Magnadyne Stereo Receiver M5100CD User Manual

M5100CDUMFinal 2/1/05 4:58 PM Page 1  
Installation and  
Operation Manual  
POWER  
EJECT  
DIM  
LOUD  
ELAPSE  
AS/PS  
SHIFT  
SCAN  
PULL OPEN  
4 X 50W  
MARINE CD RECEIVER  
MODE  
U
PGM  
EQ  
SHIFT  
CH  
TRK  
TUNE  
TRK  
BAND  
DISP  
SEL  
MUTE  
TUNE  
MONO  
1 MEM  
2 PGM  
3 RPT  
4 RDM  
5 INT  
M5100CD  
Waterproof  
AM/FM/WB and CD Stereo Receiver  
A Registered Trademark of Magnadyne Corporation  
US Patent Number D 500,303 S  
 
M5100CDUMFinal 2/1/05 4:58 PM Page 3  
Location and Function of Controls at a Glance  
8. Multi-Function Button 3/RPT:  
Radio:  
Recalls a memorized radio station, and programs a radio station into memory  
(See Radio Operation for more information).  
Continuously repeats the same track (See CD Operation for more information).  
CD:  
9. Multi-Function Button 4/RDM:  
Radio: Recalls a memorized radio station, and programs a radio station into memory  
(See Radio Operation for more information).  
Plays all tracks on the current disc in random order (See CD Operation for more information).  
CD:  
10. Multi-Function Button 5/INT:  
Radio: Recalls a memorized radio station, and programs a radio station into memory  
(See Radio Operation for more information).  
Plays the first several seconds of each track on the current disc  
(See CD Operation for more information).  
CD:  
11. Band Button: Selects the radio band in the following order: FM1, FM2, FM3, AM, WX.  
12. Mono Button: Changes FM radio reception from Mono to Stereo.  
13. Display Button: Displays either the clock or radio frequency. (See setting the clock for more  
information).  
14. EQ Button: Selects preprogrammed equalizer settings in the following order: POP (Pop), JAZ (Jazz),  
CLA (Classical), JAM (Jam), ROC (Rock) and FLA (Flat).  
15. Shift and Scan Button:  
Shift Button:  
Enables the unit to scroll through the CD's (using Track/Tune Up and Down Buttons)  
when a CD Changer is connected.  
Scans through the strong stations in the current radio band.  
Scan Button  
:
16. Elapse and AS/PS Button:  
Radio: Automatic memory storing and preset scan (See Radio operation for more information).  
D: Displays elapsed time of current CD track or time remaining on the current CD.  
C
17. Eject Button: Ejects the disc from the CD slot when the CD door is open.  
18. Play/Pause and Mute Button:  
Radio/Aux In: Mutes audio level.  
CD:  
Starts CD play function or pauses CD play function.  
19. CD Slot: Located behind the Waterproof CD Cover; insert discs here.  
20. Display Area: Displays Radio, CD and Clock functions.  
21. Reset Button: Resets control logic of CPU in the event of a lockup. See General Operations/Reset  
button for more details.  
22. Waterproof CD Cover: To access the CD Slot, press down the tab on the top of the cover.  
23. Audio Mode Selection Button: Selects the desired audio mode in the following order: Volume, Bass,  
Treble, Balance and Fader.  
3
 
