan for the Bluetooth headset  
until it finds it. Press when you see  
r
on your handset. Your  
5
Press  
K
under Ok.  
r
the name of the Bluetooth headset on  
your screen.  
This handset offers the Bluetooth auto pair  
feature with auto pair compatible Motorola  
devices. When bonded via Bluetooth with a  
certain device, the pin will not be required  
3
Your handset requires that you create a  
bond in order to connect with a Bluetooth  
headset. Press  
K
under Yes when you  
connect your handset with another  
Bluetooth device  
are prompted to bond with the headset.  
4
Enter the Bluetooth pass key.  
Find it:  
/
>
C
>
c
>
Pair to Devices  
main attractions  
75  
 
1
2
Select the device you want from the list of  
found devices on your screen.  
send information via Bluetooth  
Your handset can transfer Contacts entries,  
Datebook events, audio files, pictures and  
videos to another Bluetooth device.  
Create a bond if you are prompted to do  
so.  
If you have previously connected to a device,  
the device will be stored on your phone so  
you can connect with it easily.  
The receiving device must be within 32 feet  
(10 meters) of your phone in order to connect.  
Note: Files sent or received may be up  
to 10 MB, depending on your service  
provider. File transfers will not work if a  
microSD card is not installed in your phone.  
use Bluetooth during a call  
You can connect with available Bluetooth  
devices during a call.  
sending information  
1
2
While in a call, press  
/
>
Use Bluetooth.  
1
From within Contacts, Datebook, or Media Center,  
Select the audio device you want to  
connect to from the list of Audio Devices  
select the Contacts entry, Datebook  
event, audio file, video, or picture you  
want to send.  
.
If the Audio Devices list contains only one device,  
your phone will try to connect to it.  
2
3
Press  
/
>
Send Via...  
>
Bluetooth.  
Select the device you want to transfer the  
contact information to, or search for the  
device by selecting [Look for Devices]  
.
main attractions  
76  
 
4
If prompted, bond with the device.  
3
Double click on FIle Transfer Service.  
Your phone connects with the devices and  
transfers the information.  
4
Drag and drop the files to the appropriate  
folder.1 See “understanding the memory  
how to check if your PC  
supports Bluetooth FTP  
Note: This process may be different  
depending on the PC manufacturer.  
1
Right click on the Bluetooth icon in the  
system tray and open Bluetooth  
configuration.  
2
Click on the Client Applications tab and  
check that File Transfer is active.  
Note: This process may be different  
depending on the PC manufacturer.  
file browsing with the  
Bluetooth file transfer service  
1. If a music file is not visible in My Music, press  
/
>
1
2
Double click the My Computer Icon on the  
desktop.  
Reload Music while in the music player application. All  
music files within the Music folder on your microSD  
card will be loaded into My Music.  
Double click on My Bluetooth Places.  
main attractions  
77  
call features  
pictures sent or received  
Datebook events received  
turn off a call alert  
You can press the volume keys to turn off a  
call alert before answering the call.  
The recent calls list displays up to 20 of the  
most recent calls and call alerts.  
1
Press  
screen, briefly press  
Calls.  
/
>
Recent Calls or from the idle  
recent calls  
The recent calls list contains information  
associated with calls you have made and  
received and call alerts you have received.  
,
to access Recent  
2
3
Scroll through the list.  
To view more details of the item  
press  
When you send or receive Private calls, the  
recent call list contains the following PTX  
items with those calls:  
r
.
store an item to contacts from  
recent calls  
Phone calls, Private calls, My Info, Contacts or  
Location entries received from other phones  
contact information received  
My Info received  
short text messages received  
call features  
78  
         
can be stored to the Contacts list from the  
Recent Calls list.  
caller ID  
Caller ID allows people to identify a caller  
before answering the phone by displaying the  
number of the incoming call. If you do not  
want your number displayed when you make  
a call, just follow these easy steps.  
Find it:  
/
>
Recent Calls.  
1
Scroll to or select the item you want to  
store.  
2
Press  
K
under Save to store the  
information as a new entry in the  
Contacts list.  
To block your phone number from being  
displayed for a specific outgoing call:  
or  
1
2
3
Press * 6 7  
Enter the number you want to call.  
Press  
.
3
Select an existing contact and update the  
information.  
,
.
4
Press  
K
under Save to save your changes.  
To permanently block your number, call your  
customer service provider.  
redial  
call forward  
Call forwarding sends calls to the phone  
numbers you specify. You can forward all calls  
to one number or forward missed calls to  
To redial your last outgoing call, press and  
hold . If your last outgoing call was a  
,
Private Call, push the PTT button to initiate a  
new Private call.  
call features  
79  
           
different numbers depending on the reason  
you missed the call. You can forward phone  
lines 1 and 2 independently.  
voice names  
You can place calls by speaking commands to  
your phone if you have previously assigned a  
voice name to your contacts.  
Find it:  
/
u
>
Phone Calls  
>
Call Forward.  
1
To forward all calls select All Calls and select  
To to enter the phone number you want all  
your calls forwarded to.  
assign voice names to contacts  
1
2
3
Press  
[New Contact]  
K
under Contacts and select  
.
or  
Assign a name, phone number and select  
[Options]  
2
You can specify a forwarding number for  
each type of missed call by selecting  
Detailed and choosing the following options:  
.
Select Voice Name and follow the prompt to  
record the voice name. Press to stop  
recording and store the voice name.  
r
If Busy: When your handset is on a call or  
transferring data.  
4
Press under Back and under Save.  
K
K
If No Answer: When you do not answer on  
the first 4 rings.  
place a call using a voice name  
Press the speaker key until you are  
prompted to say the voice name.  
The handset will automatically place the call.  
If Unreachable: When your handset is out of  
coverage or powered off.  
1
)
call features  
80  
     
are in a location where your phone's GPS  
antenna has established a clear view of the  
open sky and your local emergency response  
center has the equipment to process location  
information. Because of the limitations of this  
feature, always provide your location, to the  
best of your knowledge, to the emergency  
response center when you make an  
emergency calls  
Your service provider programs one or more  
emergency phone numbers that you can call  
under any circumstances. Emergency calls  
can be made without a SIM card, when your  
phone is locked, or when the SIM card is  
blocked.  
emergency call  
.
Note: Emergency numbers vary by country.  
Your phone’s preprogrammed emergency  
number(s) may not work in all locations, and  
sometimes an emergency call cannot be  
placed due to network, environmental, or  
interference issues.  
Note: Emergency calls cannot be placed  
while the keypad is locked, or if your phone is  
displaying a No Service message on the screen.  
To unlock the keypad, if the slide is closed,  
push up the slide to reveal the keypad. If the  
slide is open, press  
under Yes  
K
under Unlock, and press  
Dial 911 or your local emergency number to  
be connected to an emergency response  
center. If you are on an active call, you must  
end it before making an emergency call.  
K
.
international calls  
If your phone service includes international  
When you make an emergency call, your  
phone’s GPS Enabled feature can help  
emergency service personnel find you, if you  
dialing, press and hold  
0
to insert your local  
call features  
81  
           