M5100CDUMFinal 2/1/05 4:58 PM Page 4  
Radio Operation  
Listening to the Radio  
Programming the Radio  
You can program up to 15 FM radio stations and 5 AM  
radio stations.  
1. Push the “POWER” button (1) once to turn the unit on.  
2. Press the “BAND” button (11) to select a radio  
band: FM1, FM2, FM3, AM or WX (weather band).  
Manual Station Recall Programming  
1. Press the “BAND” button (11) to select a radio  
band: FM1, FM2, FM3 or AM.  
3. AM or FM Station Selection  
Automatic Seek Station Selection: Press the 2. Select the desired station.  
TRK/TUNE DN or TRK/TUNE UP button (5) to  
automatically seek the next strong station.  
3. Press and hold one of the five station recall buttons  
(6-10), the button number and “CH” will appears in  
the display area. Release the button.  
4. Repeat the Steps 1-3 to memorize additional  
stations as desired.  
SCAN  
Scan Station Selection: Press the  
button  
(15) to automatically scan through strong  
stations in the current radio band. The radio  
will pause for 5 seconds at each strong station.  
Each frequency will flash in the display. Press  
the scan button again to hold the current station.  
Automatic Station Store  
1. Press the “BAND” button (11) to select a radio  
band: FM1, FM2, FM3 or AM.  
Manual Station Selection: Press the TRK/TUNE  
DN or TRK/TUNE UP button for more than 3  
seconds to manually select stations, and “MAN”  
will appear in the display. Use either button to  
manually seek up and down the frequency scale.  
Note: If either button is not pressed for several  
seconds, the unit will return to Automatic Seek  
“AUTO” will appear in the display.  
AS/PS  
2. Press the  
button (16) for more than 2  
seconds, the radio will then search the current  
frequency and check the signal strength until the  
five strongest stations are stored into the correspond-  
ing preset number button. When completed, the  
system will scan the stored stations automatically.  
Preset Scan  
Press the  
AS/PS  
Weather Band Station Selection (WX)  
button (16) to scan the preset  
stations. The radio will hold at that preset number  
for several seconds, then will scan again. To stop  
Press the “BAND” button until WX appears on  
the display, then use the TRK/TUNE DN or  
TRK/TUNE UP button to manually seek the stations.  
scanning when a desired station is reached press  
AS/PS  
the  
button again.  
Sound Controls  
Adjusting the Main Volume, Bass Treble, Balance  
and Fader.  
Adjusting the Audio Beep  
Press the button for more then 2 seconds  
SEL  
to turn beep On/Off. When the beep is on the  
icon will be displayed.  
1. Press the  
button (23) to select the desired  
SEL  
audio mode. The audio modes will be displayed in  
the following order: Volume, Bass, Treble,  
Balance and Fader.  
Adjusting the Loud Feature  
Press the LOUD button (2) to increase the bass  
and treble output, “LOUD” will then be displayed.  
Press the button again to release this function.  
2. Press the Main Volume  
adjust the sound of the audio mode selected.  
or  
buttons (4) to  
Note: The Bass and Treble levels can only be adjusted  
when the EQ setting is set to the “FLAT” setting.  
Mute  
In Radio/Aux In mode, press the  
mute audio level. Press the button again to  
release this function.  
button (18)  
Initial Volume Level  
To program the Initial Volume Level, adjust the  
volume to the desired level, then press the  
“POWER” button for more than 3 seconds. The  
next time the unit is turned on, the volume will be  
at this initial level.  
4
 
M5100CDUMFinal 2/1/05 4:58 PM Page 5  
General Operations  
Setting the Clock  
Selecting a Mode  
1. Press DISP button (13) for more than 3 seconds  
until the clock shown in the display area is flashing.  
2. Press the TRK/TUNE DN button to adjust the  
hours  
Press the MODE button (3) to step sequentially  
through the following sources: Radio Mode to  
Radio Tuner > CD > CD Changer (optional) >  
Auxiliary > Radio Tuner.  
3. Press the TRK/TUNE UP button to adjust the  
minutes.  
Illumination Dimmer  
Press LOUD/DIMMER button (2) for more than 2  
seconds to adjust the brightness of the LCD  
display backlight.  
Display Priority  
Clock Display Priority  
Press and hold DISP button (13) while pressing  
the TRK/TUNE DN button to select Time Priority.  
Pressing the DISP button while in Time Priority  
will temporarily display selected station frequency.  
In CD Mode:  
When the display priority is set to “Time”, the  
time will be displayed.  
Pressing DISP button will temporarily display CD  
track number, time remaining or elapsed time  
depending on current CD display option selected.  
After 5 seconds the display will return to the clock.  
Reset Button (20)  
The Reset Button (21) is located behind the  
Waterproof CD Cover (22) and above the CD Slot.  
Activate the reset button with either a ballpoint  
pen tip or paper clip for the following reasons:  
• After initial installation of the unit is completed.  
• When the function buttons do not operate.  
• Error symbol in the display.  
If there is a disc in the slot when the reset button  
is pressed the disc will be ejected.  
Frequency Display Priority  
Press and hold DISP button while pressing the  
TRK/TUNE UP button to select Frequency  
Priority. Pressing DISP button while in Frequency  
Priority will temporarily display clock.  
In CD Mode:  
When the display priority is set to “Frequency”,  
the CD track number will be displayed.  
Pressing the DISP button will temporarily display  
the clock. After 5 seconds the display will return  
to the CD display.  
CD Changer Operation (Optional)  
Select a Disc  
1. Load your CD Changer with compact discs per  
the manufacturer's operating instructions.  
Notes on CD-Rs and CD-RWs:  
The unit cannot play a CD-R and CD-RW that is  
not finalized. (Please refer to the manual of your  
CD-R/CD-RW recorder or CD-R/CD-RW software  
for more information on the finalizing process).  
This unit will not play MP3 music or WMA music  
recorded on any CD-R or CD-RW disc.  
Be sure to only use discs with the following labels  
in this unit:  
SCAN  
2. Press the  
Mode. “SHIFT” will then appear in the display,  
indicating the CD Changer is active.  
SHIFT button (15) to enter Shift  
3. Press the TRK/TUNE DN or TRK/TUNE UP (5)  
button to scroll through the CD’s loaded in the CD  
Changer. If there isn’t any operation for several  
seconds, the unit will exit Shift Mode automatically.  
5
 