international access code (indicated by +).  
Then, press the keypad keys to dial the  
country code and phone number.  
voicemail  
To receive voice mail messages, you must  
first set up a voice mail account with your  
service provider.  
speed dial  
Each phone number stored in Contacts is  
assigned a Speed Dial number, which you can  
use to call that number.  
receiving a message  
When you receive a voice mail message, New  
VoiceMail Message appears on the display.  
1
From the home screen, use the keypad to  
enter the Speed Dial number assigned to  
the phone number you want to call.  
To call your service providers voice mail  
system and listen to the message:  
1
Press  
To dismiss the message notification:  
Press or under Back  
If the caller leaves a message, this icon  
K
under Call.  
2
3
Press  
Press  
#
.
2
,
.
r
K
.
turbo dial  
3
appears on the display, reminding you that  
you have a new message.  
The first nine entries in your contacts are set  
for turbo dial. They can be called by pressing  
and holding the speed dial number  
(1 through 9).  
call features  
82  
             
customize  
4
When you are finished, press  
K
under  
ring tones  
Done  
.
To set the ring tone your phone makes when  
you receive phone calls, call alerts, message  
notifications, pictures sent using Send via PTT  
or Datebook reminders:  
Note: This icon  
you set your phone to Silent. This icon  
appears on the display if you set the phone to  
,
appears on the display if  
5
Vibrate All  
.
Find it:  
/
>
j
>
Ring Tones  
set your phone to vibrate  
1
2
Make sure Vibrate All is set to Off  
.
You can set your phone to vibrate instead of  
making a sound when you receive all phone  
calls, Private calls, call alerts, message  
notifications, pictures sent using Send via PTT,  
and Datebook reminders.  
Scroll through the list of ring tones and  
select the one you want to assign.  
Vibrate sets your phone to vibrate instead  
of making a sound. Silent sets your phone  
to neither vibrate nor make a sound.  
Find it:  
/
>
j
>
Ring Tones  
>
Vibrate All  
3
Select the features you want to assign the  
ring tone to.  
Set this option to On or Locked  
.
customize  
83  
         
Setting this option to On lets you turn Vibrate All  
off by pressing the up volume control. Setting  
this option to Locked requires you to press and  
hold the up volume control to turn Vibrate All off.  
The Locked option helps prevent you from  
accidentally turning Vibrate All off.  
4
When you are finished, press  
K
under  
Done  
.
backlight  
Set the amount of time that the display and  
java apps. backlights remain on, or turn off the  
PTT backlight feature to extend battery life.  
To set Vibrate All to On or Locked using the volume  
controls:  
Find it:  
/
>
u
>
Display/Info  
>
Backlight  
Press the volume controls to turn down the  
volume as far as possible to set Vibrate All to On  
.
Continue to hold the down volume control to  
wallpaper  
set Vibrate All to Locked  
.
Set a previously saved photo or picture as a  
wallpaper (background) image in your phone’s  
display or throughout all menu screens.  
To set your phone to vibrate instead of making  
a sound for some features but not others:  
Find it:  
/
>
j
>
Ring Tones  
Find it:  
/
>
u
>
Display/Info  
>
Wallpaper  
1
2
3
Make sure Vibrate All is set to Off  
.
1
2
Select Wallpaper  
Scroll through the list of pictures and  
press to select a picture.  
.
Select Vibrate from the list of ring tones.  
Select the features you want to set to  
make no sound.  
r
customize  
84  
       
You can set the wallpapers to change  
automatically after a certain period of time by  
turning on the Auto Cycle feature located in the  
feature  
event  
reminder  
When an event reminder  
occurs press under View.  
K
Wallpaper menu. You can select from 5 minutes  
,
Press K under Back to close  
the reminder.  
15 minutes  
,
1 hour  
,
8 hours  
,
Daily, or Startup  
.
receive  
datebook  
events via  
PTT  
To view the information  
while still in the Private call  
datebook  
feature  
press  
r.  
create  
datebook  
events  
To create a new Datebook  
event press  
Datebook  
The 5 most recent events  
received from a Private ID  
are stored with the that  
Private ID on the recent calls  
list.  
/
[New Event].  
>
C
>
>
see  
datebook  
event  
To see a calendar event  
press  
Press  
/
;
>
C
>
Datebook.  
left or right to see  
up or down  
to see the events.  
To store events to the  
the day and  
;
Datebook press  
K
under  
Save while viewing the event  
you want to store.  
customize  
85  
         
datebook setup  
options  
Find it:  
/
>
C
>
Datebook  
>
/
>
Setup  
Clock: Controls whether the time and date  
appear on the home screen; sets time and  
date format; sets year.  
You can view or change these options:  
options  
Start View: Sets Datebook to start in day view,  
week view, or month view when you  
access Datebook.  
hide or show  
location information  
Your phone is equipped with a Location  
feature for use in connection with location-  
based services that may be available in the  
future.  
Daily Begin: Sets the beginning of your day.  
This is the earliest time of day displayed in  
week view, if you have a 12-hour day view.  
Delete After: Sets the amount of time  
Datebook waits to delete an event after it  
occurs.  
Turning Location On will allow the network to  
detect your position using GPS technology,  
making some applications and services easier  
to use. Turning Location off will disable the  
GPS location function for all purposes except  
911, but will not hide your general location  
based on the cell site serving your call. No  
application or service may use your location  
Time Shift: Lets you shift the times of all  
Datebook events. This is useful if you are  
traveling to a different time zone.  
Alert Timeout: Sets the amount of time a tone  
continues to sound when you receive a  
Datebook reminder.  
customize  
86  
   
without your request or permission.  
GPS-enhanced 911 is not available in all areas.  
option  
By Permission: When an application attempts to  
view the location of your phone, you will be  
prompted to give permission. However,  
location information may still be available to  
the phone’s owner, fleet manager, or  
account administrator.  
set your privacy options  
Find it:  
/
>
C
>
GPS Privacy  
>
Select from the following options:  
option  
Restricted: No Java or similar software  
change GPS PIN  
When you receive your phone, your GPS PIN  
is 0000.  
applications may view the location of your  
phone. However, location information may  
still be available to the phone’s owner, fleet  
manager, or account administrator.  
To change your GPS PIN press  
/
>
u
>
Unrestricted: All applications may view the  
location of your phone, without notifying  
you.  
Security  
>
Change Passwords  
>
GPS PIN. Enter the  
current GPS PIN and enter the new four to  
eight digit GPS PIN. Re-enter the new four- to  
eight-digit GPS PIN to confirm.  
customize  
87  
Legal and Safety  
United States Federal Communications Commission, Code  
of Federal Regulations; 47 CFR part 2 sub-part J.  
Safety and General Information  
This section contains important information on the safe and  
efficient operation of your mobile device. Read this  
information before using your integrated multi-service  
portable radio.*  
American National Standards Institute (ANSI) / Institute of  
Electrical and Electronics Engineers (IEEE). C95. 1-1992.  
Institute of Electrical and Electronics Engineers (IEEE).  
C95. 1-2005 Edition.*  
Exposure to Radio Frequency (RF) Energy  
International Commission on Non-Ionizing Radiation  
Protection (ICNIRP) 1998.  
Your mobile device contains a transmitter and receiver. When it is  
ON, it receives and transmits RF energy. When you communicate  
with your phone, the system handling your call controls the power  
level at which your phone transmits.  
Ministry of Health (Canada). Safety Code 6. Limits of  
Human Exposure to Radio frequency Electromagnetic  
Fields in the Frequency Range from 3 kHz to 300 GHz,  
1999.  
Your mobile device is designed to comply with local regulatory  
requirements in your country concerning exposure of human beings  
to RF energy.  
Australian Communications Authority Radio  
communications (Electromagnetic Radiation - Human  
Exposure) Standard 2003.  
Portable Radio Product Operation and EME  
Exposure  
ANATEL, Brazil Regulatory Authority, Resolution 303 (July  
2, 2002) “Regulation of the limitation of exposure to  
Your Motorola radio product is designed to comply with the  
following national and international standards and guidelines  
regarding exposure of human beings to radio frequency  
electromagnetic energy (EME):  
*
The information provided in this document supersedes the general  
safety information in user’s guides published prior to May 1, 2006  
Legal and Safety  
88  
       
electrical, magnetic, and electromagnetic fields in the  
radio frequency range between 9 kHz and 300 GHz.”  
“Attachment to Resolution 303 from July 2, 2002."  
When using your radio product as a traditional  
two-way radio, hold the radio product in a  
vertical position with the microphone one  
to two inches (2.5 to 5 cm) away from the  
lips  
.
Operational Precautions  
For optimal mobile device performance, and to be sure that human  
exposure to RF energy does not exceed the guidelines set forth in  
the relevant standards, always follow these instructions and  
precautions.  
If you wear the mobile device on your body,  
always place the mobile device in a Motorola approved clip,  
holder, holster, case or body harness. If you do not use a body-worn  
accessory supplied or approved by Motorola and are not using the  
mobile device in the intended use positions along side the head in  
the phone mode or in front of the face in the two-way radio mode,  
or if you hang your device from a lanyard around your neck, keep  
the device at least 2.5 centimeters (1 inch) from your body when  
transmitting.  
Phone Operation  
When placing or receiving a phone call, hold your mobile phone as  
you would a landline telephone. Speak directly into the  
microphone  
.
Approved Accessories  
For a list of approved Motorola accessories call 1-800-453-0920, or  
visit our website at www.motorola.com/phoneaccessories.  
Two-way radio operation  
Your radio product has been designed and tested to comply with  
national and international standards and guidelines regarding  
human exposure to RF electromagnetic energy, when operated in  
the two-way mode (at the face, or at the abdomen when using an  
audio accessory) at usage factors of up to 50% talk/50% listen.  
RF Energy Interference/Compatibility  
Nearly every electronic device is subject to RF energy interference  
from external sources if inadequately shielded, designed or  
otherwise configured for RF energy compatibility. In some  
circumstances your mobile device may cause interference with  
other devices.  
Transmit no more than the rated duty factor of 50% of the time. To  
transmit (talk), push the PTT button. To receive calls, release the  
PTT button. Transmitting 50% of the time or less, is important  
because this radio generates measurable RF energy only when  
transmitting (in terms of measuring for standards compliance).  
Legal and Safety  
89  
     
your mobile device with your implantable medical device, consult  
your health care provider.  
Follow Instructions to Avoid Interference  
Problems  
Turn OFF your mobile device in any location where posted notices  
Hearing Aids  
Some phones may interfere with some hearing aids. In the event of  
such interference, you may want to consult your hearing aid  
manufacturer or physician to discuss alternatives.  
instruct you to do so.  
In an aircraft, turn off your mobile device whenever instructed to  
do so by airline staff. If your mobile device offers an airplane mode  
or similar feature, consult airline staff about using it in flight.  
Other Medical Devices and Health Care Facilities  
Implantable Medical Devices  
If you have an implantable medical devices, such as a pacemaker  
or defibrillator, consult your physician before using this mobile  
device.  
Persons with implantable medical devices should observe the  
following precautions:  
If you use any other personal medical devices, consult your  
physician or the manufacturer or your device to determine if it is  
adequately shielded from RF energy. Turn off your radio product  
when instructed to do so in hospitals or health care facilities that  
may be using equipment that is sensitive to external RF energy.  
Bluetooth  
ALWAYS keep the mobile device more than 20  
centimeters (8 inches) from the implantable medical  
device when the phone is turned ON.  
This device supports Bluetooth 1.2 including HSP, HFP, OPP, DUN,  
PBAP, and BPP. In order for Bluetooth devices to communicate with  
one another, they must utilize the same Bluetooth profile. To  
determine the profiles supported by other Motorola devices, visit  
www.hellomoto.com/bluetooth. For other devices, contact their  
respective manufacturer.  
DO NOT carry the mobile device in the breast pocket;  
Use the ear opposite the implantable medical device to  
minimize the potential for interference.  
Turn OFF the mobile device immediately if you have any  
reason to suspect that interference is taking place.  
Certain Bluetooth features including those listed may not be  
supported by all compatible Bluetooth-enabled devices, and/or the  
functionality of such features may be limited in certain devices, or  
by certain wireless carriers. Contact your wireless carrier about  
feature availability and functionality.  
Read and follow the directions from the manufacturer of your  
implantable medical device. If you have any questions about using  
Legal and Safety  
90  
 