M5100CDUMFinal 2/1/05 4:58 PM Page 6  
CD Player Operation  
Inserting and Ejecting a Disc  
Repeat these steps to program tracks in the  
2 PGM  
Pull the tab at the top of the CD Door, and the  
door will open. Push a disc into the CD Slot (19),  
label side up, and the disc will begin to play.  
The disc will eject automatically when the CD  
Door is opened.  
desired order. Then press the  
button to  
play the CD in programmed order. When you  
have programmed 32 tracks, “FULL” will appear  
in the display.  
When the CD is played in programmed order,  
2 PGM  
press the  
button to begin programmed  
Select Tracks  
play, then press it again to exit the PGM mode.  
Press the TRK/TUNE DN or TRK/TUNE UP button  
(5) to move to the previous track or next track.  
The track number appears in the Display Area.  
When the CD is playing in programmed order,  
1 MEM  
pressing the  
button will clear all the pro-  
grammed content and “CLR” will appear in the  
display.  
If you don’t press the  
out program setting, press the  
(8), “NO-P” will appear in the display.  
Fast Forward and Fast Reverse  
1 MEM  
button (7) to carry  
Press and hold the TRK/TUNE DN or TRK/TUNE  
UP button (5) to fast forward or fast reverse. Disc  
play starts from when you release the button.  
2 PGM  
button  
Track/Time Display  
To display the running time/remaining time of a  
track, press the  
Pause Disc Play  
Press the  
Press it again to resume play.  
button (18) to pause the CD player.  
AS/PS  
ELAPSE button (16).  
Repeat the Same Track  
3 RPT  
Press the  
button (8) to continuously  
repeat the same track. Press it again to stop  
repeat.  
Play All Tracks in Random Order  
4 RDM  
Press the  
button (9) to play all tracks  
on the current disc in random order. Press it  
again to stop random play.  
Intro Scan  
Press the  
5 INT  
button (10) to play the first 10  
seconds of each track. Press it again to cancel the  
function and listen to the track.  
Program CD Tracks  
Use the Program function to select up to 32 CD  
tracks to play in any order. The Program function  
allows you to select a track number for each spot  
in the playing sequence. A CD must be inserted to  
use the Program function.  
1 MEM  
1. Press the  
button (7) to enter Program  
mode. PGM starts flashing and the “P-01”  
appears in the display.  
2. Press the TRK/TUNE DN or TRK/TUNE UP button  
to choose a track number. Then press the  
1 MEM  
button (7) to memorize it. Select the next  
track and it will memorized as “P-02”.  
6
 