Caring for the Environment by  
Recycling  
Driving Precautions  
The use of wireless phones while driving may cause distraction.  
Discontinue a call if you can’t concentrate on driving.  
This symbol on a Motorola product means the  
product should not be disposed of with household  
waste.  
Additionally, the use of wireless devices and their accessories may  
be prohibited or restricted in certain areas. Always obey the laws  
and regulations on the use of these products.  
Disposal of your Mobile Device and Accessories  
Responsible driving practices can be found in the “Smart Practices  
While Driving” section (see page 105).  
Please do not dispose of mobile devices or electrical accessories  
(such as chargers, headsets, or batteries) with your household  
waste. These items should be disposed of in accordance with the  
national collection and recycling schemes operated by your local or  
regional authority. Alternatively, you may return unwanted mobile  
devices and electrical accessories to any Motorola Approved  
Service Center in your region. Details of Motorola approved  
national recycling schemes, and further information on Motorola  
recycling activities can be found at: www.motorola.com/recycling  
Operational Warnings  
Obey all posted signs when using Mobile devices in public areas.  
Potentially Explosive Atmospheres  
Areas with potentially explosive atmospheres are often but not  
always posted, and can include fueling areas such as below decks  
on boats, fuel or chemical transfer or storage facilities, or areas  
where the air contains chemicals or particles, such as grain, dust  
or metal powders.  
Disposal of your Mobile Device Packaging and  
User’s Guide  
When you are in such area, turn off your handset, and do not  
remove, install, or charge batteries unless it is a radio product type  
especially qualified for use in such areas as “Intrinsically Safe” (for  
example, Factory Mutual, CSA, or UL approved). In such areas,  
sparks can occur and cause an explosion or fire.  
Product packaging and user’s guides should only be disposed of in  
accordance with national collection and recycling requirements.  
Please contact your regional authorities for more details.  
Legal and Safety  
91  
     
Symbol Key  
Your battery, charger, or portable radio may contain symbols,  
defined as follows:  
Symbol  
Definition  
Listening at full volume to  
music or voice through a  
headset may damage your  
hearing.  
Symbol  
Definition  
032374o  
Important safety information  
follows.  
Batteries and Chargers  
Do not dispose of your battery  
or phone in a fire.  
Caution: Improper treatment or use of batteries may present  
a danger of fire, explosion, leakage, or other hazard. For  
more information, see the “Battery Use and Battery Safety”  
section in this user’s guide.  
Your battery or phone may  
require recycling in  
032375o  
accordance with local laws.  
Contact your local regulatory  
authorities for more  
Keep Your Mobile Device and Its Accessories  
Away from Small Children  
These products are not toys and may be hazardous to small  
children. For example:  
information.  
Do not throw your battery or  
phone in the trash.  
A choking hazard may exist for small, detachable parts.  
Improper use could result in loud sounds, possibly causing  
hearing injury.  
Your phone contains an  
internal lithium ion battery.  
Li Ion BATT  
032378o  
Improperly handled batteries could overheat and cause a  
burn.  
Do not let your battery,  
charger, or phone get wet.  
Glass Parts  
Some parts of your mobile device may be made of glass. This glass  
could break if the product is dropped on a hard surface or receives  
Legal and Safety  
92  
a substantial impact. If glass breaks, do not touch or attempt to  
remove. Stop using your mobile device until the glass is replaced  
by a qualified service center.  
Limit the amount of time you use headsets or headphones  
at high volume.  
Avoid turning up the volume to block out noisy  
surroundings.  
Seizures/Blackouts  
Turn the volume down if you can’t hear people speaking  
near you.  
Some people may be susceptible to epileptic seizures or blackouts  
when exposed to flashing lights, such as when playing video  
games. These may occur even if a person has never had a previous  
seizure or blackout.  
If you experience hearing discomfort, including the sensation of  
pressure or fullness in your ears, ringing in your ears, or muffled  
speech, you should stop listening to the device through your  
headset or headphones and have your hearing checked.  
If you have experienced seizures or blackouts, or if you have a  
family history of such occurrences, please consult with your  
physician before playing video games or enabling a flashing-lights  
feature (if available) on your mobile device.  
For more information about hearing, see our Web site at  
www.motorola.com/hearingsafety (in English only).  
Discontinue use and consult a physician if any of the following  
symptoms occur: convulsion, eye or muscle twitching, loss of  
awareness, involuntary movements, or disorientation. It is always  
a good idea to hold the screen away from your eyes, leave the  
lights on in the room, take a 15-minute break every hour, and stop  
use if you are very tired.  
Repetitive Motion  
When you repetitively perform actions such as pressing keys or  
entering finger-written characters, you may experience occasional  
discomfort in your hands, arms, shoulders, neck, or other parts of  
your body. If you continue to have discomfort during or after such  
use, stop use and see a physician.  
Caution About High Volume Usage  
Warning: Warning: Exposure to loud noise from any  
source for extended periods of time may affect your  
hearing. The louder the volume sound level, the  
Open Source Software Information  
For instructions on how to obtain a copy of any source code being  
made publicly available by Motorola related to software used in  
this Motorola mobile device you may send your request in writing  
to the address below. Please make sure that the request includes  
the model number and the software version number.  
less time is required before your hearing could be  
affected. To protect your hearing:  
Legal and Safety  
93  
 
MOTOROLA, INC.  
OSS Management  
600 North US Hwy 45  
Libertyville, IL 60048  
USA.  
Export Law Assurances  
This product is controlled under the export regulations of the  
United States of America and Canada. The Governments of the  
United States of America and Canada may restrict the exportation  
or re-exportation of this product to certain destinations. For further  
information contact the U.S. Department of Commerce or the  
Canadian Department of Foreign Affairs and International Trade.  
The Motorola website opensource.motorola.com also contains  
information regarding Motorola’s use of open source.  
Motorola has created the opensource.motorola.com to serve as a  
portal for interaction with the software community-at-large.  
Battery Use and Safety  
To view additional information regarding licenses,  
Motorola recommends you always use  
Motorola-branded batteries and chargers. The  
warranty does not cover damage caused by non-Motorola  
batteries and/or chargers.  
acknowledgments and required copyright notices for open source  
packages used in this Motorola mobile device, please select  
Main Menu > Java Apps > OpenSourceNotices. In addition,  
this Motorola device may include self-contained applications that  
present supplemental notices for open source packages used in  
those applications.  
Caution: Use of an unqualified battery or charger may  
present a risk of fire, explosion, leakage, or other hazard.  
Improper battery use, or use of a damaged battery, may  
result in a fire, explosion, or other hazard.  
Service and Repairs  
If you have questions or need assistance, we’re here to help.  
Go to www.motorola.com/support, where you can select from  
a number of customer care options. You can also contact the  
Motorola Customer Support Center at 1 (800) 453-0920 (United  
States), 1 (877) 483-2840 (TTY, TDD United States for hearing  
impaired).  
Battery usage by children should be supervised.  
Important: Motorola mobile devices are designed to work  
best with qualified batteries. If you see a message on your  
display such as Invalid Battery or Unable to Charge, take the  
following steps:  
Remove the battery and inspect it to confirm it bears a  
Motorola “Original Equipment” hologram;  
Legal and Safety  
94  
         