M5100CDUMFinal 2/1/05 4:58 PM Page 7  
Waterproof Wired Remote General Operations (Optional)  
8
7
6
MODE  
VOLUME  
TRK  
TRK  
5
MUTE  
TUNE  
TUNE  
STEREO COMMANDER  
VOLUME  
POWER  
BAND  
SHIFT/SCAN  
1
2
3
4
1. Power Button: Press and release the  
button (1) to turn on/off the unit.  
To program the initial volume level, adjust the  
volume to the desired level, then press the  
POWER 5. Volume Buttons: Press the  
button to in-  
VOLUME  
VOLUME  
crease or the  
level.  
button decrease the volume  
POWER button for more than 3 seconds. The 6. Manual/Search Tuning and Track Selection  
next time the unit is turned on, the volume will be  
at this initial level.  
Buttons:  
For Radio Station Selection  
• Press and release the TRK/TUNE DN or  
TRK/TUNE UP button (6) to search up or down  
to the next strong station. Continue to press  
and release the buttons until the desired station  
is located.  
2. Band Button: Press the BAND button (2) to  
sequentially step through the following bands:  
FM1, FM2, FM3, AM and WX.  
3. Shift/Scan Button:  
For Radio Operation  
• Press and hold the TRK/TUNE DN or TRK/TUNE  
UP button for more than 3 seconds to activate  
Manual Tuning Mode (MAN will appear in the  
display). In Manual Tuning Mode you can  
quickly advance up or down the radio station  
scale by pressing and holding down the  
TRK/TUNE DN or TRK/TUNE UP buttons (6).  
• After several seconds of non-use, the button  
(6) tuning function will revert back to Search  
Mode (AUTO will appear in the display).  
Press the SHIFT/SCAN button (3) to scan through  
the strong stations in the current radio band. The  
radio will pause for five seconds at each strong  
station while flashing the frequency, then will con-  
tinue to scan. Pressing the SHIFT/SCAN button  
again will stop the scanning, and play the current  
station.  
For CD Changer (CDC) Operation  
Press the SHIFT/SCAN button (3) to enter Shift  
Mode. “SHIFT” will then appear in the display,  
indicating the CD Changer is active. To change  
the current CD, press the TRK/TUNE DN or  
TRK/TUNE UP button (5) to scroll through the  
CDs loaded in the CD Changer. If there isn’t any  
operation for several seconds, the unit will exit  
Shift Mode automatically.  
Station Selection for Weather Band Operations  
Press the TRK/TUNE DN or TRK/TUNE UP button  
(6) to select channels CH1 – CH7.  
Select Tracks for CD or CD Changer Operation  
Press the TRK/TUNE DN or TRK/TUNE UP button  
(6) to move to the previous track or next track.  
Press and hold the TRK/TUNE DN or TRK/TUNE  
UP button (6) for more than 3 seconds to activate  
fast rewind or fast forward of the disc. Disc play  
starts from when you release the button.  
4. Mute Button:  
For Radio Operation  
Press the  
button (4) to activate the audio  
MUTE  
mute function and “MUTE” will appear in the dis-  
play. Press the button once again to release mute 7. Mode Button: Press the MODE button (7) to step  
function and the unit will return to the last vol-  
ume position before it was muted.  
For CD/CD Changer Operation  
sequentially through the following sources:  
Radio Tuner > CD > CD Changer (optional)  
> Auxiliary > Radio Tuner.  
Press the  
player. Press it again to resume play.  
button (4) to pause the CD/CDC  
MUTE  
8. Display Area: This area displays Radio/CD func-  
tions, along with all other activated functions (8).  
7
 