If there is no hologram, the battery is not a qualified  
battery;  
with the battery contact points, the battery could become  
very hot.  
If there is a hologram, replace the battery and retry  
charging it;  
Don’t place your battery near a heat source.  
Excessive heat can damage the phone or the battery. High  
temperatures can cause the battery to swell, leak, or  
malfunction. Therefore:  
If the message remains, contact a Motorola Authorized  
Service Center.  
Do not dry a wet or damp battery with an appliance or  
heat source, such as a hair dryer or microwave oven.  
When storing your battery, keep it in a cool, dry place.  
It is normal over time for battery life to decrease, and for  
the battery to exhibit shorter runtime between charges or  
require more frequent or longer charging times.  
Avoid leaving your phone in your car in high temperatures.  
DOs  
Important: Handle and store batteries properly to avoid  
injury or damage. Most battery issues arise from improper  
handling of batteries, and particularly from the continued use of  
damaged batteries.  
Do avoid dropping the battery or phone. Dropping  
these items, especially on a hard surface, can potentially  
cause damage.  
Do contact your service provider or Motorola if your  
phone or battery has been damaged from dropping  
or high temperatures.  
DON’Ts  
Don’t disassemble, crush, puncture, shred, or  
otherwise attempt to change the form of your  
battery.  
Important: Use Motorola Original products for quality  
assurance and safeguards. To aid consumers in identifying  
authentic Motorola batteries from non-original or counterfeit  
batteries (that may not have adequate safety protection), Motorola  
provides holograms on its batteries. Consumers should confirm  
that any battery they purchase has a “Motorola Original”  
hologram.  
Don’t let the phone or battery come in contact with  
water. Water can get into the phone’s circuits, leading to  
corrosion. If the phone and/or battery get wet, have them  
checked by your carrier or contact Motorola, even if they  
appear to be working properly.  
Motorola recommends you always use Motorola-branded  
batteries and chargers. Motorola mobile devices are designed  
to work with Motorola batteries. If you see a message on your  
Don’t allow the battery to touch metal objects. If  
metal objects, such as jewelry, stay in prolonged contact  
Legal and Safety  
95  
display such as Invalid Battery or Unable to Charge, take the following  
Warning: Never dispose of batteries in a fire because they may  
explode.  
steps:  
Remove the battery and inspect it to confirm that it has a  
“Motorola Original” hologram;  
Battery Charging  
If there is no hologram, the battery is not a Motorola  
battery;  
Notes for charging your phone’s battery:  
When charging your battery, keep it near room  
temperature. Never expose batteries to temperatures  
below 0°C (32°F) or above 45°C (113°F) when charging.  
If there is a hologram, replace the battery and retry  
charging it;  
If the message remains, contact a Motorola authorized  
service center.  
New batteries are not fully charged.  
New batteries or batteries stored for a long time may take  
more time to charge.  
Important: Motorola’s warranty does not cover damage to the  
phone caused by non-Motorola batteries and/or chargers.  
Motorola batteries and charging systems have circuitry  
that protects the battery from damage from overcharging.  
Warning: Use of a non-Motorola battery or charger may present a  
risk of fire, explosion, leakage, or other hazard.  
Proper and safe battery disposal and recycling: Proper  
battery disposal is not only important for safety, it benefits the  
environment. Consumers may recycle their used batteries in many  
retail or service provider locations. Additional information on  
proper disposal and recycling may be found on the Web:  
Specific Absorption Rate  
Your model wireless phone meets the governmental  
requirements for exposure to radio waves.  
Your mobile device is a radio transmitter and receiver. It is  
designed and manufactured to not exceed limits for exposure to  
radio frequency (RF) energy set by the Federal Communications  
Commission (FCC) of the U.S. Government and by the Canadian  
regulatory authorities. These limits are part of comprehensive  
guidelines and establish permitted levels of RF energy for the  
general population. The guidelines are based on standards that  
www.motorola.com/recycling  
www.rbrc.org/call2recycle/ (in English only)  
Disposal: Promptly dispose of used batteries in accordance with  
local regulations. Contact your local recycling center or national  
recycling organizations for more information on how to dispose of  
batteries.  
Legal and Safety  
96  
   
were developed by independent scientific organizations through  
periodic and thorough evaluation of scientific studies. The  
standards include a substantial safety margin designed for the  
safety of all persons, regardless of age or health, and to account  
for any variations in measurements.  
depending upon available accessories and regulatory  
requirements. The SAR information includes the Motorola testing  
protocol, assessment procedure, and measurement uncertainty  
range for this product.  
While there may be differences between the SAR levels of various  
mobile devices and at various positions, they meet the  
governmental requirements for safe exposure. Please note that  
improvements to this product model could cause differences in the  
SAR value for later products; in all cases, products are designed to  
be within the guidelines.  
The exposure standard for mobile devices employs a unit of  
measurement known as the Specific Absorption Rate (SAR). The  
SAR limit set by the FCC and by the Canadian regulatory  
authorities is 1.6 watts per kilogram (W/kg), averaged over one  
gram of tissue. Tests for SAR are conducted using procedures  
accepted by the FCC and by Industry Canada with the mobile  
device transmitting at its highest certified power level in all tested  
frequencies. Although the SAR is determined at the highest  
certified power level, the actual SAR level of the mobile device  
while operating can be below the maximum value. This is because  
the mobile device is designed to operate at multiple power levels  
so as to use only the power required to reach the network. In  
general, the closer you are to a wireless base station, the lower  
the power output.  
Additional information on SAR can be found on the Cellular  
Telecommunications & Internet Association (CTIA) Web site:  
http://www.phonefacts.net  
or the Canadian Wireless Telecommunications Association (CWTA)  
Web site:  
http://www.cwta.ca  
AGPS and Emergency Calls  
When you make an emergency call, your mobile device can use  
Assisted Global Positioning System (AGPS) satellite signals to tell  
the emergency response center your approximate location.  
Before a mobile device is available for sale to the public in the U.S.  
and Canada, it must be tested and certified to the FCC and Industry  
Canada that it does not exceed the limit established by each  
government for safe exposure. The tests are performed in  
positions and locations (e.g., at the ear and worn on the body)  
submitted to the FCC and available for review by Industry Canada.  
The highest SAR value for this mobile device when tested for use  
at the ear is 0.88 W/kg, and when worn on the body, as described  
in this guide, is 1.15 W/kg. Body-worn measurements can differ,  
The AGPS feature has limitations, so always tell the emergency  
response center your best knowledge of your location. Remain on  
the phone for as long as the emergency response center instructs  
you.  
Legal and Safety  
97  
 