M5100CDUMFinal 2/1/05 4:58 PM Page 8  
Waterproof Wired Remote Introduction  
This unit is a wired remote control made using a modified controller or similar layout. It is capable of  
operating the specified functions on the M5100CD receiver. The body, buttons, controls and display are  
UV and water-resistant. It includes a LCD and an illumination circuit.  
Take a moment to read through this section and become familiar with the operations and features of this  
outstanding product. It is advisable to keep this manual in your vehicle so it is readily available for refer-  
ence. Be sure to fill out and send in your warranty card to ensure that you receive the full benefits of war-  
ranty repair in the unlikely event that your system will need service.  
Installation Procedures  
Installing the Unit  
1. Using the foam adhesive backer of the remote as  
a template, determine the mounting location on  
the mounting surface and mark the three hole  
Mounting Surface  
Screws  
locations.  
Wire to Unit  
Mounting Surface  
Foam Adhesive  
Backer  
3.Remove the backer to the foam adhesive backer  
and adhere it to the back of the remote.  
4. Feed the remote wire through the 5/8" hole in the  
mounting surface and attach the remote to the  
mounting surface using the supplied screws.  
5. Attach the remote wire to the unit according to  
the wiring diagram on Page 11.  
Mounting Surface  
Note: The Wired Remote comes with an extension  
cord so the remote can be mounted a far distance  
from the receiver.  
Mark & Drill Holes  
2. Remove the foam adhesive backer and drill two  
3/8" and one 5/8" mounting holes in the marked  
positions.  
8
 
M5100CDUMFinal 2/1/05 4:58 PM Page 9  
Wiring  
Note: This unit is designed to connect to (4) four  
speakers. If the installation only requires (2) two  
speakers, use the White and Gray wire sets to con-  
nect the speakers.  
S
tep 1: The radio chassis is designed to be “Panel  
Mounted” through a opening in the mounting panel.  
See the installation part of this manual for panel  
mounting.  
Step 2: Bring all wiring for the connection of the  
unit (including the antenna) through the mounting  
hole. Connect the wiring as follows:  
WARNING!  
Any wires left unconnected must be taped-off  
or capped off to prevent shorting.  
Yellow Wire: Connect this wire to a constant +12  
volt power source (a power source that is not con-  
trolled by the ignition key).  
DO NOT connect speaker ground wires together.  
Red Wire(w/Fuse): Connect this wire to a switched +12  
volt power source (a power source turned on and off  
by the ignition key). The fuse has a rating of .5A.  
DO NOT connect speaker ground wires to the  
chassis of the vehicle.  
Blue Wire: Connect this wire to the (+) power  
antenna activation circuit. If no power antenna  
exists, tape-off the end of this wire to prevent short-  
ing out of the unit.  
DO NOT connect front and rear speaker wires  
together.  
FAILURE TO FOLLOW ANY OF THESE WARN-  
INGS WILL RESULT IN DAMAGE TO THIS  
UNIT AND VOIDS THE WARRANTY.  
Black Wire: Connect this wire to the frame of the  
vehicle (ground). This wire is the chassis grounding  
wire for the unit.  
White Wire: Connect this wire to the Left Main  
Speaker (+) positive terminal or wire.  
White Wire with Black Stripe: Connect this wire to the  
Left Main Speaker (-) negative terminal or wire.  
Green Wire: Connect this wire to the Left Remote  
Speaker (+) positive terminal or wire.  
Green Wire with Black Stripe: Connect this wire to the  
Left Remote Speaker (-) negative terminal or wire.  
Gray Wire: Connect this wire to the Right Main  
Speaker (+) positive terminal or wire.  
Gray Wire with Black Stripe: Connect this wire to the  
Right Main Speaker (-) negative terminal or wire.  
Purple Wire: Connect this wire to the Right Remote  
Speaker (+) positive terminal or wire.  
Purple Wire with Black Stripe: Connect this wire to the  
Right Remote Speaker (-) negative terminal or wire.  
Red/White RCA Connectors: Two sets of line out  
cables are provided for connections to external  
amplifiers.  
9
 
M5100CDUMFinal 2/1/05 4:58 PM Page 10  
Wiring Diagram  
M5100CD  
Antenna Socket  
Red  
Right Channel  
RCA Connectors  
Set 1  
Ignition  
Switch (+12v in )  
Red Wire  
Connect to Line Input  
of Optional Amplifier  
White  
Left Channel  
Battery  
(+12v in)  
Yellow Wire  
Black Wire  
Red  
Right Channel  
Ground (B-)  
RCA Connectors  
Set 2  
Power Antenna  
(Switched  
+12v out)  
Blue Wire  
Connect to Line Input  
of Optional Amplifier  
White  
Left Channel  
Left  
Front  
Speaker  
Right  
Front  
Speaker  
Gray Wire  
Gray Wire with Black Stripe  
White Wire  
White Wire with Black Stripe  
Left  
Rear  
Speaker  
Right  
Rear  
Speaker  
Green Wire  
Purple Wire  
Purple Wire with Black Stripe  
Green Wire with Black Stripe  
10  
 
M5100CDUMFinal 2/1/05 4:58 PM Page 11  
CD Changer Connection  
CD Changer  
M5100CD  
(Optional)  
Male to Male 8-Pin Din Cable  
(Supplied with CD changer)  
8-Pin Din Connector  
Auxiliary Connection  
VCR  
or  
Audio Out From  
VCR / TV /  
M5100CD  
Video Game  
TV  
Red RCA (Right)  
Auxiliary Audio Input  
RCA with Yellow Cables  
or  
White RCA (Left)  
Video Game  
Wired Remote Connection  
Wired Remote  
(Optional)  
M5100CD  
Female 8-Pin  
Mini Din Connector  
Male 8-Pin  
Mini Din Connector  
11  
 
M5100CDUMFinal 2/1/05 4:58 PM Page 12  
Installation  
Remove Transportation Screws  
Before installing the unit, remove the two  
screws shown in the illustration below.  
Mounting Surface  
Mounting  
Location  
Remove screws  
before installation  
Mounting  
Holes  
3. Use the glue paper to stick the two mounting  
brackets to the back of the mounting surface.  
The screw holes of the brackets must respec-  
tively aim at the mounting holes in order to fix  
the unit to the mounting surface.  
Note: If this unit is to be installed in a boat or a  
spa, you should use the two pieces of plastic  
film (30 mm X 20 mm) supplied to seal the two  
holes after removing the screws.  
Mounting  
Surface  
Mounting  
Brackets  
Installing the Unit  
1. Using the mounting paper template supplied  
with the unit, determine the mounting location  
and then stick the template on the location.  
Mounting Surface  
4. Open the two pieces of rubber cover on the unit to  
display the four screw holes then using four screws  
(M4X30) to mount the unit to the dashboard.  
Template  
Mounting Surface  
Rubber  
Cover  
2. Cut and remove the hatching area on the tem-  
plate. Then drill four 1/8" mounting holes in the  
exact position according to the mounting paper.  
Screws  
Rubber Cover  
12  
 
M5100CDUMFinal 2/1/05 4:58 PM Page 13  
Installation  
Sheet Metal  
Screw  
Nut  
Washer  
Metal Strap  
Mounting Surface  
Trouble Shooting  
Before going through the trouble shooting table below, check the wiring connection. If the problem persist,  
consult your nearest service dealer.  
SYMPTOM  
CAUSE  
SOLUTION  
No power  
The ACC Power Supply is not  
connected.  
Both the red and yellow  
wires require power from the  
power source.  
The fuse is blown.  
Replace the fuse.  
Disc cannot be loaded,  
played or ejected  
Presence of disc inside the player.  
Remove the disc in the player, and  
replace it with another disc.  
Disc was inserted upside down.  
Insert the compact disc with the  
label facing up.  
Compact disc is extremely dirty or  
disc is defective.  
Clean the disc or try playing a  
another disc.  
Temperature inside the unit is  
too high.  
Allow the unit to cool off,  
then try again.  
Condensation.  
Leave the player off for an hour, then  
try playing it again.  
No sound  
Volume is set at the minimum level.  
Adjust volume to the desired level.  
Speaker wiring is not properly connected. Check the wiring connection.  
Sound skips  
The installation angle is more  
than 30 degrees.  
Adjust the installation angle to less  
than 30 degrees.  
Compact disc is extremely dirty or  
disc is defective.  
Clean the disc or try playing a  
another disc.  
The operation keys  
do not work  
The built-in microcomputer  
is not operating properly  
due to noise.  
Press the RESET button.  
Front panel is not properly fixed  
into its place.  
The radio does not work  
The antenna cable is not connected.  
Insert the antenna cable firmly.  
The radio station automatic The signals are too weak.  
does not work  
Select a station manually.  
13  
 