AGPS might not work for emergency calls, if your local  
emergency response center does not process AGPS location  
information. For details, contact your local authorities.  
Motorola Limited Warranty for the  
United States and Canada  
If your mobile device cannot find strong AGPS satellite signals, the  
location of the nearest cell tower in contact with your mobile  
device is automatically provided to the emergency response  
center.  
What Does this Warranty Cover?  
Note: FOR IDEN SUBSCRIBER PRODUCTS, ACCESSORIES  
AND SOFTWARE PURCHASED IN THE UNITED STATES OR  
CANADA  
AGPS Performance Tips  
Subject to the exclusions contained below, Motorola, Inc. warrants  
its Motorola iDEN Digital Mobile and Portable Handsets  
("Products"), Motorola-branded or certified accessories sold for  
use with these Products ("Accessories") and Motorola software  
contained on CD-Roms or other tangible media and sold for use  
with these Products ("Software") to be free from defects in  
materials and workmanship under normal consumer usage for the  
period(s) outlined below. This limited warranty is a  
consumer's exclusive remedy, and applies as follows to  
new Products, Accessories and Software purchased by  
consumers in the United States or Canada, which are  
accompanied by this written warranty:  
Go outside and away from underground locations, covered  
vehicles, structures with metal or concrete roofs, tall  
buildings, and foliage. Indoor performance might improve  
if you move closer to windows, but some window sun  
shielding films can block satellite signals.  
Move away from radios, entertainment equipment, and  
other electronic devices that might interfere with or block  
AGPS satellite signals.  
AGPS uses satellites controlled by the U.S. government and  
subject to changes implemented in accordance with the  
Department of Defense AGPS user policy and the Federal Radio  
Navigation Plan. These changes might affect AGPS performance.  
Products Covered  
Length of Coverage  
Products as defined  
above.  
Ninety (90) days from the date of  
purchase by the first consumer  
purchaser of the product.  
Legal and Safety  
98  
 
Batteries. Only batteries whose fully charged capacity falls below  
80% of their rated capacity and batteries that leak are covered by  
this limited warranty.  
Products Covered  
Length of Coverage  
Accessories as  
defined above.  
Ninety (90) days from the date of  
purchase by the first consumer  
purchaser of the product.  
Abuse & Misuse. Defects or damage that result from: (a)  
improper operation, storage, misuse or abuse, accident or neglect,  
such as physical damage (cracks, scratches, etc.) to the surface of  
the product resulting from misuse; (b) contact with liquid, water,  
rain, extreme humidity or heavy perspiration, sand, dirt or the like,  
extreme heat, or food; (c) use of the Products or Accessories for  
commercial purposes or subjecting the Product or Accessory to  
abnormal usage or conditions; or (d) other acts which are not the  
fault of Motorola, are excluded from coverage.  
Products or  
The balance of the original  
warranty or for ninety (90) days  
from the date returned to the  
consumer, whichever is longer.  
Accessories that are  
Repaired or  
Replaced.  
Software as defined  
above. Applies only to  
physical defects in the  
media that embodies  
the copy of the software  
(e.g. CD-ROM, or floppy  
disk).  
Ninety (90) days from the date  
of purchase  
.
Use of Non-Motorola Products and Accessories. Defects or  
damage that result from the use of Non-Motorola branded or  
certified Products, Accessories, Software or other peripheral  
equipment are excluded from coverage.  
Unauthorized Service or Modification. Defects or damages  
resulting from service, testing, adjustment, installation,  
maintenance, alteration, including without limitation, software  
changes, or modification in any way by someone other than  
Motorola, or its authorized service centers, are excluded from  
coverage.  
What is not covered? (Exclusions)  
Normal Wear and Tear. Periodic maintenance, repair and  
replacement of parts due to normal wear and tear are excluded  
from coverage.  
Ornamental Decorations. Ornamental decorations such as  
emblems, graphics, rhinestones, jewels, gemstones and their  
settings, and other decorative elements, are excluded from  
coverage.  
Altered Products. Products or Accessories with (a) serial  
numbers or date tags that have been removed, altered or  
obliterated; (b) broken seals or that show evidence of tampering;  
(c) mismatched board serial numbers; or (d) nonconforming or  
Legal and Safety  
99  
non-Motorola housings, antennas, or parts, are excluded from  
coverage.  
How to Obtain Warranty Service or Other Information? To  
obtain service or information, please call:  
Communication Services. Defects, damages, or the failure of  
Products, Accessories or Software due to any communication  
service or signal you may subscribe to or use with the Products,  
Accessories or Software is excluded from coverage.  
Motorola iDEN Customer Services 1-800-453-0920 or  
954-723-4910  
TTY-877-483-2840  
Or visit us online at http://www.motorola.com/iden  
Software Embodied in Physical Media. No warranty is made  
that the software will meet your requirements or will work in  
combination with any hardware or software applications provided  
by third parties, that the operation of the software products will be  
uninterrupted or error free, or that all defects in the software  
products will be corrected.  
You will receive instructions on how to ship the Products,  
Accessories or Software, at your expense, to a Motorola  
Authorized Repair Center. To obtain service, you must include: (a) a  
copy of your receipt, bill of sale or other comparable proof of  
purchase; (b) a written description of the problem; (c) the name of  
your service provider, if applicable; (d) the name and location of the  
installation facility (if applicable) and, most importantly; (e) your  
address and telephone number.  
Software NOT Embodied in Physical Media. Software that is  
not embodied in physical media (e.g. software that is downloaded  
from the internet), is provided "as is" and without warranty.  
What Other Limitations Are There? ANY IMPLIED  
Who is covered? This warranty extends only to the first  
consumer purchaser, and is not transferable.  
WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED  
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A  
PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF  
THIS LIMITED WARRANTY, OTHERWISE THE REPAIR,  
What will Motorola Do? Motorola, at its option, will at no  
charge repair, replace or refund the purchase price of any Products,  
Accessories or Software that does not conform to this warranty.  
We may use functionally equivalent  
reconditioned/refurbished/pre-owned or new Products,  
Accessories or parts. No data, software or applications added to  
your Product, Accessory or Software, including but not limited to  
personal contacts, games and ringer tones, will be reinstalled. To  
avoid losing such data, software and applications please create a  
back up prior to requesting service.  
REPLACEMENT, OR REFUND AS PROVIDED UNDER THIS EXPRESS  
LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE  
CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER  
WARRANTIES, EXPRESS OF IMPLIED. IN NO EVENT SHALL  
MOTOROLA BE LIABLE, WHETHER IN CONTRACT OR TORT  
(INCLUDING NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE  
PURCHASE PRICE OF THE PRODUCT, ACCESSORY OR SOFTWARE,  
OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR  
Legal and Safety  
100  
CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF  
REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF  
INFORMATION OR DATA, SOFTWARE OR APPLICATIONS OR  
OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION  
WITH THE ABILITY OR INABILITY TO USE THE PRODUCTS,  
ACCESSORIES OR SOFTWARE TO THE FULL EXTENT THESE  
DAMAGES MAY BE DISCLAIMED BY LAW.  
purchaser in any such suit which are attributable to any such  
claim, but such defense and payments are conditioned on the  
following:  
That MOTOROLA will be notified promptly in writing by  
such purchaser of any notice of such claim;  
That MOTOROLA will have sole control of the defense of  
such suit and all negotiations for its settlement or  
compromise; and  
Some states and jurisdictions do not allow the limitation or  
exclusion of incidental or consequential damages, or limitation on  
the length of an implied warranty, so the above limitations or  
exclusions may not apply to you. This warranty gives you specific  
legal rights, and you may also have other rights that vary from  
state to state or from one jurisdiction to another.  
Should the Product or parts become, or in MOTOROLA’S  
opinion be likely to become, the subject of a claim of  
infringement of a patent, that such purchaser will permit  
MOTOROLA, at its option and expense, either to procure  
for such purchaser the right to continue using the Product  
or parts or to replace or modify the same so that it  
becomes non infringing or to grant such purchaser a credit  
for the Product or parts as depreciated and accept its  
return. The depreciation will be an equal amount per year  
over the lifetime of the Product or parts as established by  
MOTOROLA.  
Laws in the United States and other countries preserve for  
Motorola certain exclusive rights for copyrighted Motorola  
software such as the exclusive rights to reproduce and distribute  
copies of the Motorola software. Motorola software may only be  
copied into, used in, and redistributed with, the Products  
associated with such Motorola software. No other use, including  
without limitation disassembly of such Motorola software or  
exercise of the exclusive rights reserved for Motorola, is  
permitted.  
MOTOROLA will have no liability with respect to any claim of  
patent infringement which is based upon the combination of the  
Product or parts furnished hereunder with software, apparatus or  
devices not furnished by MOTOROLA, nor will MOTOROLA have  
any liability for the use of ancillary equipment or software not  
furnished by MOTOROLA which is attached to or sued in  
Patent and Software Provisions:  
MOTOROLA will defend, at its own expense, any suit brought  
against the end user purchaser to the extent that it is based on a  
claim that the Product or parts infringe a patent, and Motorola will  
pay those costs and damages finally awarded against the end user  
connection with the Product or any parts thereof. In no event shall  
MOTOROLA be liable for any incidental, special or consequential  
Legal and Safety  
101  
damages arising from any claim of patent infringement or alleged  
infringement.  
The wireless telephone industry has developed ratings for some of  
their mobile phones, to assist hearing device users in finding  
phones that may be compatible with their hearing devices. Not all  
phones have been rated. Phones that are rated have the rating on  
their box or a label on the box.  
Laws in the United States and other countries preserve for  
MOTOROLA certain exclusive rights for copyrighted MOTOROLA  
software, such as the exclusive rights to reproduce in copies and  
distribute copies of such MOTOROLA software. MOTOROLA  
software may be used in only the Product in which the software  
was originally embodied and such software in such Product may  
not be replaced, copied, distributed, modified in any way, or used  
to produce any derivative thereof. No other use including, without  
limitation, alteration, modification, reproduction, distribution, or  
reverse engineering of such MOTOROLA software or exercise or  
rights in such MOTOROLA software is permitted. No license is  
granted by implication, estoppel or otherwise under MOTOROLA  
patent rights or copyrights.  
The ratings are not guarantees. Results will vary depending on the  
user’s hearing device and hearing loss. If your hearing device  
happens to be vulnerable to interference, you may not be able to  
use a rated phone successfully. Trying out the phone with your  
hearing device is the best way to evaluate it for your personal  
needs.  
M-Ratings: Phones rated M3 or M4 meet FCC requirements and  
are likely to generate less interference to hearing devices than  
phones that are not labeled. M4 is the better/higher of the two  
ratings.  
T-Ratings: Phones rated T3 or T4 meet FCC requirements and are  
likely to be more usable with a hearing device’s telecoil (“T  
Switch” or “Telephone Switch”) than unrated phones. T4 is the  
better/higher of the two ratings. (Note that not all hearing devices  
have telecoils in them.)  
Hearing Aid Compatibility With Mobile  
Phones  
Some Motorola phones are measured for compatibility with  
hearing aids. If the box for your particular model has “Rated for  
Hearing Aids” printed on it, the following explanation applies.  
Hearing devices may also be measured for immunity to this type of  
interference. Your hearing device manufacturer or hearing health  
professional may help you find results for your hearing device. The  
more immune your hearing aid is, the less likely you are to  
experience interference noise from mobile phones.  
When some mobile phones are used near some hearing devices  
(hearing aids and cochlear implants), users may detect a buzzing,  
humming, or whining noise. Some hearing devices are more  
immune than others to this interference noise, and phones also  
vary in the amount of interference they generate.  
Legal and Safety  
102  
   
Information From the World Health  
Organization  
Present scientific information does not indicate the need for any  
special precautions for the use of mobile phones. If you are  
concerned, you may want to limit your own or your children’s RF  
exposure by limiting the length of calls or by using hands-free  
devices to keep mobile phones away from your head and body.  
Wireless: The New Recyclable  
Your wireless phone can be recycled. Recycling your phone  
reduces the amount of waste disposed in landfills and allows  
recycled materials to be incorporated into new products.  
The Cellular Telecommunications Industry Association (CTIA) and  
its members encourage consumers to recycle their phones and  
have taken steps to promote the collection and environmentally  
sound recycling of end-of-life devices.  
Source: WHO Fact Sheet 193  
As a phone user, you have an important role in ensuring that this  
device is recycled properly. When it comes time to give this phone  
up or trade it in for a new one, please remember that the phone,  
the charger, and many of its accessories can be recycled. It's easy.  
To learn more about CTIA's Recycling Program for Used Wireless  
Devices, please visit us at:  
Further information: http://www.who.int./peh-emf  
.
Product Registration  
Online Product Registration:  
www.motorola.com/us/productregistration  
http://recycling.motorola.young-america.com/ index.html  
Product registration is an important step toward enjoying your new  
Motorola product. Registering permits us to contact you for  
product or software updates and allows you to subscribe to  
updates on new products or special promotions. Registration is not  
required for warranty coverage.  
California Perchlorate Label  
Some mobile phones use an internal, permanent backup battery on  
the printed circuit board that may contain very small amounts of  
perchlorate. In such cases, California law requires the following  
label:  
Perchlorate Material - special handling may apply. See  
www.dtsc.ca.gov/hazardouswaste/perchlorate  
There is no special handling required by consumers.  
Please retain your original dated sales receipt for your records. For  
warranty service of your Motorola Personal Communications  
Product you will need to provide a copy of your dated sales receipt  
to confirm warranty status.  
.
Thank you for choosing a Motorola product.  
Legal and Safety  
103  
           