M5100CDUMFinal 2/1/05 4:58 PM Page 14  
Specifications  
GENERAL  
Power Supply  
Requirements:  
DC 12 Volts, Negative  
Ground  
CD PLAYER  
Signal to Noise Ratio:  
> 55 dB  
AM RADIO  
Frequency Coverage:  
530 to 1720 kHz  
Channel Separation:  
> 50 dB  
Sensitivity (S/N=20dB):  
32 dBu  
Chassis Dimensions:  
178 mm (W) x 165 (D) x  
50 (H)  
Frequency Response:  
40Hz – 18 kHz  
Tone Controls:  
Bass: 100 Hz 10 dB  
Treble: 10 kHz 10 dB  
FM RADIO  
Frequency Coverage:  
87.5 to 107.9 MHz  
Maximum Output Power:  
4 x 50 watts  
Sensitivity (S/N=30dB):  
3µV  
Current Drain:  
15 Ampere (Max.)  
Stereo Separation:  
> 30dB  
Warranty  
ONE (1) YEAR LIMITED WARRANTY  
Magnadyne Corporation or its authorized agents will within one year from the date of sale to you,  
repair, replace or refund the retail sales price of said product or any part thereof, at the option of  
the Magnadyne Corporation or its authorized agents, if said product or part is found defective in  
materials or workmanship, when properly connected and operating on the correct power require-  
ments designated for the specific product. This warranty and Magnadyne Corporation or its autho-  
rized agents obligations hereunder do not apply where the product was; damaged while in the pos-  
session of the consumer, subjected to unreasonable or unintended use, not reasonably main-  
tained, utilized in commercial or industrial operations, or serviced by anyone other than  
Magnadyne Corporation or its authorized agents, or where the warning seal on the product is bro-  
ken or the power and/or plugs are detached from the unit. Magnadyne Corporation or any of its  
authorized agents will not assume any labor costs for the removal and reinstallation of any prod-  
uct found to be defective, or the cost of transportation to Magnadyne Corporation or its authorized  
agents. Such cost are the sole responsibility of the purchaser.  
This warranty does not cover the cabinet appearance items or accessories used in connection with  
this product, or any damage to recording or recording tape, or any damage to the products result-  
ing from improper installation, alteration, accident, misuse, abuse or acts of nature.  
MAGNADYNE CORPORATION OR ITS AUTHORIZED AGENTS SHALL NOT BE LIABLE TO  
ANYONE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES OR CLAIMS EXCEPT THOSE  
ACCORDED BY LAW. NO EXPRESSED WARRANTY OR IMPLIED WARRANTY IS GIVEN  
EXCEPT THOSE SET FORTH HEREIN. NO IMPLIED WARRANTY SHALL EXTEND BEYOND  
ONE YEAR FROM THE DATE OF SALE.  
This warranty extends only to the original purchaser of the product and is not  
transferable. Some states do not allow limitations on how long an implied warranty lasts, and  
some states do not allow the exclusion or limitation of incidental or consequential damages,  
so the above limitations or exclusion may not apply to you. This warranty gives you specific  
legal rights, and you may have other rights that vary from state to state.  
Defective merchandise should be returned to the original point of purchase or secondly, to:  
Magnadyne Corporation, 1111 W. Victoria Street, Compton CA 90220  
Return Authorization must be obtained before sending, or merchandise may be refused.  
 
M5100CDUMFinal 2/1/05 4:58 PM Page 16  
A Registered Trademark of Magnadyne Corporation  
© Copyright 2003 Magnadyne Corporation  
M5100CDUM Rev. B 2-05  
 

Land Pride Automobile 2007 Range Rover Sport User Manual
Lasko Fan 6410 User Manual
LG Electronics DVD Recorder LRA 516 User Manual
LG Electronics Flat Panel Television 22LB4510 User Manual
Life Fitness Home Gym X3 5 User Manual
Manitowoc Ice Indoor Furnishings 7623123 User Manual
Martin Audio Portable Speaker W8C User Manual
M Audio Computer Monitor _QSG_DE01 User Manual
Maytag Microwave Oven UMC5200AA User Manual
Meco Charcoal Grill 2000 Brazier User Manual