manner to the extent allowed by law. Furthermore, the purchase of  
Motorola products shall not be deemed to grant either directly or  
by implication, estoppel, or otherwise, any license under the  
copyrights, patents, or patent applications of Motorola or any third  
party software provider, except for the normal, non-exclusive,  
royalty-free license to use that arises by operation of law in the  
sale of a product.  
Patent and Trademark Information  
MOTOROLA, the Stylized M Logo and all other trademarks  
indicated as such herein are trademarks of Motorola, Inc. ® Reg.  
U.S. Pat. & Tm. Off. © 2009 Motorola, Inc. All rights reserved.  
Microsoft and Microsoft Internet Explorer are registered  
trademarks of Microsoft Corporation.  
T9 is a trademark owned by Tegic Communications.  
T9®Text Input Patent and Trademark Information.  
Privacy and Data Security  
Motorola understands that privacy and data security are important  
to everyone. Because some features of your mobile device may  
affect your privacy or data security, please follow these  
This product is covered by U.S. Pat. 5,818,437, U.S. Pat. 5,953,541,  
U.S. Pat. 6,011,554 and other patents pending.  
Java and all other Java-based marks are trademarks or registered  
trademarks of Sun Microsystems, Inc. in the U.S. and other  
countries.  
recommendations to enhance protection of your information:  
Monitor access—Keep your mobile device with you and  
do not leave it where others may have unmonitored  
access. Lock your device’s keypad where this feature is  
available.  
All other product names or services mentioned in this manual are  
the property of their respective trademark owners.  
Keep software up to date—If Motorola or a  
software/application vendor releases a patch or software  
fix for your mobile device that updates the device’s  
security, install it as soon as possible.  
Software Copyright Notice  
Motorola products may include copyrighted Motorola and third  
party software stored in semiconductor memories or other media.  
Laws in the United States and other countries preserve for  
Motorola and third party software providers certain exclusive  
rights for copyrighted software, such as the exclusive rights to  
distribute or reproduce the copyrighted software. Accordingly, any  
copyrighted software contained in the Motorola products may not  
be modified, reverse-engineered, distributed, or reproduced in any  
Erase before recycling—Delete personal information  
or data from your mobile device prior to disposing of it or  
turning it in for recycling. For instructions on how to delete  
all personal information from your device, please contact  
your local service provider.  
Legal and Safety  
104  
     
Understanding AGPS—To provide location information  
for emergency calls, certain Motorola mobile devices  
incorporate Assisted Global Positioning System (AGPS)  
technology. AGPS technology also can be used in  
non-emergency applications to track and monitor a user’s  
location—for example, to provide driving directions. Users  
who prefer not to permit such tracking and monitoring  
should avoid using such applications.  
Get to know your Motorola mobile device and its  
features such as speed dial and redial. If available,  
these features help you to place your call without taking  
your attention off the road.  
When available, use a handsfree  
device. If possible, add an additional  
layer of convenience to your phone with  
one of the many Motorola Original  
handsfree accessories available today.  
If you have further questions regarding how the use of your mobile  
device may impact your privacy or data security, please contact  
Motorola at [email protected], or contact your service  
provider.  
Position your mobile device within easy reach. Be  
able to access your phone without removing your eyes  
from the road. If you receive an incoming call at an  
inconvenient time, if possible, let your voice mail answer  
it for you.  
Smart Practices While Driving  
Drive Safe, Call Smart SM  
Let the person you are speaking with know you are  
driving; if necessary, suspend the call in heavy  
traffic or hazardous weather conditions. Rain, sleet,  
snow, ice, and even heavy traffic can be hazardous.  
Check the laws and regulations on the use of phones and  
their accessories in the areas where you drive. Always  
obey them. The use of these devices may be prohibited or  
restricted in certain areas—for example handsfree use  
only. Go to www.motorola.com/callsmart (in English only)  
for more information.  
Your mobile device lets you communicate by voice and  
data—almost anywhere, anytime, wherever wireless service is  
available and safe conditions allow. When driving a car, driving is  
your first responsibility. If you choose to use your phone while  
driving, remember the following tips:  
Do not take notes or look up phone numbers while  
driving. Jotting down a “to do” list or going through your  
address book takes attention away from your primary  
responsibility, driving safely.  
Dial sensibly and assess the traffic; if possible,  
place calls when your car is not moving or before  
pulling into traffic. If you must make a call while  
moving, dial only a few numbers, check the road and your  
mirrors, then continue.  
Legal and Safety  
105  
   
Do not engage in stressful or emotional  
conversations that may be distracting. Make people  
you are talking with aware you are driving and suspend  
conversations that can divert your attention away from the  
road.  
Use your mobile device to call for help. Dial 911 or  
other local emergency number in the case of fire, traffic  
accident, or medical emergencies (wherever wireless  
phone service is available).  
Use your mobile device to help others in  
emergencies. If you see an auto accident, crime in  
progress, or other serious emergency where lives are in  
danger, call 911 or other local emergency number  
(wherever wireless phone service is available), as you  
would want others to do for you.  
Call roadside assistance or a special  
non-emergency wireless assistance number when  
necessary. If you see a broken-down vehicle posing no  
serious hazard, a broken traffic signal, a minor traffic  
accident where no one appears injured, or a vehicle you  
know to be stolen, call roadside assistance or other  
special non-emergency wireless number (wherever  
wireless phone service is available).  
Legal and Safety  
106  
www.motorola.com  
NNTN7815A  
@NNTN7815A@  
xxxxxxxx xx xx MAY/09  
Printed in USA  

MTD 242 650A User Manual
Motorola HELLOMOTO Z6 User Manual
Motorola GSM V300 User Manual
Melissa 245051 User Manual
Maxtor ONETOUCH III 400 User Manual
LG Electronics 870 User Manual
LaCie Rugged eSata User Manual
HTC NM8VOGU100 User Manual
Hitachi Deskstar HDS721064CLA632 User Manual
Clarion VXZ646 User Manual